Dual SG4, SG3 User Manual

SG3/SG4

INSTALLATION/OWNER'S MANUAL

Universal Marine Splash Guard

SG3/SG4 INSTALLATION

Preparation

Protect your marine head unit from damage and the harsh marine environment with the
SG3/SG4 splash guard. This marine grade cover fits most single DIN size head units and
will protect against splashes and debris.

Before You Start

• Disconnect negative battery terminal. Consult a qualified marine technician or service

manual for instructions.

• Due to differences in head units, it is recommended to temporarily mount head unit in

splash guard before installation to ensure splashguard cover will close properly.

• Use extreme caution when drilling holes to avoid damaging fuel lines or existing wiring. 

Cutout Dimensions

Opening and Closing the Splash Guard

• Press the release button on top to open the cover and access the head unit.

• To close, fold the cover up and press until it clicks into place.

Release Button

2