40” WIDESCREEN LED TV
MODEL NO.: DL-TQL40F4-001
USER MANUAL
Please read this manual carefully before using,
and keep it for future reference.
1
SAFETY INSTRUCTIONS
De bliksemschicht met
pijl in de driehoek is een
waarschuwingsteken
dat u attent maakt op
“gevaarlijke spanning”
binnenin het product.
VOORZICHTIG: OM HET RISICO OP
EEN ELEKTRISCHE SCHOK TE
VERMINDEREN DIENT U HET
DEKSEL (OF DE ACHTERKANT)
NIET TE VERWIJDEREN. ER
BEVINDEN ZICH BINNENIN GEEN
DOOR DE GEBUIKER TE
REPAREREN ONDERDELEN. LAAT
DE SERVICE OVER AAN BEVOEGD
PERSONEEL.
The exclamation
point within the
triangle is a warning
sign alerting you of
important
instructions
accompanying the
product.
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
SERIOUS PERSONAL INJURY:
●
If the cord is damaged, have it repaired by the manufacturer, its service or a similarly
qualified person in order to avoid any hazard.
●
The cord should always be readily accessible.
●
The apparatus shall not be exposed to dripping or splashing of water or liquids and that
no objects filled with liquids such as flowers vases shall be placed on the product.
●
The normal ventilation of the product shall not be impended for intended use.
●
Always leave a minimum distance of 10 cm around the unit to ensure sufficient
ventilation.
●
Naked flame sources, such as candles, should not be placed on top of the device.
●
The device is intended for use only in a temperate climate.
●
Situate this product away from heat sources such as radiators, heat registers, stoves, or
other appliances (including amplifiers) that produce heat.
●
Clean the product only as recommended by the manufacturer (see “Maintenance”
section for details). Unplug the power plug from the wall outlet before cleaning,
●
Unplug the power plug from the wall outlet when left unused for an extended period.
●
Prevent objects/liquids from falling or spilled on the product.
●
Operate the product only with the supplied power cord. Route power cords so they are
not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to plugs, convenience receptacles, and the point where they exit from
the product.
●
Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
IMPORTANT INSTRUCTIONS
2
●
Do not operate this product under the following conditions.
- When the power-supply cord or plug is damaged.
- If liquid has been spilled into or objects have fallen into the product.
- If the product has been exposed to rain or water.
- If the product does not operate when used according to the operating instructions.
- If the product has been dropped or damaged in any way.
●
Do not attempt to service the product; take it to the electronics repair shop of your choice
for any servicing or repair.
●
Do not overload wall outlets, extension cords, or integral convenience receptacles.
●
Connect this product to the power outlet which has protective earth connection.
CAUTION- TO REDUCE THE RISK OR PERSONAL INJURY OR
PRODUCT/PROPERTY DAMAGE:
●
This product is intended solely for non-commercial, non-industrial, personal use as a
television. Do not use this product for any other purpose.
●
Do not subject the product to violent shocks, extreme temperatures, or lengthy periods of
direct sunlight.
●
Keep the product away from magnetic objects, motors, and transformers.
●
Do not use outdoors in inclement weather.
●
Do not use the TV while driving; this is dangerous and is illegal in some areas.
BATTERY HANDLING AND USAGE:
●
CAUTION: Danger of explosion if battery is incorrectly replaced or not replaced by the
same type or equivalent.
●
The battery should not be exposed to excessive heat such as sunshine, fire or similar.
●
Different types of batteries, new and used batteries should not be mixed.
●
The battery must be installed according to the polarity.
●
If the battery is worn, it must be removed from the product.
●
The battery must be disposed of safely. Always use the collection bins provided (check
with your dealer) to protect the environment.
●
Keep batteries away from children and pets. Only adults should handle batteries.
●
Never throw batteries into a fire or expose them to fire or other heat sources.
●
Follow the battery safety and usage instructions.
3
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that
when you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the
correct disposal of their old appliance.
DUAL ELECTRONICS – 79/81 ANCIENNE RN7 – 69570 DARDILLY
User Manual……………………………………………………………………………………1
Remote Control……………………………….………………………………………………1
All the pictures in this manual are just for your reference, appearance and display
should subject to the final product.
At full volume, prolonged listening to the portable
audio device may damage the user’s hearing.
ACCESSORIES
4
TABLE OF CONTENTS
GETTING STARTED
IMPORTANT INSTRUCTIONS...................................................................................1-3
ACCESSORIES……….......................................................................................................3
FEATURES....................................................................................................................5
GENERAL PARTS..............................................................................................................6-7
REMOTE CONTROL.....................................................................................................8-9
REMOTE CONTROL PREPARATION.................................................................................10
BASIC CONNECTION....................................................................................................11-15
OPERATIONS
BASIC OPERATIONS.............................................................................................16-24
MAIN MENU...........................................................................................................25-42
FIRST TIME INSTALLATION……..………………….……………………………………25-26
DTV MODE.................................................................................................................27-41
ATV AND OTHER MODES..............................................................................................41
PC MODE...................................................................................................................41-42
FOR REFERENCE
MAINTENANCE..................................................................................................................43
WALL MOUNTING…………………………………………………………………………..........43
STAND INSTALLATION…………………………………………………………………………..44
SPECIFICATIONS...............................................................................................................45
TROUBLESHOOTING.........................................................................................................46
5
40" LED Display
This unit has a built-in 40” LED display window to provide clear vision and low
radiation.
With Hotel Lock
Support Auto TV Scanning
Support Digital Broadcasting Reception
Support TV Guide Function
Support TELETEXT (Europe) Function
Support USB Multimedia Playback
Support Multi-languages On Screen Display
Support Full Function Remote Control
Support HDMI, SCART, YPBPR, AV, VGA, PC AUDIO and CI Input
Support EARPHONE and COAXIAL Output
Support PVR Function
Support TIME SHIFT Function
With Detachable Stand Holder
With External Antenna Jack
With Built-in Speakers
FEATURES
6
MAIN UNIT
1. LED display screen
2. Remote control sensor / Power indicator- In standby mode the indicator light will display red
color; when switching on the unit the indicator light will display blue color.
3. Stand holder
4. VOL +/- button- To increase/decrease the volume level or move left/right.
5. CH +/- button- To select next/previous channel or move up/down.
6. MENU button- To enter menu setting page.
7. SOURCE button- To select the input source.
8. POWER button- To turn ON/OFF the TV.
GENERAL PARTS
Front View
7
1. Power input
2. HDMI1/HDMI2/HDMI3 input terminal
3. VGA input terminal
4. PC AUDIO input terminal
5. SCART input terminal
6. EARPHONE output terminal
7. CI input terminal
8. Mini AV input terminal
9. Mini YPbPr input terminal
10. COAXIAL output terminal
11. USB input terminal
12. RF input terminal- To connect the external antenna.
13. Built-in speakers
GENERAL PARTS
Back View
8
REMOTE CONTROL
1. POWER: To set the unit in standby mode; press it again to switch it on.
2. MUTE: To mute the sound.
3. AUTO: To adjust the screen automatically in
PC/VGA mode.
4. NUMBER BUTTONS (0-9): To input the
number information, such as channel number and
so on.
5. -/--: To switch the digit.
6.
: To return to previous channel.
7. ASPECT: Press this button repeatedly to select
desired aspect ratio of screen.
8. AUDIO: To select different soundtrack.
9. VOL +/-: To turn up/down the volume.
10. CH+/-: To play the next/previous channel.
11. DISPLAY: To display information of current
program.
12. ▲ : Up navigation button.
13. ◄ : Left navigation button.
14. OK: To confirm selection.
15. ►: Right navigation button.
16. ▼ : Down navigation button.
17. MENU: To display the main menu. Press it
again to return to previous menu page.
18. EXIT: To exit menu page.
19. SOURCE: To switch the input source.
20. P-MODE: To switch the picture mode.
21. SLEEP: To set the sleep time as desired.
22. S-MODE: To switch the sound mode.
23. FAV: To enter the favorite channels list page.
24. FAV-: To play previous favorite channel.
25. EPG: To display program guide information.
26. FAV+: To play next favorite channel.
27. TEXT: To display the teletext.
28. HOLD: To hold the teletext.
9
REMOTE CONTROL
29. SUBTITLE: To open the subtitle. Press it
again to close subtitle.
30. TV/RADIO: To switch the unit between TV
and radio.
31. INDEX U: To enter index page.
32. SIZE: To switch teletext size.
33. SUBPAGE: To enter the subpage of teletext.
34. REVEAL: To hide teletext, or display hidden
characters.
35. MEDIA: To enter MEDIA mode directly.
36.
: To play or pause playing; press this button
to start time shift in DTV mode.
37. : To move fast forward.
38.
: To move fast backward.
39. ●: To start recording.
40. █: To stop playing.
41.
: To play next chapter.
42. : To play previous chapter.
43. RED button
44. GREEN button
45. BLUE button
46. YELLOW button
10
REMOTE CONTROL PREPARATION
BATTERY INSTALLATION
Install the batteries as the following pictures. Be sure + and – terminals are positioned
as indicated in the battery compartment (Fig1).
SERVICE LIFE OF BATTERIES
- The batteries normally last for one year although this depends on how often the
remote control is used.
- If the remote control fails to work even when it is operated near the player, replace the
batteries.
- Use two size AAA dry batteries.
NOTE:
● Do not drop, step on or otherwise impact the remote control. This may damage the
parts or lead to malfunction.
● If the remote control is not going to be used for a long time, remove the batteries.
REMOTE CONTROL
OPERATION
Point the remote control from no more
than about 6m from the remote control
sensor and within about 60°of the
front of the player (Fig2).
NOTES:
- The operating distance may vary
according to the brightness of the
room.
- Do not point bright light at remote
control sensor.
- Do not place objects between the
remote control and the remote control
sensor.
- Do not use this remote control while
simultaneously operating the remote
control of any other equipments.
Fig1 Fig2
Remote Control
Sensor
Push
Open
Press
11
● Ensure all the cables are disconnected from the main unit before connecting to AC
power source.
● Read through the instructions before connecting other equipments.
CONNECTING TO AC POWER SOURCE
CONNECT EXTERNAL ANTENNA TO UNIT
Install external antenna into antenna jack for best picture.
BASIC CONNECTION
Main unit
Antenna
Outdoor
antenna
amplifier
Indoor
antenna
amplifier
Power plug
of antenna
amplifier
75 OHM
antenna
plug
To power outlet
12
HDMI CONNECTION
PC/VGA CONNECTION
HDMI cable
(Not included)
Use HDMI cable to connect the unit
with other devices to receive
high-definition multimedia signal.
Back of DVD/VCR
Back of PC
Use VGA cable and Audio cable to
connect the unit with TV or PC, and use
this product as a monitor.
VGA cable
(Not included)
Audio cable
(Not included)
13
SCART CONNECTION
COAXIAL CONNECTION
Back of DVD/VCR
SCART cable
(Not included)
Use coaxial cable to connect the unit with amplifier or other
audio decoding devices for coaxial audio signal output.
(Coaxial cable is not included.)
14
AV (COMPOSITE VIDEO) CONNECTION
YPBPR CONNECTION
YPbPr cable
(Not included)
Back of DVD/VCR
Back of DVD/VCR
For basic connection, use the
composite Audio L/R (white/red) and
CVBS (yellow) cable to connect the unit
with other devices.
AUDIO cable
(Not included)
AV cable
(Not included)
15
USB CONNECTION (TV)
Insert a USB memory device into USB slot for multimedia files playback and recording
digital programs.
INSERT A CI CARD
EARPHONE CONNECTION
CI slot
(CI card is not included)
(Not included)
EARPHONE cable
(Not included)
16
MAKE SURE ALL THE EQUIPMENTS AND POWER CORD ARE
CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE
BEFORE KINDS OF OPERATIONS.
- Press POWER button on the unit or remote control to power ON the unit
(indicator will glow blue); press it again to power OFF (standby mode) the unit
(indicator will glow red).
- Press SOURCE button on the unit or remote control to switch the unit to DTV or
ATV mode.
SELECT DESIRED PROGRAM
1. Press CH+ button to play next channel.
2. Press CH- button to play previous channel.
3. Press number buttons on remote control directly to select desired program.
NOTE: Press -/-- button repeatedly to switch the digit.
VOLUME CONTROL
- Press VOL+ or VOL- to adjust the level of current volume.
Available range: 0-100.
MUTE CONTROL
- Press MUTE button to mute the sound, press it again to turn on the sound.
SOURCE SETTING
- Press SOURCE button on the unit or remote control to display the sources list.
- Press UP or DOWN navigation button to select desired input source, and then press OK
button to confirm selection.
Available options: DTV, ATV, AV, SCART, YPBPR, HDMI1/HDMI2/HDMI3, PC, Media.
PICTURE MODE
- Press P-MODE button on remote control repeatedly to select desired PICTURE mode
directly.
Available options: Standard, Mild, User, Dynamic.
SOUND MODE
- Press S-MODE button on remote control repeatedly to select SOUND mode directly.
Available options: Standard, Movie, Music, Speech, User.
BASIC OPERATIONS
17
SLEEP TIME SETTING
- Press SLEEP button on remote control repeatedly to select SLEEP TIME directly.
Available options: Off, 10 Mins, 20 Mins, 30 Mins, 60 Mins, 90 Mins, 120 Mins, 180 Mins, 240
Mins.
VIDEO SIZE SETTING
- Press ASPECT button on remote control repeatedly to select VIDEO SIZE directly.
Available options: Auto, 4:3, 16:9, Zoom1, Zoom2.
NOTE: If there’s no signal, pressing ASPECT button will not work. And the available video
size may be different for different input source.
MULTI-AUDIO SETTING
- Press AUDIO button on remote control to enter Multi-Audio
menu page.
- Press LEFT/RIGHT navigation button to select the available
soundtrack.
- Press UP/DOWN navigation button to select the available
audio language.
NOTE: To enable this function, make sure that the channel
you are viewing supports multi-audio languages.
INFORMATION DISPLAY
- Press DISPLAY button on remote control to display information of current program.
TV GUIDE (FOR DTV MODE ONLY)
- Press EPG button on remote control to enter below menu page.
18
- Press UP/DOWN navigation button to select preferred channel.
- Press LEFT/RIGHT navigation button to switch between left column and right column.
- Press RED button to switch between weekly mode and daily mode.
- Press YELLOW button to display the TV guide of previous day.
- Press BLUE button to display the TV guide of next day.
FAVORITE LIST
When viewing an available channel, press FAV button on
remote control to enter Favorite List menu page.
- Press UP or DOWN navigation button to select preferred
channel.
- Press LEFT/RIGHT navigation button to select preferred
favorite group.
- Press OK button to confirm selection.
NOTES:
- To add/remove a channel from Favorite List, please see Part
3.2 “Favorite Management”.
- Press RED button on remote control to display the keyboard. Then you can rename a
desired favorite type using navigation buttons.
QUICK SELECT
When viewing an available channel, press OK button on remote
control to enter Channel List menu page.
- Press UP or DOWN navigation button to select preferred
channel.
- Press OK button to confirm selection.
TELETEXT
- Press TEXT button on remote control to display the available
teletext information and press it again to stop playing the teletext.
TV/RADIO (FOR DTV MODE ONLY)
- Press TV/RADIO button on remote control to switch the unit between TV and radio mode.
SUBTITLE
- Press SUBTITLE button on remote control to enter Subtitle
menu page.
- Press LEFT/RIGHT navigation button to select preferred option.
- Press UP/DOWN navigation button to select available subtitle.
- Press OK button to confirm selection.
NOTE: To enable this function, make sure that the channel you
are viewing supports multi-subtitle.
19
RECORDER (FOR DTV MODE ONLY)
- Insert your USB memory device into USB slot first.
When watching a digital program:
- Press ● button on remote control to start recording directly and press it again to call out
below menu.
- Use LEFT/RIGHT navigation button to move the cursor; use number buttons to input your
desired value and press OK button to confirm your setting.
- Press
button on remote control to call out a dialog box, and select OK to stop recording;
select Cancel to dismiss the dialog box.
To watch recorded programs:
- Press INDEX button on remote control to call out the Record List menu.
- Press UP/DOWN navigation button to select recorded files and press OK button to start
playback.
TIME SHIFT (FOR DTV MODE ONLY)
- Insert your USB memory device into USB slot first.
When watching a digital program:
-If you don’t want to miss any programs when left, press
button on remote control to call
out a dialog box, and select OK to enter TIME SHIFT mode; select Cancel to dismiss the
dialog box. Press button again to enable TIME SHIFT function.
- Press
button again when you’re back to watch the program in TIME SHIFT mode.
- To stop TIME SHIFT, press on remote control to stop TIME SHIFT playing and press it
again to call out a dialog box. Select OK to exit TIME SHIFT mode and select Cancel to
dismiss the dialog box.
20
MEDIA PLAYBACK
- Press SOURCE button on the unit or remote control to set the unit in MEDIA mode.
- Insert a USB memory device into USB slot before following operations.
- Press UP/DOWN/LEFT/RIGHT navigation button to move the cursor.
- Press EXIT button to return to previous menu page.
NOTE: Press MEDIA button on remote control to enter MEDIA mode directly.
1. Photo
- Press LEFT/RIGHT navigation button to select Photo in the main menu and press OK
button to enter it.
NOTE: When selecting Photo files, press EXIT button to move the cursor to TITLE and then
press RIGHT navigation button to view files in thumbnail mode.
- Use navigation buttons to select preferred file.
- Press RED button to enter a dialog box, and select Yes to delete highlighted file; select No
to cancel this operation.
- Press GREEN button to add/remove all the files from play list.
21
- Press OK button to add/remove highlighted file from play list.
- Press
button to start playing.
During photo normal playing:
- Press OK button on remote control to display the tool bar; press EXIT button to hide it.
- Press LEFT/RIGHT navigation button to select preferred option in the tool bar and press
OK button to confirm selection/enter submenu.
- Press
button on remote control to play or pause playing.
- Press button on remote control to stop playing.
- Press
button on remote control to play previous file.
- Press button on remote control to play next file.
2. Music
- Press LEFT/RIGHT navigation button to select Music in the main menu and press OK
button to enter it.
- Use navigation buttons to select preferred file.
- Press RED button to enter a dialog box, and select Yes to delete highlighted file; select No
to cancel this operation.
- Press GREEN button to add/remove all the files from play list.
- Press OK button to add/remove highlighted file from play list.
- Press
button to start playing.
22
During music normal playing:
- Press LEFT/RIGHT navigation button to select preferred option in the tool bar and press
OK button to confirm selection/enter submenu.
- Press BLUE button on remote control to close the on-screen display; press any button on
remote control to display it again.
- Press
button on remote control to play or pause playing.
- Press
button on remote control to stop playing.
- Press button on remote control to move fast backward.
- Press button on remote control to move fast forward.
- Press
button on remote control to play previous file.
- Press button on remote control to play next file.
3. Movie
- Press LEFT/RIGHT navigation button to select Movie in the main menu and press OK
button to enter it.
23
- Use navigation buttons to select preferred file.
- Press RED button to enter a dialog box, and select Yes to delete highlighted file; select No
to cancel this operation.
- Press GREEN button to add/remove all the files from play list.
- Press OK button to add/remove highlighted file from play list.
- Press
button to start playing.
During movie normal playing:
- Press OK button on remote control to display the tool bar; press EXIT button to hide it.
- Press LEFT/RIGHT navigation button to select preferred option in the tool bar and press
OK button to confirm selection/enter submenu.
- Press
button on remote control to play or pause playing.
- Press button on remote control to stop playing.
- Press button on remote control to move fast backward.
- Press
button on remote control to move fast forward.
- Press button on remote control to play previous file.
- Press button on remote control to play next file.
4. e-Book
- Press LEFT/RIGHT navigation button to select e-Book in the main menu and press OK
button to enter it.
24
- Use navigation buttons to select preferred file.
- Press RED button to enter a dialog box, and select Yes to delete highlighted file; select No
to cancel this operation.
- Press GREEN button to add/remove all the files from play list.
- Press OK button to add/remove highlighted file from play list.
- Press
button to start playing.
During e-book normal playing:
- Press RED button on remote control to add/remove current page from Bookmark List.
- Press GREEN button on remote control to enter GOTO mode. Input valid number and
press OK button to enter desired page directly.
- Press YELLOW button on remote control to display the Bookmark list.
- Press BLUE button on remote control to display the play list.
- Press
button on remote control to play previous page.
- Press button on remote control to play next page.
NOTE: To play your multimedia files, make sure you have selected correct icon in the main
menu of MEDIA PLAYBACK. That is to say, you can only play Photo files in PHOTO item,
Music files in MUSIC item and so on.
25
● The unit contains different setting menus. Once the initial programming is entered, it will
be remained in the memory until change, and the unit can always be operated under the
same conditions.
● The settings will be remained in the memory until the settings are changed, even after
setting the player to standby mode.
Common procedure for initial settings
- Press MENU button on the remote control to display the main menu.
- Press UP or DOWN navigation button to select submenus.
- Press OK or RIGHT navigation button to enter submenu page.
- Press UP or DOWN navigation button to select preferred option.
- Press LEFT or RIGHT navigation button to adjust the value.
- Press OK button to confirm selection.
- Press MENU button to return to previous menu page.
- Press EXIT button to exit menu page.
First Time Installation
- Connect to power source and turn on this TV, the first time below installation menu page
will display on the screen:
Setup 1
- Press UP/DOWN navigation button to select desired picture Mode.
- Press OK button to call out a dialog box. Select OK to confirm selection and turn to next
page; select Cancel to dismiss the dialog box.
Setup 2
- Press UP/DOWN navigation button to select the country that you are living in.
- Press OK button to confirm selection and turn to next page.
MAIN MENU
26
Setup 3
- Press UP/DOWN navigation button to select desired menu language.
- Press OK button to confirm selection and turn to next page.
Setup 4
- Press UP/DOWN navigation button to select desired auto power off time.
- Press OK button to confirm selection and turn to next page.
Setup 5
- Press UP/DOWN navigation button to select desired searching type.
- Press OK button to confirm selection and then this unit will search programs automatically.
NOTE:
- To skip ATV or DTV tuning, press MENU button on remote control to call out a dialog box,
and select OK to skip it; select Cancel to dismiss the dialog box.
- To exit tuning, press EXIT button on remote control to call out a dialog box, and select OK
to exit tuning; select Cancel to dismiss the dialog box.
27
DTV MODE
- Press SOURCE button on the unit or remote control to select DTV input source.
1. Picture
1.1 Picture Mode
Available options: Standard, Mild, User, Dynamic.
1.2 Brightness
The brightness value of picture can be adjusted from 0-100.
1.3 Contrast
The contrast value of picture can be adjusted from 0-100.
1.4 Sharpness
The sharpness value of picture can be adjusted from 0-10.
1.5 Colour
The colour saturation value of picture can be adjusted from 0-100.
NOTE: The value of Brightness, Contrast, Sharpness, and Colour is adjustable only in User
picture mode.
1.6 Tint
This item is used to adjust the tone of color in NTSC system from 0-100.
1.7 Colour Temperature
This item is used to adjust the optimum colour temperature for suitable viewing.
Available options: Standard, Cold, Warm.
28
1.8 Aspect Ratio
- Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
button to select preferred option.
Available options: Auto, 4:3, 16:9, Zoom1, Zoom2.
NOTE: If there’s no signal, pressing ASPECT button on remote control will not work. And
the available video size may be different in different input source.
1.9 Noise Reduction
This item is used to eliminate the image noise to gain better image effect.
Available options: Off, Low, Middle, High.
2. SOUND
2.1 Sound Mode
Available options: Standard, Movie, Music, Speech, User.
2.2 Bass
This item is used to adjust the level of lower-pitched sounds from 0-100.
2.3 Treble
This item is used to adjust the level of higher-pitched sounds from 0-100.
NOTE: The value of Bass and Treble is adjustable only in User sound mode.
2.4 Balance
This item is used to adjust the audio output between left and right speaker from -50 to 50.
2.5 Surround
This item is used to turn on/off Surround function.
29
2.6 AVL (Auto Volume Level)
This item is used to turn on/off AVL function.
2.7 SPDIF
This item is used to select desired SPDIF audio output type.
Available options: Off, PCM, Auto.
3. Channel
3.1 Channel Management
- Press UP/DOWN navigation button to select this item and press OK or RIGHT navigation
button to enter submenu.
- Press UP/DOWN navigation to select preferred program.
a) Press RED button on remote control and use number buttons to input the password.
Then press RED button to add/remove a delete mark on highlighted program. After that,
press OK button to enter a dialogue box. Select OK to delete it; select Cancel to cancel this
operation.
30
b) Press GREEN button on remote control and use number buttons to input the password.
Then press GREEN button to lock/unlock a program.
c) Press YELLOW button on remote control to add/remove skip mark.
d) Press BLUE button on remote control to enter MOVE mode. Then use UP/DOWN
navigation button to select preferred position and press OK button to move it.
e) Press UP/DOWN navigation to select preferred program. Then press OK button to enter
Rename menu page.
NOTE: RENAME function is available only for analog programs.
Rename operations:
- Press UP/DOWN/LEFT/RIGHT navigation button to select preferred option and press OK
button to input it.
- Press RED button on remote control to add a space.
- Press GREEN button on remote control to switch between capital letters and lower case
letters.
- Press YELLOW button on remote control to delete an input.
- Press BLUE button on remote control to save settings.
3.2 Favorite Management
31
- Press UP/DOWN navigation to select preferred program.
a) Press RED button on remote control to add highlighted channel to Favorite 1 list.
b) Press GREEN button on remote control to add highlighted channel to Favorite 2 list.
c) Press YELLOW button on remote control to add highlighted channel to Favorite 3 list.
d) Press BLUE button on remote control to add highlighted channel to Favorite 4 list.
3.3 Country
This item is used to select the country that you are living in.
3.4 Auto Search
- Press UP/DOWN navigation button to select this item and press OK or RIGHT navigation
button to enter submenu.
- Then press UP/DOWN navigation button to select All, DTV or ATV and press OK or RIGHT
navigation button to enter a dialog box. Select OK to start auto searching; select Cancel to
cancel this operation.
To exit auto tuning, press MENU or EXIT button and select OK.
3.5 DTV Manual Search
32
3.51 Channel
- Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
button to select preferred program.
3.52 Frequency (KHz)
- Press OK or RIGHT navigation button to enter submenu.
- Press LEFT/RIGHT navigation button to move the cursor; press number buttons on
remote control to input desired value.
3.53 Bandwidth (MHz)
- Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
button to select preferred bandwidth.
Once the settings of part 3.51 to part 3.53 are finished, select Start in the menu and press
OK button to start searching.
3.6 ATV Manual Search (for ATV input source only)
3.61 Current Channel
- Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
button to select preferred program.
3.62 Frequency
This item is not user adjustable.
3.63 Search
This item is used to start searching.
3.64 Fine Tune
- Press OK or RIGHT navigation button to enter submenu and press LEFT/RIGHT
navigation button to fine tune it.
33
3.65 Color System
- Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
button to select preferred color system.
Available options: Auto, PAL, SECAM.
3.66 Sound System
- Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
button to select preferred sound system.
Available options: BG, DK, I, L, L’.
NOTE: The Sound System options may vary due to different Color System settings.
3.7 LCN On/Off
This item is used to turn on/off LCN (Logic Channel Number).
4. Feature
4.1 Lock
- Press OK or RIGHT navigation button to enter submenu.
- Input the factory default password “0000” using number buttons on remote control.
NOTE: You can use the universal password “8899” if forget the factory password.
- Press UP/DOWN navigation button to select preferred item.
34
4.11 Lock Channel
This item is used to turn on/off Lock Channel function.
4.12 Parental Guidance
- Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
button to select preferred option.
Available options: Off, 4 to 18.
4.13 Change Pin Code
- Press OK or RIGHT navigation button to enter submenu.
- Input the Old Password, New Password, and Confirm New Password in turn. After that,
this unit will save the new password automatically.
35
4.14 Hotel Mode
- Press OK or RIGHT navigation button to enter submenu.
- Press UP/DOWN navigation button to select desired
item.
- Press LEFT/RIGHT navigation button to adjust the
value.
- Press OK or RIGHT navigation button to enter
submenu.
- Press MENU button to return to previous page.
Warm Tip: We strongly advise that you use Hotel
Mode in hotels and you should just ignore it if take this
TV for home use only.
Hotel Lock: Turn on/off Hotel Lock.
Channel Lock: Turn on/off Channel menu lock.
Picture Lock: Turn on/off Picture menu lock.
Sound Lock: Turn on/off Sound menu lock.
Feature Lock: Turn on/off Feature menu lock.
Setup Lock: Turn on/off Setup menu lock.
Key Lock: Turn on/off Key Lock.
Source Lock: Turn on/off the lock of all available sources.
Set Source: Select desired source.
Channel Number: Select desired channel.
Max Volume: Set the maximum volume.
Default Volume: Set the default volume.
Clear Lock: Clear above settings.
DataBase Export: Export database to other devices.
DataBase Import: Import database from other devices.
4.2 Language
- Press OK or RIGHT navigation button to enter submenu. Then select preferred OSD menu
language, subtitle language, audio language, and DTV/ATV TELETEXT language using
navigation buttons.
36
4.3 Clock
- Press OK or RIGHT navigation button to enter submenu.
- Press UP/DOWN navigation button to select preferred item.
4.31 Date
When auto searching is done, this unit will get the date from the signal and save it
automatically.
4.32 Time
When auto searching is done, this unit will get the time from the signal and save it
automatically.
4.33 Time Zone
- Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
button to select preferred option.
4.34 DST (Daylight Saving Time)
This item is used to turn on/off DST function.
4.4 Sleep Timer
This item is used to set the automatic sleep time in standby mode.
Available options: Off, 10 Mins, 20 Mins, 30 Mins, 60 Mins, 90 Mins, 120 Mins, 180 Mins, 240
Mins.
4.5 Auto Power Off
This item is used to set the Auto Power Off time.
Available options: Off, 1 Hour, 2 Hours, 4 Hours.
37
4.6 Hearing Impaired
This item is used to turn on/off Hearing Impaired function. For Hearing Impaired users, this
function can assist them to know a certain scene or action through the caption, instead of
hearing it.
NOTE: Hearing Impaired function works only when you are viewing programs that contain
related caption information.
4.7 CI Info
This item is used to display the CI information.
4.8 PVR/Timeshift
- Press OK or RIGHT navigation button to enter submenu.
- Press UP/DOWN navigation button to select preferred item.
38
4.81 Partition Select
- Press OK or RIGHT navigation button to enter submenu.
- Press RED button to enter a dialog box and then select OK to format your USB memory
device.
- Press GREEN button to set default partition.
4.82 Auto Timeshift
This item is used to turn on/off Auto Timeshift function.
4.83 Timeshift Buffer
This item is used to select desired time shift buffer duration.
Available options: Auto, 30Mins, 1hr, 2hr.
4.84 Timer
- Press OK or RIGHT navigation button to enter submenu.
39
- Press RED button on remote control to delete highlighted option.
- Press GREEN button on remote control to delete all.
- Press BLUE button on remote control to enter Edit page.
- Press YELLOW button on remote control to enter Add page.
Recorder: Turn on/off Recorder.
Type: Select your recording type: DTV, Radio.
Channel: Select a channel you want to record.
Start Time: Set the recording start time.
Duration: Set the recording duration.
Date: Set the date of recording.
Mode: Set the recording mode.
NOTE: To change the numerical display of above items, press OK button to enter it and
then use LEFT/RIGHT navigation button to move the cursor; use number buttons to input
your desired value and press OK button to confirm your setting.
4.85 Record List
- Press OK or RIGHT navigation button to enter submenu.
40
- Press UP/DOWN navigation button to select recorded files and press OK button to start
playback.
4.86 Recorder Start
This item is used to start recording when watching an available digital program.
NOTE: Before recording, insert your USB memory device into USB slot first.
5. Setup
5.1 OSD Timer
- Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
button to select preferred option.
Available options: 5/10/15/20/25/30 Seconds and Never.
5.2 Auto SCART
This item is used to turn on/off Auto SCART function. If Auto SCART is on, you can view the
programs by SCART automatically when SCART cable is connected.
5.3 PC Setup (for PC input source only)
This item is adjustable only with PC input signal.
5.4 Blue Screen
This item is used to turn on/off blue background function. The screen background will turn
blue at very weak or no signal condition, if Blue Screen is ON.
NOTE: This item is not adjustable in DTV mode.
5.5 Home Mode
This item is used to select desired picture mode.
Available options: Home, Dynamic, Standard, Mild.
41
5.6 Reset TV Setting
This item is used to reset to factory default settings.
5.7 Software Upgrade
This item is used to upgrade the TV software through USB memory device.
ATV AND OTHER MODES
- Press SOURCE button on the unit or remote control to select desired input source.
- For these modes, please refer to the menu operations of DTV mode.
PC MODE
- Connect a personal computer to this unit.
- Power on your computer and this unit.
- Press SOURCE button on the unit or remote control to select PC input source.
- Press MENU button to display the main menu. Select Setup using UP/DOWN navigation
button. Then press OK or RIGHT navigation button to enter submenu.
- Select PC Setup and enter it.
- Press UP/DOWN navigation button to select preferred item.
- Press OK or RIGHT navigation button to enter submenu. Press LEFT/RIGHT navigation
button to adjust the value.
1. Auto Adjust
This item is used to adjust the PC screen automatically.
2. H Position
This item is used to adjust the value of horizontal position (available range: -16 to 16).
42
3. V Position
This item is used to adjust the value of vertical position (available range: -16 to 16).
4. Phase
This item is used to adjust the picture apply to the TV (available range: 0 to 100).
5. Clock
This item is used to adjust the signals transfer speed (available range: 50 to +50).
NOTE: For other menus, please refer to the menu operations of DTV mode.
43
● Be sure to press POWER button to set the player to the standby mode and disconnect
the power plug before maintaining the player.
● Wipe the player with a dry, soft cloth.
● If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak
soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth.
● Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use
compressed air to remove dust.
● Contact a professional for assistance when wall mounting your TV. We are not
responsible for any damage to the product or injury to yourself, if you mount the TV on your
own.
● Do not wall mount the TV while TV is turned on. It may cause personal injury due to
electric shock.
● Use standard M6*10mm screws (4 pieces) to mount this TV.
MAINTENANCE
WALL MOUNTING
Back of your TV
44
Your TV is packaged with the Stand and the Cabinet separated. Before enjoying this TV,
please carry out the Stand Installation according to the instructions below.
Step 1
Place the TV faced down on a soft cloth
or cushion to prevent the panel from
being damaged.
Step 2
Align the Stand with TV bottom and then
force the end of stand until the TV is fully
seated on the stand.
Step 3
Tighten the included screws with a screw
driver.
NOTES:
- Unplug the power plug first when
installing or removing the TV Stand.
- This product is a 40” Series TV.
Contact one or more partner for
assistance when installing or removing
the TV stand.
STAND INSTALLATION
Press
45
Display Device
40 inch LED TV
Resolution 1920×1080
Pixel Pitch 0.46125(H)×0.15375(V) mm
Luminance 250 cd/m2
Contrast Ratio 5000:1
Aspect Ratio 16:9
Response Time 10 ms (Max. 16)
Viewing Angle 178(H)/178(V)
Visible Range
886.5(H)×499(V) mm
Life Time
50,000 Hrs
Movie: AVI, MPEG 1/2, WMV, TS
Music: WMA, AAC, AC3, MP3
Photo: JPEG, BMP, PNG, GIF
USB Multimedia
Playback Format
Text: TXT
Power Source AC 100~240V, 50/60Hz
Power Consumption ≤75W
Operation Temperature -5℃ to 45℃
Measurement 934(W)×246(D)×615(H) mm
Weight Approx. 9 kg
Specifications are subject to change without notice.
SPECIFICATIONS
46
Check the following points before assuming malfunctions of this unit:
Symptom[COMMON] Remedy
No power. Insert the power plug securely into the power outlet.
No picture. Ensure that the equipment is connected properly.
● No sound.
● Distorted sound.
● Ensure that the equipment is connected properly.
● Ensure that the input setting for the TV and stereo system are
correct.
● Adjust the master volume to a suitable volume by pressing
VOL+/VOL- button.
No operations can be
performed with the
remote control unit.
● Check the batteries are installed with the correct polarities.
● The batteries are exhausted: replace them with new ones.
● Point remote control at the remote control sensor and operate
it again.
● Operate the remote control unit at a distance of no more than
6m from the remote control sensor.
● Remove the obstacles between the remote control and
remote control sensor.
No key operation (by the
main unit and/or the
remote control unit) is
effective.
Disconnect the power plug and then reconnect it. (The player
may not be operating properly due to lightning, static electricity or
some other factors.)
Symptom[TV] Remedy
No or poor picture.
● Adjust antenna or use an external antenna.
● Relocate the unit near a window (if inside a building).
● Move units away from this product that causes interference.
● Do Auto Tuning again.
● Try another channel.
No sound or poor sound.
● Check the audio settings.
● Press MUTE button on remote control to cancel mute
function.
● Unplug the headphone.
Noise or other interface.
Electronic equipment near the unit is causing interface. Relocate
the unit or move the equipment.
GENERAL TROUBLESHOOTING
Loading...