Dukane 8947 User Manual
DLP Projector
Model 8947
USER’S MANUAL
401-8947-00
Copyright
This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
© Copyright January, 2006
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pending applications in other countries throughout the world.
All other product names used in this manual are the properties of their respective owners and are acknowledged.
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
M
a
n
u
a
l
D
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
L
P
P
r
o
j
e
c
t
o
r
—
U
M
s
e
r
’
s
M
a
n
u
a
l
a
n
u
a
l
Important Safety Information
Congratulations on purchasing the DLP projector!
Important:
It is strongly recommended that you read this section carefully before using the projector. These
safety and usage instructions will ensure that you enjoy many years of safe use of the projector.
Keep this manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause personal injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
Remote Control
Some remote controls have a laser for pointing out items on a screen.
DANGER: Do not point the laser in the eyes. Doing so can damage the eyes permanently.
General Safety Information
¾ Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in
the unit. For servicing, contact qualified service personnel.
¾ Follow all warnings and cautions in this manual and on the unit case.
¾ The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the lamp is on.
¾ Do not place the unit on an unstable surface, cart, or stand.
¾ Avoid using the system near water, in direct sunlight, or near a heating device.
¾ Do not place heavy objects such as books or bags on the unit.
— ii —
P
r
P
r
P
r
Power Safety
¾ Only use the supplied power cord.
¾ Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
¾ Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. Refer to “Replacing the Projection Lamp” on
page 38 for clear and safe instructions for this procedure. Before replacing the lamp:
¾ Unplug the power cord.
¾ Allow the lamp to cool for about one hour.
Spent Lamp Management
¾ This product contains a metal halide lamp, which contains mercury. Dispose of it as required by lo-
cal ordinances and regulations.
¾ The USA restricts or prohibits the disposal of some or all mercury containing lamps in the municipal
waste stream. Please visit
quirements and recycling facilities.
www.lamprecycle.org for more information on specific state disposal re-
e
f
a
c
e
e
f
a
c
e
e
f
a
c
e
¾ The following states have laws that deal with information that wholesalers must provide to contrac-
tors for lamp disposal.
Connecticut
Maine
Minnesota
Rhode Island
¾ For users in Connecticut, please call our toll free number1-888-657-5267 to place an order for the
delivery of a kit for returning a used lamp. The kit includes a box for the lamp, tape, and a return
shipping label. To return a lamp:
1. Place the lamp in the box, complete the enclosed form, and seal the box with the provided tape.
2. Affix the return shipping label to the box and call 1.800.463.3339 FedEx Ground Service
for box pickup.
Cleaning the Projector
¾ Unplug the power cord before cleaning. Refer to “Cleaning the Projector” on page 41.
¾ Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the “Regulatory Compliance” section on page 54.
– iii –
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
M
a
n
u
a
l
D
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
L
P
P
r
o
j
e
c
t
o
r
—
U
M
s
e
r
’
s
M
a
n
u
a
l
a
n
u
a
l
Main Features
• Lightweight unit, easy to pack away and transport
• Compatible with all major video standards including NTSC, PAL, and SECAM
• A high brightness rating allows for presentations in daylight or in lit rooms
• Supports resolutions up to UXGA at 16.7 million colors to deliver crisp, clear images
• Flexible setup allows for front, rear, and ceiling projections
• Line-of-vision projections remain square, with advanced keystone correction for angled
projections
• Input source automatically detected
About this manual
This manual is intended for end users and describes how to install and operate the DLP projector. Wherever possible, relevant information—such as an illustration and its description—has been kept on one
page. This printer-friendly format is both for your convenience and to help save paper, thereby protecting
the environment. It is suggested that you only print sections that are relevant to your needs.
— iv —
P
r
e
f
a
c
P
P
e
r
e
f
a
c
r
e
f
a
c
Table of contents
GETTING STARTED.......................................................................................................................................................... 1
PACKING CHECKLIST........................................................................................................................................................... 1
VIEWS OF PROJECTOR PARTS............................................................................................................................................... 2
Front-right View ............................................................................................................................................................. 2
Top View—On-screen Display (OSD) Buttons and LEDs .............................................................................................. 3
Side View Connectors..................................................................................................................................................... 4
Projector LED Descriptions........................................................................................................................................... 5
Rear View........................................................................................................................................................................ 6
Bottom View.................................................................................................................................................................... 7
REMOTE CONTROL PARTS ................................................................................................................................................... 8
REMOTE CONTROL OPERATING RANGE............................................................................................................................. 10
PROJECTOR AND REMOTE CONTROL BUTTONS.................................................................................................................. 10
SETUP AND OPERATION...............................................................................................................................................11
INSERTING THE REMOTE CONTROL BATTERIES ................................................................................................................. 11
CONNECTING INPUT DEVICES ............................................................................................................................................ 12
STARTING AND SHUTTING DOWN THE PROJECTOR............................................................................................................. 14
ADJUSTING THE PROJECTOR LEVEL................................................................................................................................... 16
ADJUSTING THE ZOOM, FOCUS AND KEYSTONE ................................................................................................................ 17
ADJUSTING THE VOLUME .................................................................................................................................................. 18
e
e
ON-SCREEN DISPLAY (OSD) MENU SETTINGS....................................................................................................... 19
OSD MENU CONTROLS ..................................................................................................................................................... 19
Navigating the OSD ...................................................................................................................................................... 19
SETTING THE OSD LANGUAGE.......................................................................................................................................... 20
PICTURE MENU..................................................................................................................................................................21
Picture Menu Functions Available for Connected Source............................................................................................22
ADVANCE MENU ............................................................................................................................................................... 24
Advance Menu Functions Available for Connected Source..........................................................................................25
SETUP MENU ..................................................................................................................................................................... 27
Setup Menu Functions Available for Connected Source............................................................................................... 29
AUDIO MENU..................................................................................................................................................................... 31
Audio Menu Functions Available fo r Connected Source..............................................................................................31
WINDOW MENU................................................................................................................................................................. 32
COLORMGR MENU ............................................................................................................................................................ 34
SERVICE MENU..................................................................................................................................................................35
NETWORK MENU............................................................................................................................................................... 37
MAINTENANCE AND SECURITY................................................................................................................................. 38
REPLACING THE PROJECTION LAMP................................................................................................................................... 38
Resetting the Lamp........................................................................................................................................................40
CLEANING THE PROJECTOR................................................................................................................................................41
Cleaning the Lens ......................................................................................................................................................... 41
Cleaning the Case......................................................................................................................................................... 41
USING THE KENSINGTON® LOCK ......................................................................................................................................41
TROUBLESHOOTING..................................................................................................................................................... 43
COMMON PROBLEMS AND SOLUTIONS ............................................................................................................................... 43
TIPS FOR TROUBLESHOOTING............................................................................................................................................ 43
LED ERROR MESSAGES..................................................................................................................................................... 44
IMAGE PROBLEMS.............................................................................................................................................................. 44
LAMP PROBLEMS............................................................................................................................................................... 45
REMOTE CONTROL PROBLEMS .......................................................................................................................................... 45
AUDIO PROBLEMS ............................................................................................................................................................. 45
HAVING THE PROJECTOR SERVICED .................................................................................................................................. 46
SPECIFICATIONS.............................................................................................................................................................47
SPECIFICATIONS................................................................................................................................................................. 47
– v –
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
M
a
n
u
a
l
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
D
L
P
P
r
o
j
e
c
t
o
r
—
U
Input Connectors........................................................................................................................................................... 48
Output Connectors........................................................................................................................................................48
Control Connectors.......................................................................................................................................................48
PROJECTION DISTANCE V.S. PROJECTION SIZE (FOR STANDARD LENS).............................................................................49
TIMING MODE TABLE........................................................................................................................................................ 50
PROJECTOR DIMENSIONS ................................................................................................................................................... 53
REGULATORY COMPLIANCE..................................................................................................................................... 54
FCC WARNING.................................................................................................................................................................. 54
CANADA ............................................................................................................................................................................ 54
SAFETY CERTIFICATIONS................................................................................................................................................... 54
EN 55022 WARNING ......................................................................................................................................................... 54
M
s
e
r
’
s
M
a
n
u
a
l
a
n
u
a
l
— vi —
G
Packing Checklist
Carefully unpack the projector and check that the following items are included:
ETTING STARTED
PROJECTOR WITH LENS CAP REMOTE CONTROL
DLP
(WITH TWO AAA BATTERIES)
POWER CORD COMPUTER CABLE
(DVI-DB15)
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work.
Caution:
Avoid using the projector in dusty environments.
CD-ROM (THIS USER’S MANUAL ) QUICK START GUIDE
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
M
a
D
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
L
P
P
r
o
j
e
c
t
o
r
—
U
r
s
e
r
n
’
s
M
a
n
’
s
M
a
n
Views of Projector Parts
Front-right View
u
a
l
u
a
l
u
a
l
1
32
4
7 5 65
ITEM LABEL DESCRIPTION SEE PAGE:
1.
2.
See “Top View—On-screen Display (OSD) Buttons and LEDs” on page 3.
Focus Focuses the projected image
17
3.
4.
5.
6.
7.
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp
cool. Do not obstruct any of the ventilation openings.
Lens zoom Enlarges the projected image
See “Side View Connectors” on page 4.
Height-adjusters Turn to adjust level of projector
Lens Remove lens cap before use
Front IR receiver Receiver for IR signal from remote control
16
14
10
– 2 –
D
L
D
D
Top View—On-screen Display (OSD) Buttons and LEDs
12345
P
P
r
o
j
e
c
t
o
r
–
U
s
e
r
’
s
M
a
n
u
a
l
L
P
P
r
o
j
e
c
t
o
r
–
U
s
e
r
’
s
L
P
P
r
o
j
e
c
t
o
r
–
U
M
s
e
r
’
s
M
a
n
u
a
l
a
n
u
a
l
Power
on/off
Auto
Source
Data
Source
Video
6
7
U
ser
Mode
Temp
Lamp 1
Lamp 2
15 14 13 12 11 10
ITEM LABEL DESCRIPTION SEE PAGE:
1.
2.
Power of/off Turns the projector on or off
Auto Optimizes image size, position, and resolution
8
Power
9
14
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Menu Opens and exits the OSD
Source Data Detects the data (PC) input device
Source Video Detects the video input device
Volume Adjust the volume with LEFT/RIGHT arrow buttons
User Mode Open the User mode menu
Power
Temp
See “Projector LED Descriptions” on page 5.
Lamp 1
Lamp 2
Enter Confirm settings in OSD menus
Lens Shift Adjust the vertical shift of the lens
Arrow buttons Navigate and changes settings in the OSD
Volume/keystone adjust when OSD off
19
14
15.
Keystone Adjust the keystone with UP/DOWN arrow buttons
– 3 –
D
L
P
P
r
o
j
e
c
t
o
r
—
D
D
L
P
P
r
o
j
e
L
P
c
P
r
o
j
e
c
U
t
o
r
—
U
t
o
r
—
U
Side View Connectors
s
e
r
’
s
M
a
n
u
a
l
s
e
r
’
s
M
s
e
r
’
s
M
a
n
u
a
l
a
n
u
a
l
123 4 5
6
13
7
12
11
10
8
9
ITEM LABEL DESCRIPTION SEE PAGE:
1.
2.
3.
4.
Input Video 1 Connect an HDMI cable from an HDTV
LAN Control Connect a LAN cable for controlling projector through a PC
Wired Remote Connect a wired remote control
USB Mouse Connect the USB cable from a computer
5.
6.
7.
8.
9.
10.
RS232 This is a service port for firmware upgrades.
Input Data 1 Connect a DVI-D computer cable from a computer
Audio-Out Connect an audio cable to external speakers
RGB-Out Connect an RGB cable to an external monitor
Input Video 3 Connect an S-video cable to the S-video connector
Connect an RCA audio connector to L/R audio connectors
Power Connect the supplied power cord
Input Video 4 Connect an RCA component cable the Y/Pb/Pr connectors
Connect an RCA audio connector to L/R audio connectors
– 4 –
12
14
12
D
L
P
P
r
o
j
e
c
t
o
r
–
U
s
e
r
’
s
M
a
n
D
D
L
P
P
r
o
j
e
c
t
o
r
–
U
s
e
r
’
L
P
P
r
o
j
e
c
t
o
r
–
U
s
s
e
r
’
u
M
a
n
s
u
M
a
n
u
ITEM LABEL DESCRIPTION SEE PAGE:
a
l
a
l
a
l
11.
12.
13.
Input Video 2 Connect a composite video cable to the Video connector
Connect an RCA audio connector to L/R audio connectors
Input Data 3 Connect a 5-connector BNC (RGB + VSync + HSync) cable
Input Data 2 Connect an RGB cable from a computer to RGB-In
Connect an audio cable from a computer to Audio-In
Projector LED Descriptions
LED ON (SEE PAGE 14) OFF (SEE PAGE 14) FLASHING (SEE PAGE 44)
Power System ready Power off System error
Temp Standby Lamp on Over temperature
Lamp 1 Standby/lamp off Lamp on Lamp error
Lamp 2 Standby/lamp off Lamp on Lamp error
12
– 5 –
D
L
P
P
D
L
P
P
D
L
P
P
Rear View
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
M
a
n
u
a
l
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
r
o
j
e
c
t
o
r
—
U
M
s
e
r
’
s
M
a
n
u
a
l
a
n
u
a
l
1
2
3
ITEM LABEL DESCRIPTION SEE PAGE:
1.
2.
3.
Cover screw Loosen to remove lamp cover
Rear IR receiver Receiver for IR signal from remote control
Security Lock Secure to permanent object with a Kensington® Lock
system
38
10
41
– 6 –
Bottom View
D
D
D
L
P
P
r
o
j
e
c
t
o
r
–
U
s
e
r
’
s
M
a
n
u
a
l
L
P
P
r
o
j
e
c
t
o
r
–
U
s
e
r
’
s
L
P
P
r
o
j
e
c
t
o
r
–
U
M
s
e
r
’
s
M
a
n
u
a
l
a
n
u
a
l
2
332
1
3
ITEM LABEL DESCRIPTION SEE PAGE:
1.
2.
3.
Caution:
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 6 mm (1/4 inch). To allow for proper ventilation, keep a distance of 50 cm (20 inches) from
walls and ceiling. For permanent installations, follow local codes.
Carry handle Unfold to carry projector
Height adjusters Adjust level of projector
Ceiling support
holes
Contact your dealer for information on mounting the projector on a ceiling.
– 7 –
—
16
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
D
D
L
P
P
r
o
j
e
c
t
o
r
—
L
P
P
r
o
j
e
c
U
t
o
r
—
U
M
s
e
r
’
s
M
s
e
r
’
s
M
Remote Control Parts
a
n
u
a
l
a
n
u
a
l
a
n
u
a
l
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluo-
rescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path between remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on
the remote control. This user’s manual describes the functions based on the remote control.
– 8 –
D
L
P
P
r
o
j
e
c
t
o
r
–
U
s
e
r
’
s
M
a
n
D
D
L
P
P
r
o
j
e
c
t
o
r
–
U
s
e
r
’
L
P
P
r
o
j
e
c
t
o
r
–
U
s
s
e
r
’
u
M
a
n
s
u
M
a
n
u
ITEM LABEL DESCRIPTION SEE PAGE:
a
l
a
l
a
l
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Power Lamp On/Off switch
Lens Shift Lens Shift
Auto Auto sync
Focus+ Motorized focus +
Zoom+ Motorized zoom +
D.Zoom+ Digital Zoom +
Focus- Motorized focus -
Zoom- Motorized zoom -
D.Zoom- Digital Zoom -
Keystone Keystone correction
Menu Menu On/Off switch
Laser Trigger Laser pointer trigger, press to emit laser
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Up / PageUp OSD selection (up), USB up arrow key when button 17 LED is on.
Left/Volume- Decrement value, select menu sub item
Right/Volume+ Increment value, select menu sub item
Down/PageDown OSD selection (down), USB down arrow key when button 17 LED is on.
PD/PU Shift Enable/Disable USB PD/PU function
Enter Enter key
Mouse right click IR mouse left click
Source Data To select source (RGB, DVI, RGBHV, Wireless)
Exit Exit OSD (when in main menu), go to previous menu (when in child menu)
Source Video To select video (video, S-Video, Component, HDMI)
Break Time Use to setup break time
Freeze Freeze image
25.
26.
Blank Blank display
User Mode To select different user picture mode
– 9 –
D
D
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
M
a
n
u
a
l
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
L
P
P
r
o
j
e
c
t
o
r
—
U
M
s
e
r
’
s
M
a
n
u
a
l
a
n
u
a
l
27.
28.
29.
30.
31.
32.
Note:
The remote control can only interface with a computer when connected to the computer through a
USB cable connection. The computer cable connects a computer to the projector for display purposes only.
Lamp Lamp settings
Status Show the service menu
Mute Audio mute
Pan Digital pan
16:9 Aspect Ratio
Slide (PC/Projector) Swap IR function for PC or Projector
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 10 meters (33 feet) and
30 degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however the buttons on the projector are limited in use. The following illustration shows the corresponding buttons on the remote control and on
the projector.
Some buttons on the projector have two functions. For example, item 4/6 on the projector functions
both as the source button and as the left cursor key in OSD menus.
– 10 –
Inserting the Remote Control Batteries
S
ETUP AND OPERATION
Remove the battery compartment cover
1.
by sliding the cover in the direction of
the arrow.
Insert the supplied batteries taking note
2.
of the polarity (+/-) as shown here.
Replace the cover.
3.
Caution:
1. Only use AAA alkaline batteries.
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the batteries when not using the projector for prolonged periods.
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
M
a
n
u
a
l
D
D
L
P
P
r
o
j
e
c
t
o
r
—
U
s
e
r
’
s
L
P
P
r
o
j
e
c
t
o
r
—
U
M
s
e
r
’
s
M
a
n
u
a
l
a
n
u
a
l
Connecting Input Devices
A PC or notebook computer as well as video devices can be connected to the projector at the same
time. Video devices include DVD, VCD, and VHS players, as well as movie camcorders and digital
still cameras. Check the user manual of the connecting device to confirm it has the appropriate output
connector.
123 4 5
6
13
12
11
10
ITEM LABEL DESCRIPTION
1.
2.
3.
4.
Input Video 1 Connect an HDMI cable from an HDTV
LAN Control Connect a LAN cable for controlling projector through a PC
Wired Remote Connect a wired remote control
USB Mouse Connect the USB cable from a computer
7
8
9
5.
6.
7.
8.
9.
RS232 This is a service port for firmware upgrades.
Input Data 1 Connect the supplied DVI-DB15 compu ter cable from a computer
Audio-Out Connect an audio cable to external speakers
RGB-Out Connect an RGB cable to an external monitor
Input Video 3 Connect an S-video cable to the S-video connector
Connect an RCA audio connector to L/R audio connectors
Power Connect the supplied power cord
– 12 –
Loading...