DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487 / 630-762-4032
Fax 630-584-5156
avservice@dukane.com
http://www.dukane.com/av/service/
Copyrights Dukane Corp . All rights reserved.
Dukane is a trademark that is currently being registered by Dukane Corp.
Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Dukane unless copying this file is for the purpose
of backup after purchasing this product.
In order to keep improving the product, Dukane hereby
reserves the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies without any intention of
infringement.
Disclaimer of warranties: Dukane is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.
English - 3
Chapter 1 Safety Instructions
Always follow these safety instructions when setting up and using the Document
Camera:
1. Do not place Document Camera in tilted position.
2. Do not place the Document Camera on an unstable trolley, stand or table.
3. Do not use the Document Camera near water or source of heat.
4. Use attachments only as recommended.
5. Use the type of power source indicated on the Document Camera. If you are
not sure of the type of power available, consult your dealer or local electricity
company for advice.
6. Place the Document Camera on a place that it can be unplugged easily.
7. Always take the following precautions when handling the plug. Failure to do
so may result in sparks or fire.
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extension cords or multi-way plug boards as
this may cause fire or electric shock.
9. Do not place the Document Camera where the cord can be stepped on as
this may result in fraying or damage to the lead or the plug.
10. Unplug the Document Camera from the wall socket before cleaning. Use a
damp cloth for cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the Document Camera case. They
provide ventilation and prevent the Document Camera from overheating. Do
not place the Document Camera on a sofa, rug or other soft surface or in a
built-in installation unless proper ventilation is provided.
12. Never push objects of any kind through cabinet slots. Never allow liquid of
any kind to spill into the Document Camera.
13. Except as specifically instructed in this User Manual, do not attempt to
operate this product by yourself. Opening or removing covers may expose
you to dangerous voltages and other hazards. Refer all servicing to licensed
service personnel.
14. Unplug the Document Camera during thunderstorms or if it is not going to be
used for an extended period. Do not place the Document Camera or remote
control on top of vibrating equipment or heated objects such as a car, etc.
15. Unplug the Document Camera from the wall outlet and refer serving to
licensed service personnel when the following situations happen:
If the power cord or plug becomes damaged or frayed.
If liquid is spilled into it or the Document Camera has been exposed to
rain or water.
<Note> Using an incorrect battery type in the remote control may result in
breakdown. Follow local instructions on how to dispose of used batteries.
English - 4
Caution: To reduce the risk of electric shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service personnel.
This symbol indicates
that this equipment may
contain dangerous
voltage which could
cause electric shock.
This symbol indicates that
there are important
operating and
maintenance instructions
in this User Manual with
this unit.
Note
Risk of Electric Shock
DO NOT OPEN
Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
This Document Camera has a 3-wire AC line Plug. This is a safety feature to
ensure that the plug will fit into the power outlet. Do not try to disable this safety
feature.
If the Document Camera will not be used for an extended time, unplug it from the
power socket.
FCC Warning
This Document Camera has been tested and found to comply with the limits for a
Class A computer device, pursuant to Article 15-J of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
commercial installation.
EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational
environment. It is not intended for residential use.
This is a Class A product. In a residential environment it may cause radio
interference, in which case the user may be required to take adequate measures.
The typical use is in a conference room, reception room or hall.
English - 5
Chapter 2 Package Contents
DVP510B
Quick Start Guide
Remote control
Remote Control
Holder
Power Adapter
Power cord
USB cable
VGA cable
Appearance may vary
depending on
country/region
Audio Cable
C-Video Cable
Microscope Adapter
English - 6
Chapter 3 Product Overview
1. Lens
2. Remote sensor
3. Remote Control Holder
4. Camera arm
5. Auxiliary floodlight and lamp arm
6. DIP switch setting
7. Input/output port
8. Backlight
9. Control panel
Projector
Computer
5
1
5
8 6 4
7 3 9
2
3.1 Relative Operation Position
English - 7
Chapter 4 Installation and Connections
Computer
Projector or
monitor
HDTV
TV
Projector or
monitor
Speaker
Computer
Computer
Computer
DVD or Computer
4.1 System diagram
English - 8
4.2 Installation and setup
Power
Adapter
AC outlet
Computer
Projector
USB cable
Power
cord
VGA cable
Power
Adapter
USB cable
Power
cord
AC outlet
VGA cable
Monitor or
projector
1. Please set up the DIP switch setting first. Refer to Chapter 10 DIP
Switch Setting.
4.3 Connecting to a projector or monitor
4.4 Connecting to a Computer and Use Dukane
Software or an Interactive Whiteboard (IWB)
The driver and software can be downloaded from Dukane website.
English- 9
4.5 Connecting to an HDTV
HDTV
Power cord
AC outlet
HDMI cable
Power Adapter
HDTV
Power
cord
AC outlet
HDMI cable
Power
Adapter
HDMI cable
DVD or Computer
4.6 For connection to Computer or DVD
English- 10
4.7 Connecting to a computer, projector, and monitor
VGA cable
Computer
Monitor
Projector
VGA cable
Power cord
AC outlet
VGA cable
Power
Adapter
Speaker
Computer
Power cord
AC outlet
Power Adapter
simultaneously
Press [SOURCE] button to switch the image source.
For VGA 1 setting, refer to 7.2 I would like to switch image sources.
For VGA 2 setting, refer to 7.3 I would like to set the image source of
VGA OUT2.
4.8 Connecting to Audio Input and Output
English- 11
4.9 Connecting to a computer with RS232
RS232 Cable
Computer
Power cord
AC outlet
Power
Adapter
DIP switch setting
C-Video Cable
Power cord
AC outlet
Power Adapter
After connecting to the RS232 cable, you can use RS232 commands to
control DVP510B.
4.10 Connecting to a TV
NTSC: USA, Canada, Mexico, Panama, Chile, Japan, Taiwan, Korea, and
PAL: Countries/regions not listed above
<Note> You should unplug and reconnect the power cord, and then
Philippines.
English- 12
restart the machine for DIP switch setting to take effect. Once C-VIDEO
is enabled, VGA OUT is not supported.
<Note> Only the live image can be displayed in C-Video output mode.
4.11 Installing application software
The application software installed on the computer enables you to:
Control the DVP510B
Capture and record images.
Annotate the image, highlight important details and save it.
Support the full screen function.
<Note> Please refer to Podium View™ software user manual for
installation steps and software operation.
English- 13
Chapter 5 Start Using
<Note>: Please adjust it to be suitable for the local voltage frequency of
50/60 Hz. For the frequency in actual use, please refer to the manual
(Appendix 1).
1. Pull up the camera and the camera arm. The camera should aim at the
center of the presenter.
2. Pull up the lamp arm to a proper position.
3. Place an object to be displayed under the camera.
4. Press [POWER] on the remote control or control panel to power
on.
5. Press control panel [AUTO TUNE] button to optimize the image.
You are ready to present.
6. Each time the camera head is moved, press [AUTO TUNE] on the
remote control or control panel to refocus the lens.
<Note>: According to your request, you can adjust the camera head
slightly to aim at the center of the documents when the anchor of lens
was reached.
English- 14
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.