Dual BTM60 QUICK GUIDE

BTM60

INSTALLATION/QUICK START GUIDE

Wireless Bluetooth Module

BTM60 INSTALLATION

Typical Installation

Installation Quick Reference

• Insert the mounting clip into the guide holes, and attach to the BTM60 module as
seen in the picture above.

• Mount the BTM60 onto the visor using the using the mounting clip, ensuring the
microphone is facing the driver. Refer to the picture below for reference.

• Carefully route the connection cable down the A-pillar of the vehicle, then to the
back of your Dual Bluetooth® ready head unit.

• Plug the BTM60 connector into the back of the head unit, making sure to line up
the arrows before connecting. Refer to the head unit owner's manual for more
information.

2