Dupont Sveg User And Maintenance Manual
Sveg
www.dupont-medical.com
USER’S GUIDE
Comfort lift chair
A DUPONT MEDICAL trademark
USER AND MAINTENANCE MANUAL FOR SVEG COMFORT LIFT CHAIR
2
FOREWORD
Thank you and congratulations for buying a
DUPONT MEDICAL chair. Understanding well and
maintaining regularly the wheelchair will prolong its
service life. That is the reason why we recommend
reading this user and maintenance manual to better
know the wheelchair performances and qualities.
TABLE OF CONTENT
1 - PRECAUTIONS
1.1 - Particular precautions p 2
1.2 - Maintenance p 2
2 - ASSEMBLY INSTRUCTIONS
p 2
3 - WARRANTY CONDITIONS
p 3
4 - SPECIFICATIONS
p 3
The chair should be positioned at least 45 cm
from the walls.
The exclusive motorised mechanism is very powerful
and if the 45 cm clearance is not respected between
the chair and the walls, this can damage the electric
chair, as well as the walls.
The warranty will be void in this case.
Enjoy, sit down, relax, or stand up… all these movements
are now possible thanks to SVEG chair.
1. PRECAUTIONS
1.1 Particular precautions
Do not lift the feet off the floor when the chair is
rising. By familiarising himself/herself with the chair,
the user will find the ideal elevation to stand up from
the chair in the most comfortable way.
Do not use this chair if children or animals are
next to the moving parts. This chair motor is powerful
and could harm them.
Do not drop some water or other objects on the
manual control or on any other electrical component
of the chair.
1.2 Maintenance
The mechanical components should always be
clean.
Cleaning the upholstery
- The headrest and armrest protections are machine washable at 30°C maximum or hand washable
with washing liquid.
- The whole fixed padding of the chair can be dry
washed with soap in spray Dry with a dry cloth.
2. ASSEMBLY INSTRUCTIONS
- Before fixing the backrest to the seat, you should
plug the chair to a power outlet. The electrical cord
is in the side chair pocket.
- Once the seat is plugged to the power outlet, take
the manual control, which is also in the side pocket.
This control will remain on the chair side. Now, you
just have to plug, if it is not done yet, the electrical
cord to the manual control.
- On the manual control, hold down the “down”
button until the seat is totally tilted. The footrest
should now be in “high” position and the seat should
also be slightly tilted backwards so that both
mounting brackets of the backrest totally protrude
from the seat.
- The metal brackets fixed to the backrest are in the
back of the chair. There are two brackets in which
the backrest should be slided.
Pocket with the manual control and the electrical cord
Loading...