DTS V9 User Manual

Page 1
1
V9 USER MANUAL
Contents
BRIEF INTRODUCTION....................................................... 3
PRODUCT DETAILS ............................................................ 4
BASIC OPERATION ........................................................... 11
OPERATION OF PRODUCT USAGE .............................. 23
Page 2
2
NETWORK FUNCTION..................................................... 47
INSTALL AND USE OF BT/SAMBA ................................ 57
PRODUCT SPECIFICATION............................................ 67
MAINTENANCE NOTICE ................................................. 68
FAQ ........................................................................................ 69
OTHERS................................................................................ 77
Page 3
3
Brief introduction
Feature
The product is a new kind of family high-definition recorder. Via our new
products, you can record favorite program randomly and store it in the
device, avoiding the inconvenience brought by change tape frequently.
The product can provide long recording and good watching. Meanwhile,
it can also store and play many kinds of video files. The product can
support UPnP network of multi-media technology, network access
functions particularly. It supports BT/SAMBA and could download
network movies. You can also enjoy the internet service on line by using
the product, such as browsing videos, news and photos. The product,
which is facilitated with many port stand HDMI, can show you pictures
and videos with high definition. It is really your desirable entertainment
product.
Basic performance
Recording-support one –key rec, Time rec and Time shift recording.
TV-IN REC - Support television signal input and output functions.
Video decoding- MPEG 1/2/4, Divx,Xvid,H.264,VC-1,RM/RMVB
Video format-WMV9,MKV,MOV,AVI,MP4,MPG,TS/M2TS/TP/TRP,FLV,
ISO,IFO,VOB,DAT,RM/RMVB
Audio format- MP3,WMA, WAV, AAC,OGG,FLAC, Dolby digital
Page 4
4
Plus,DTS2.0+Digital Out
Image-JPG/BMP/PNG/GIF
Card-3 in 1 card(SD/MMC/MS).
USB HOST- Connection USB mass storage device (like USB Flash
Drive, MP3, USB HDD etc.)
USB2.0- high speed USB2.0 port.
HDMI- High Definition Multimedia Interface
External DVD - Support USB external DVD drive to play DVD movies.
Internet-RJ45 port,10/100Mbit/s, WLAN (IEEE 802.11 b/g/n) ,supporting
internet service.
Product details
Packing list
Check the accessories after receiving the product, below accessories
should be included.
Page 5
5
Front view
1 LED definition
LED
LED
definition
Instruction
REC
Rec LED
Turns red while recording
Power
Power LED
Turns orange while switched on
Stand-by
Stand-by
LED
Turns red light while stand-by.
2 Other definition
IR
Remote head
Remote control receiver
Card-reader
3 in 1
card-reader
Can read MS / SD / MMC card
Page 6
6
3 Button definition
Button
button definition
instruction
REC
REC button
Enter recording mode.
choose the Rec time
MENU
Menu button
Return to the main menu
Stop button
Stop current operation
Left button
Move cursor to left
Right button
Move cursor to right
OK
Enter button
Confirm the current
operation
Up button
move cursor up
Down button
Move cursor down
Power button
Switch on/off the power
Page 7
7
Back View
Port definition
Port
Port definition
Instruction
HDMI
High definition
port
Can output digital signal via
HDMI port
AV IN
Composite video
input port
Can input video and audio
when connected to video
device
Optical
Fine output port
Can output 5.1 audio via
optical port
AV OUT
Composite video
output port
Can output composite video
and audio
LAN
network port
Can connect to network via
internet port
USB
HOST
Outside USB
port
Can read outside USB
storage via USB port
Page 8
8
USB
DEVICE
USB port
Via this USB port for PC
communication
DC IN
Power in port
Can input power
ON/OFF
Power switch
Turn on or off power switch
YPbPr
Component
video output port
Can output progressive scan
component video
Remote control
BUTTON
FUNCTION
POWER
Turn on and off in the stand by mode
MUTE
Turn on or shut audio output
REC
Start recording in REC mode, and if press this key repeatedly you can select the recording time
STANDBY
Press it and enter the STANDBY mode, often using when the product is scheduled recording.
BROWSER
Enter the browser menu
TIMER
Enter the Time menu to edit, add, delete recording schedule
COPY
Enter the copy mode
HOME
Enter the main menu
AV/TV
Switch video input source between
AV and TV
TELETEXT
No function for the time being
Page 9
9
POWER
Turn on and off in the stand by mode
MUTE
Turn on or shut audio output
REC
Start recording in REC mode, and if press this key repeatedly you can select the recording time
STANDBY
Press it and enter the STANDBY mode, often using when the product is scheduled recording.
BROWSER
Enter the browser menu
TIMER
Enter the Time menu to edit, add, delete recording schedule
COPY
Enter the copy mode
HOME
Enter the main menu
AV/TV
Switch video input source between
AV and TV
TELETEXT
No function for the time being
EPG
No function for the time being
REC LIST
A list of the documents listed in
record
VOL-
Press to decrease the volume
VOL+
Press to increase the volume
Navigation key for up, down, left and right
ENTER
Press to confirm
RETURN
Return to the previous menu
SETUP
Enter the menu
Page 10
10
Press to input digital
GOTO
Jump to the appointed title, chapter or time when playing video ;jump to the appointed page when browsing files in multi-pages,
TV SYSTEM
Switch between different TV
system,
OPTION
Press to select option bar. To
rename or delete the file.
PLAY
Press to play file
Or play recording file under time shift mode.
STOP
Press to stop play/recording
PAUSE/STEP
Press to pause play/recording, and again for step playing
PREV
Press to return to previous file
NEXT
Press to go to next file
FR
Press to fast rewind from current play and again to select the speed
FF
Press to fast forward from current play and again to select the speed
SUBTITLE
Switch the subtitle if the file supported
DISPLAY
Press to display time, title, information of chapter when play video and photo.
AUDIO
Switch the audio format output
ZOOM
Press to zoom when playing back photos or Video programs.
Photo zoom levels:2X,4X,8X,16X;
Video zoom levels:2X,3X,4X,8X.
TIME SHIFT
Press to activate time shift in recording mode.
Operation as follow:
Page 11
11
Press ”Time shift” and wait until the screen display, Press “pause” to pause program, press “Play” to resume playback, and press “Stop” to stop time shift function.
If you need to use the Time shift function, please use the machine to format the hard disk first.
REPEAT
Press to set repeat option: chapter, Title or off
SELECT
Press to select the file and then press “confirm” to add
or delete file in the playlist, select copy files or folders in the copy mode
CONFIRM
Press to add or delete option in playlist
Basic operation
Power connection
Take out power adapter from the package and connect it.
Connection of TV audio and video output
The product is designed with multi-output, including
composite(AV),component(YPbPr) and HDMI. You can select different
interface according various need. The product can detect video output
automatically, making the operation friendly and convenient. Please
refer to the following instruction for connection to avoid any problem.
Page 12
12
Composite output connection(AV)
Plug the yellow connector into the AV output of product and AV input of
TV, and plug the red and white connector into the audio input of TV or
HIFI. Turn on the TV and select AV mode. Turn on the product and TV
displays the interface of initiation.
Component output connection (YPbPr)
Component output mode: Plug the YPbPr cable into the output of
product and input of TV. Because the cable is only for video signal,
another AV cable is necessary. Plug the red and white connector of AV
cable into the audio output of product and audio input of TV or HIFI. Turn
on TV and select YPbPr mode. Turn on the product and TV displays the
Page 13
13
interface of initiation.
Optical output connection
Optical outputConnect the Optical connector of the media player with
the optical connector of other video or audio device by Optical cable.
Then enter the product's audio interface, select the Digital Output option
"SPDIF LPCM" or "SPDIF RAW". It is available to enjoy 5.1 high quality
sounds through a multi channel decoder/amplifier with optical input.
HDMI output connection
HDMI is a output with best audio and video effect which outputs digital
video and audio composites at the same time. Connect HDMI cable to
output of product and display device with HDMI input. Select HDMI
mode in TV until it displays the interface of initiation.
Page 14
14
How to use memory cards
The Product has an integrated multimedia card reader supporting memory
cards including MS, SD, and MMC. Gently insert the memory card into the
reader with the arrow side upward until there goes a “click” sound.
Playback function
With this HDD Recorder & player, individual can browse movie, photo
and music files stored in HDD, USB, card and net work. Please enter
“browser” to select the media and press “ENTER” button to enter.
It is available to preview the selected media and press “ENTER” button
to play.
Connection of recording and usage
The product can support watching television programs at the same time
recording television programs. as well as other input signals are
recorded. TV signal can video from TV set-top box or satellite receiver,
as long as it is equipped with satellite TV set-top box or television
receiver ,users can achieve the recording function!
Important notice: The product supports TV recording from other set-top
box or satellite TV receiver. When the recording of signal other television
set-top box or satellite receiver input, please refer to the following
illustration to connect the product.
Page 15
15
A For set-top box or satellite TV receiver with two signal outputs,
please refer to below connection
BFor set-top box or satellite with only one signal output, please refer to
the below connection
There are AV in, AUDIO-R,AUDIO-L and optical output in the back of
product. Connect AV IN and set-top box or satellite TV receiver and
make sure the output of set-top box or satellite TV receiver works well.
Turn on TV and select AV mode. Turn on the product and select AV IN
Page 16
16
after enter the menu. The TV program displays on screen and is ready to
record.
Usage of starting Record
1,HDD Format
When using recording and if you choose HDD in REC Device (in Setup
menu) ,it is need to format the hard drive before recording ,please copy
files in HDD firstly in case of losing data. Then choose the HDD Format
option in System Setup menu. If your HDD is new, Please first initialize
the hard drive on your computer, then choose the HDD Format option in
System Setup menu to format the hard drive
HDD Format Steps:
Step 1: Setting time shift buffer
The product needs the special space for time shift to assign the hard
drive’s space. At least one hour, maximum 4 hours. One-hour hard disk
space occupied by about 4Gb, so choose up to 4 hours of space
occupied by time-lapse of about 16Gb.
Step 2: Hard disk format
Press “ ” and “ ”on the remote control to select “Back “ or “Format”.
When highlight move the “Format” button, Press “ENTER” to start.
Otherwise, select “Back” button to back.
Step 3: Completing HDD Format.
When HDD format is finished , the system will be restared to access to
Page 17
17
the product’s main interface.
2. Recording
When using recording function , follow the previous connecting ways
and select the option of AV IN in the guide menu.
AV IN mode
After correct connection of the AV-in signal, power on the set-top box (or
satellite TV receiver), TV and our recorder, switch the signal of TV to
AV-in signal,
If you only want to watch TV, do not power off the recorder and keep
the input signal of TV with the set-top box signal.
when you want to take down the program which one like, please choose
“the input video frequency” the option to enter the television picture
choose the television channel through the set-top box (Or satellite TV
Page 18
18
receiver).
Select “AV IN” menu to enter the TV screen, you can select the TV
channel through set-top box (or satellite TV receiver). and press REC
button to start recording.
Usage of Timer Rec
The TV Recorder & Player has the “Timer Recording” function that you
can plan recording schedules. After finishing the Time Rec schedule,
press the standby key on the remote. When the start time is on, the
device powers on and start to record according to the schedule set
automatically. After recording is completed ,the product will turn to
standby automatically. The” Timer Recording” function provides more
convenient for user
Watch the video recording
All the recorded files are recorded in a file folder named “REC”. Press
“REC LIST” button remote control or enter the “Browser” in the main
menu and select the “HDD”, you will find this folder and recorded videos
were saved in this folder named according to system time.
It is available to preview the recorded files and press “ENTER” button to
playback.
Connection and setup of network
The product can play the files stored in the network directly through
router hub. Please connect the RJ45 cable according to the following
illustration. The network connects well when the LED of network status
and W/R blinks.
Page 19
19
Connect one end of the RJ45 cable to the product like the PC does and
connect the video output. Press “setup” key or select “setup” menu in the
initiation interface. Select “Network” option in the setup window and
press “ENTER” to confirm. It is available for both automatic and manual
IP setup. Press “setup” key again to exist after setup. Before accessing
the PC through network by the product, the media files must be shared
in the network.
How to use USB HOST interface
Player with ability to expand large-capacity. The USB HOST port can
read external mobile hard disk, USB Flash Drive, digital cameras, card
readers and other data storage devices.
Even without the installation of hard drive players, you can connect
external storage devices through the USB HOST interface. To direct
Page 20
20
play a variety of high-definition formats high-fidelity audio and video files
stored in external storage devices. To watch HD movies and digital
photos are more palatable, at the same time the output digital audio
signals to audio equipment can feel the shock of high-fidelity sound
effects.
How to connect USB interface to PC
This HDD Recorder & Player is also a personal multimedia files storage
device and can be used by connecting to PC via USB interface.
1, Connect to the power supply
While using the HDD recorder & player with PC, power supply is also
needed.
2, Connect to PC with USB cable
Connect the HDD Recorder & player to PC with USB cable then you can
copy and transfer data.
Page 21
21
Follow the instruction of the above picture and connect the device to PC.
Power on the PC and enter the system. The PC detects the device
automatically and then the device can be used as an external USB
storage device.
After data transfer finished, please remove the USB storage device
safely (click the USB device icon to stop the USB device and then pull
out the USB cable).
Notes: 1, Please don’t power off when it connect to PC for reading
and writing.
2, If there is no USB detected after connected with USB
cable, maybe the PC is operating other program, please
pull off the USB cable and wait about 10 seconds then
connect again.
This HDD Recorder & Player is also a personal multimedia files storage
device and can be used by connecting to the PC. You can browse and
copy files easily.
Following is the setup of media file sharing in PC
Operation of file sharing under Windows XP
Two conditions are necessary for a successful play of network
connection.
Page 22
22
1. Folder sharing and safety setup
2. Set the same gateway and subnet mark address
Procedure of file sharing under Windows XP
1. Select the folder need to be shared, right click mouse and select
the option” Sharing and safety”, lift click the mouse.
2. Select “sharing” in the property option and select “share this folder
on the network” and click “Apply” for confirming to exist.
3. Open“ Control panel- Management tool-Computer
management-Local users and groups” and click “Users” option. Right
click Guest and select “Properties”.
4. Select 'users can not change your password' and 'password never
expires'. keep the other checkboxes unchecked.
5. Open” Control panel- Network connection”, and select “Local Area
connection” and right click to select “Properties”.
6. In the Pop-up window, select ‘Internet protocol (TCP/IP)’
7. Set up the relevant IP address, subnet mask and gateway, can
also choose to automatically design.
8. Completion of Windows XP network sharing.
9. Finally, please close the Windows Network Connection Firewall
Operation of file sharing under Windows Vista
1 Please make sure that the Vista operation system is installed as
Administrator supper user.
Page 23
23
2 From the desktop select ”start- setup-control panel-select user
account”
3 Open User account and select” open a new account” and name it
“Guest”
4 Select the folder need to share and right click the mouse, then
select the “sharing” option.
5 Open the shared folder and add guest account to the list
6 Give the right to all the users after adding the Guest into the list.
7 Select “sharing”, and then the folder is shared.
8 Finish sharing
9. Operate the device as the same as operate in XP system
Operation of product usage
Power on the Player, the system shows guide menu after a few seconds.
There will be six function options, or you can enter this guide menu by
press “Guide” button on the remote control.
Note: While connect the power supply for the first time, the device will
power on automatically.
Please go to the setup menu directly and set up the “Menu Language”,
“TV Region”, “Time setup” and so on when you use it for the first time.
Browser: Browse and play the media files.
With this function, you can browse movie, photo and music files stored in
Page 24
24
HDD, card, net work and usb by pressing the “Up” and “Down”
navigation buttons to choose the source devices and press “ENTER”
button to confirm, also you can press the “Browser” button on the remote
control to enter this function directly.
Rec_List: Quick automatic search function, can be directly into the
player recorded folder and play recorded files. the time of the recording
document to the order in which they are named.
AV/TV in: Select the input source to be watch and recorded.
Connect the device of the recording resources such as the DVB-T digital
terrestrial television or the set-top box receiver with AV-in output, enter
“AV in” menu, then you can watch or record the current TV program.
Timer : Plan recording schedules
With this function, you can create, edit or delete the schedule and view
status and history.
Please read the following instructions carefully to understand the
function of each option.
Internet Service: Offer a great many varieties of internet service on TV
With this function, you can access to news, video ,photo ,weather ,and
download interface on line by watching TV. You can enjoy many kinds of
internet service ,without using your PC to go to the internet.
Page 25
25
File copy: Copy files from one device to another
With this function, individual can copy files from Hard Disk, NET, USB or
Card from a media to another.
Setup: Enter the setup menu
With this function, you can configure System, movie, music, photo,
network and record settings.
Browser
Select “Browser” in the guide menu or press “Browser” button on the
remote control, then you can browse movie, photo and music files stored
in HDD, card, network and USB by pressing the “Up” and “Down”
navigation buttons to choose the source devices and press “ENTER”
button to confirm and play the files in the selected device.
Select the file or folder by pressing “Up” and “Down” navigation button
and press “ENTER” button to enter and play the files, press “Return” key
you can return to previous list.
File Range function
To make file browsing and playing easier, there is a function to range all
files into different folders named “All”, “Music”, “Photo” and “Movie”, you
can switch to any folder by pressing the “left” and “right” navigation
button.
Browsing Music
Page 26
26
Use the left and right navigation arrows to select the Music tab.
Press “ ” and “ ”to select the folder containing your audio files. A
thumbnail strip appears at the bottom of the screen, along with song
information. Press “ ” and “ ” to select the file you want to play and
press ENTER. This browsing music function supports MP3,WMA,WAV,
AAC,OGG,FLAC, Dolby digital Plus,DTS2.0+Digital Out …format
Playback.
Browsing Photos
Use the left and right navigation arrows to select the Photos tab.
Press “ ” and “ ” to select the folder containing your photo files. Enter
the folder press “ ” and “ ” to select the photo you want to view and
press ENTER the photo is displayed full screen. Depending on the type
and size of the picture, you may have to wait some time before the
playback starts.
If the SLIDESHOW is enabled in the Setup (“Photo Setup” menu) ,then
press Setup button to return to the pictures you want to playback, the
slideshow will start automatically.
If you want to playback some music during the slideshow, simply make
sure that you copy your music file(s) in the same directory as the
pictures. Then choose the “Folder” or “playlist” option In Background
Music (“Photo Setup ”menu). Press the ENTER button to playback your
slideshow with the music background.
While browsing a photo, you can press “ ” and “ ” to rotate a photo in
any angle. Beside rotating a photo, you can press ZOOM to zoom in/out
Page 27
27
that photo, four zoom levels(2X,4X.8X16X) are available. This browsing
photos function supports High Definition Photo (JPG,BMP,PNG,GIF)
Playback.
Note:
a) While listening to audio files, you can browse the photos at
the same time.
b) If you press ZOOM during playback slideshow ,the slideshow
will automatically stop.
Browsing Movies
Use the left and right navigation arrows to select the Movies tab.
Press “ ” and “ ”to select the folder(s) containing your movie files.
Enter the folder press “ ” and “ ” to select the movie you want to
view and press ENTER. The movie is played full screen.
This browsing movies function supports High Definition
Video(720p,1080i,1080p) Playback.
For example:
MPEG1(DAT ,MPG)
MPEG2(VOB, MPG, TS)
MPEG4(AVI,DIVX,XVID)
H.264(AVI,MKV,MOV)
RM/RMVB,FLV,ISO
Note:
Page 28
28
When play the HD Video, you can according the movie resolution to
adjust HD Video output. See “Creating TV System of SETUP menu” for
more details.
Browsing All
Use the left and right navigation arrows to select the All tab.
Press “ ” and “ ”to select the folder(s) containing your all
files(Besides Music ,Photo and Movie). Enter the folder press “ ” and
”to select the file you want to view and press ENTER to play.
Subtitles
The media player supports subtitle file formats including SSA,SMI,SRT,
SUB,TXT and so on . Make sure the subtitle file and the video file are in
the same folder .When playing the file, press SUBTITLE button to show /
hide the subtitle setting diagram and realize subtitles settings. When
playing a movie in the subtitles to display cases, press the arrow keys on
the remote control to select the options needing to adjust and press
ENTER to Confirm. Then we can set the text encoding format , audio
and subtitle synchronization (time syn), font size, font color, the location
on the screen display (offset) of the subtitle by pressing UP/DOWN
arrow key on remote control. Set the options you need and press
ENTER key to confirm the setting completed.
File Edit menu
Page 29
29
Select the file or folder by pressing the navigation buttons and display
Edit, individual can rename and delete files, press “ENTER” button to
confirm.
Return
Select to return to the main screen.
Rename
To rename a file, do as the followings:
1. Press “ ” and “ ” on the remote control to select
the Rename tab from the menu bar.
2. Press ENTER on the remote control. The name entry
screen appears.
3. Use the navigation arrows to select letters and
numbers. Select CAPS to toggle between uppercase
and lowercase letters. Press <- to delete a letter. Press
-> to insert a space. Press ENTER to input each letter or
number.
4. Once you have entered the new name, select OK and
press ENTER to confirm all changes.
If you want to cancel the naming during the process,
press Return.
Page 30
30
Delete
To delete a title, do the following:
1. Press “ ” and “ ” on the remote control to select
the Delete tab from the menu bar.
2. Press ENTER to confirm and delete the file.
3. A confirmation message appears. Press “
or“ ”and select OK.
4. Press ENTER to delete the selected file. To cancel
delete, select Return.
External DVD
The player supports USB connected external DVD drive. The product
can play DVD through connecting to external drive by USB. Meanwhile,
content in DVD can also be copied to the hard disk, and then operations
like backup information and so on can be done.
Connect the USB DVD drive to the peripheral port of the product through
USB data line, then choose External DVD in the homepage of the
product and enter. If there is playable DVD in the drive, and the DVD
automatic play option in the product’s system is on, the drive will start
playing the DVD automatically. In the playing process, you can press
“STOP” in the remote control to stop playing, then press RETURN to
return to the product’s main interface, and then press “STOP” in the
main interface to control the OPEN or CLOSE operations in the drive.
Page 31
31
Note: 1 External DVD driver can also support CD
NETWORK
When the product is connected to Network(referring to network settings),
you can choose the menu of NETWORK to access the shared files,
there are two options to choose: My Shortcut and My Neighbors.
My Shortcut
When you are browsing network, you can choose the computer name
from menu or you can set “Specific File Server IP” and access it from
“My _Shortcuts” in the menu.
My _shortcuts is the easiest way to get files from a computer previously
configured.
1) Press [OPTION] into My Shortcuts interface. Then, choose Add,
Modify, Delete, and Return.
2) Input Net User ID, Password, Specific File Server IP address.
3) When you complete settings, you can add a new shortcut.
4) Select it and input the password; you can browse photos, listen to
music, and watch videos through the network account.
Note: When dates are connected on computer with a HDD, USB device
or Card reader Network through the network, you can also browse
photos, listen to music or watch videos from these devices.
Page 32
32
UPNP
The full name of UPNP is Universal Plug and Play.
UPNP criterion is based on TCP/IP protocol as well as new internet
protocols aim at communication between facilities. In fact, UPNP is
made in the hope that all the facilities connected to the internet can
communicate without being interrupted by gateway in the future, so that
our communication in the internet can become more fluently, documents
transmission can become more convenient by using software that
supports UPNP, and internet applications which cannot be used before
can be operated in the future. These are all the convenience brought by
UPNP.
This product is a multimedia player that supports UPNP. Before using
UPNP function, please make sure that computer connected with the
product in LAN has installed software that support UPNP. If not, please
install a multimedia play software or share software that support UPNP
gateway protocol, and then open the UPNP share function in the
software, so that the access speed can be quickened largely.
For example, connect the player to the family LAN, and then multimedia
documents shared in the Media Player 11 software in the computer in
study can be accessed in the living room through UPNP.
Firstly, connect the player to the family LAN. You can refer to network
connection instructions to connect the player.
Secondly, install software that support UPNP gateway protocol.
Before using UPNP function, you need to install software that support
Page 33
33
UPNP gateway protocol in your computer and then start the share
function. Such as install a Media Player 11 software that support UPNP
function (remark: former edition of Media Player 11 doesn’t support
UPNP function) in your computer.
Thirdly, share documents through setting the software.
After installing the software, open the software’s interface, choose
“Media Base” in the main interface of the software, and then choose
“add to the media base” in the pull-down menu. After adding some
documents or folders to the media base, choose “media share” in the
pull-down menu. You can also set the types and positions for the shared
documents, such as “music, picture or video” and so on.
Fourthly, use the player’s UPNP function.
When the setting of the shared documents is finished, choose UPNP
option in the main interface of the player to enter, and then the player
can search out computers installed with UPNP software in LAN. Enter
your computer, and you can see multimedia documents shared through
Media Player 11 in your computer. Using UPNP is more convenient and
faster than using the player’s network function. The player can access to
computers without being interrupted by gateway, avoiding fussy
operations like inputting user name, password and so on. Meanwhile,
the function of UPNP is stronger, for example, through setting the
options of Media Player 11, multimedia documents can be chosen and
classified according to different ways, thus the information can be shown
in a more detailed way, helping you to find what you want among plenty
of documents, bringing convenience. All the above are advantages of
Page 34
34
UPNP.
Playlist
The product supports the playlist function, which allows you to add your
favorite content to the playlist. You can use the navigating keys “UP” and
“DOWN” to browse multimedia documents like pictures, music, movies and
so on in the hard disk of your player. Press “SELECT” to choose document
and press “CONFIRM” to add the document to the playlist. Next time you
can enter “Playlist” directly to choose shortcuts of the documents and play
them, avoiding trouble of searching documents, saving time for the users.
Use slideshow mode with a playlist:
1 - In the photo menu, select background Slideshow then "Playlist".
2 - Select "Local HDD”, then press “Music".
3 - When in Music mode, press [select] on remote to add files to playlist,
and then press [Confirm] to save selection.
4 - Go to menu " Playlist”, then press right key on remote control to
select "All Media". mode
5 - In "All Media", mode start slideshow by pressing [Play], and the
music starts automatically.
Use the slideshow mode with the contents of a folder:
1 - In the Setup menu Entertainment, select background Slideshow, then
"Folder".
2 - Copy photos and music you want to play during slideshow in same
Page 35
35
folder.
3 - Then start the slideshow by pressing [Enter]. The photos and music
in the folder will be read simultaneously.
Notes: 1.Only documents contained in the disk can be added to the
playlist.
2. Product for the first time using the hard disk, you must first format the
hard disk with the machine in order to use this playlist function, and not a
computer to format
AV IN
Select AV IN and press ENTER. Then you can enjoy and record the
video which input from other video in sources. It is important that the
hard drive must be formatted before recording, ,referring to the “HDD
Format” in system menu ( “Setup Menu”).
In AV IN, press “REC” on remote controller or panel control to start
recording. Press “Stop” to stop recording.
Time shift
Press “time shift” to active the function, and “play” to continue normal
play, “pause” to
hold on, “stop” to cancel the “time shift”
Permanent “time shift”, TV channels will be recorded automatically, user
could view by “skip forward“‘fast rewind’‘play’ at any time.
Note: It is need to format the hard drive before using Time shift ,referring
to the “HDD Format” in system menu ( “Setup Menu”).
Page 36
36
Timer
Timer allows you to create, edit and delete recording schedules and
view all schedule status and history. Select Timer Record from the
Guide menu, there are four options: Edit, Delete, Status and History.
Please press “ ” and “ ” button select.
Creating a New Schedule
1. Select “Edit”.
2. Press “ ” and “ ” to select “Add a New Schedule” and press
“enter”. The schedule setting screen appears.
3. There are six options on the screen, please do the settings
accordingly.
Source
Video in
Start time
date and time for recording
Length
Length for recording
Repeat
Choose any recording cycle, Once, Saturday, Friday, Thursday, Wednesday, Tuesday, Monday, Sunday, and so on
Device
HDD, USB1,USB2
Quality
HQ, SLP, EP, LP and SP. Higher quality requires bigger capacity. It is available to check the spare capacity and time for each recording in “Local/USB device available capacity in the left
Nicam
On/off ,Nicam is shorts for near instantaneous compounded audio complex . If it is selected ,the recorded audio has high quality stereo effect when playback.
Steps of “Timer REC” set up:
1 Enter “Timer” in the main menu
2 Select “Edit” from menu and select “Add a New Schedule”, then press
Page 37
37
“ENTER” key t o enters.
3 In “Recording schedule set up” menu, find the rest available recording
time according to different recording quality level. Press the
navigation keys to set up the recording time, length, quality level,
place to save the recorded files and repeat recording time.
4 After setting up is finished, press “ENTER” key to confirm, you can
select “confirm” or “cancel” to finish the recording schedule set up.
5 You can set up one or more recording schedules and edit them.
Warning: After set up the “Timer REC” schedule, please make sure that
the set-top box or satellite television receiver is power on, and keep the TV
with the channel you want to record programs, otherwise, the recording
programs will not be what you want to record.
NOTE:1When you want to set schedule recording , it is advised that 5
mins ahead of schedule an appointment.
2This Unit features the ability to record scheduled programs
from Free-To-Air TV. For best results, we recommend you let the
product powered-on whenever you have programs scheduled to record,
rather than place it in stand-by, and do not make the unit busy with
other functions, such as file-copying, BT downloading, at the same time
your recording is due to start.
3Please note that recording is not possible while the Unit is
directly connected to a host PC as a Mass Storage Device via the USB
cable.
Page 38
38
STAND BY
After set up the “Timer REC” schedule, you can press STANDBY to
make the product enter standby mode. And it is time to record that has
scheduled; the product will start to record automatically. After recording
is completed ,the product will turn to standby mode automatically.
Watch the video of recording
All the recorded files are recorded in a file folder named “REC”. Press
“REC LIST” key of remote control or enter the “Browser” in the main
menu and select the “HDD”, you will find this folder and recorded videos
were saved in this folder named by system time. You can also select the
REC List on the guide menu to open the recorded files.
It is available to preview the recorded files and press “ENTER” key to
playback.
Internet Services
If the product is connected well to the Internet (details referring to the
wired lan setup or wireless setup), you can enjoy internet services.
Internet Services includes various kinds of services on line, by which you
can browse video, news, photos and weather on the internet without
using your PC. Select the Internet Services in the guide menu and press
ENTER key to confirm. As a result, you can access to the interface of
Internet services management, which includes YouTube, BBC, CNN,
NPR, Lefigaro, Flickr and Picasa.
Page 39
39
Note: the firmware of product may be updated anytime, please refer to
the instruction of actual delivery.
Video
If you want to browse video, you just need to click the video website
icon( Such as YouTube) on the main interface by pressing the
navigation key on the remote control and pressing ENTER key to
confirm. Select any one of the videos that you want to watch ,thus you
can watch all kinds of wonderful video files on line. If you want to browse
videos, the system will display a great many varieties of videos, thus you
can choose your favorite video to playback.
For example , after entering the YouTube interface, you can use the
following functions: Recently Added ,Recently Featured ,Top Favorites
and so on. Press the / key to select your favorite video and press
ENTER key to confirm, Thus you are able to watch your favorite video to
playback.
Note: The content of Internet is provided by internet service providers.
The product just provides the click platform, and can not guarantee
whether the service provider could provide the service of transmitting
data continuously.
News
Page 40
40
If you want to browse news, you just need to click the news website icon
( Such as BBC News, CNN News, NPR News) on the main interface by
pressing the navigation key on the remote control and pressing ENTER
key to confirm. Then you can enter news management interface.
For example ,if click the BBC News icon ,you will find the interface which
includes News Front Page, Business News , Asia-pacific, etc. Press the
/ key to select your favorite news and press ENTER key to confirm,
then you are able to browse various kinds of news , referring to sports,
finance, entertainment and so on.
Photos
If you want to browse photos, you just need to click the photos website
icon (Such as Flickr or Picasa) on the main interface by pressing the
navigation key on the remote control and pressing ENTER key to
confirm. Then you can enter photos management interface.
For example ,select the flickr photos website and press ENTER key to
confirm. Then you can enter photos management interface ,where you
can find the titles on the upper left corner :search photos ,previous page,
and next page.
If you want to search photos ,just click the title Search Photos, the
screen will display a keyboard interface used to input the content you
want to search such as dog),and press ENTER key to confirm, so you
are able to browse all the photos about dog ,when you just need press
Page 41
41
navigation key to select the one you are interested.
Previous/Next page: the option is used to turn previous or next page.
Weather
Press the navigation button on the remote control to select the Weather
and press ENTER button to confirm. Then you can enter the interface of
weather forecast management ,where you can find out the weather
forecast of many areas in world, including Asia, Europe and USA.
Choose any one of the titles and press ENTER button to enter ,you will
find detailed information of different countries’ and place’s weather
forecast. For example ,if you want to know about the weather in Hong
Kong, just select Asia and press ENTER button to confirm ,then select
China , the screen will display all the city’s names. At this time, press
navigation button on the remote until you find Hong Kong. Press ENTER
button to confirm, the screen will display the weather of Hong Kong.
File Copy
The File Copy allows users to copy files between USB, CARD, HDD,
NET. Select “File Copy” from the Guide menu or select “COPY” on the
remote control .It is very easy to copy files between various devices.
Copying operation
Page 42
42
Step 1: Select Source Device
Press “ ” and “ ”to select the device which need to copy at first after
entering the File copy interface,. Then press “ ”to select Destination
Device, press “ ” to return.
Step 2: Select Destination Device
Press “ ” and “ ” to select the device of the Destination after go to
Destination sector. Then press “ ”o next step, and press “ ” to
return.
Step 3: Select copy files or folders
At Source sector, press “ ” and “ ”to select and press “SELECT” to
select file or folders which need to copy. “”.appears at right side of
selected file or folder. Then press “ ”to next step, and press “ ” to
return.
Step 4: Select the folders of Destination
Press “ ” and “ ” to select a target folder at the destination sector.
Then press “ ”to next step, and press “ ” to return.
Step 5: Copy Status
At top menu, select YES to copy, select No to cancel.
After copy finishing, the system will display “File Copy is completed!”, or
will display “File Copy failed!”
Select “YES” to browse the copied files, or select “No” to return to Video.
Setup Menu
Page 43
43
Select” Setup” option or directly press “Setup” button on the remote
controller to enter the setup menu. It is possible to configure TV, Audio,
Video, Rec, Network, System and MISI.
Select any option by pressing “ ” and “ ” on the remote controller,
and press ENTER to confirm or press “Return” to exit. Press “Setup”
button again on remote control to exit from setup menu.
System Setup
Menu Language
Setting screen display language, Simplified Chinese, English,
Traditional Chinese, Spanish, French, German, Italian, Dutch,
Russian. Swedish
Text Encoding
Setting text encoding language, Unicode (UTF8), Simplified
Chinese (GBK), Traditional Chinese (BIG5), Western, Turkish,
Central European, Cyrillic, SE European different languages and
so on. Please select the corresponding text encoding, might be
garbled characters.
subtitle
ON/OFF the subtitle function
Screen Saver
Off /On. select to turn on or off screen saver.
DVD Auto-Play
Set DVD drive to play on or off automatically.
Login Control
ON/OFF. If Login control is ON, you are acquired to input the
username and password when you login the neighbor web,
otherwise you can directly login without inputting anything.
BT/Samba Info
Showing player BT/Samba installation information.
Time
Set the system time Manual
HDD Format
Select to HDD Format.
System Update
View the current software version and update the software of the
product.
Restore Default
To restore the factory’s default settings
Video Setup
Page 44
44
Movie
preview
Off/On, when it is on ,the movie can be previewed on the
lower right corner of the screen.
Resume Play
Off/On.
When the movies did not play at the end of the
suspension, the product will record video of the time
suspended, the next player can choose " Resume Play"
can continue from the last interruption point in time to
start playing.
Seamless
playback
ON/OFF If selecting seamless playback, the movie which
has many chapters of HD movie in the same folder can be
playback successively without buffer.
Aspect Ratio
Pan Scan 4:3, Display a wide picture on the entire screen
and cuts off the redundant portions when a standard 4:3
TV is connected.
Letter Box 4:3, Display a wide picture with two black
borders on top and bottom of 4:3 screen when a standard
4:3 TV is connected.
16:9: Compress the image to convert the whole image
when a 16:9 TV is connected.
16:10: Compress the image to convert the whole image
when a 16:10 TV is connected.
Brightness
Select to set brightness levels.
Contrast
Select to set contrast levels.
TV System
Select to adjust TV system.:NTSC,PAL,480P,576P,720P
50HZ,720P 60HZ,1080i 50HZ,1080i 60HZ,1080P
50HZ,1080P 60HZ
Page 45
45
1080P 24Hz
To achieve better viewing, the film could be playbacked at
uniform speed.
Audio Setup
Night Mode
There are “On” “off” and “Comfort” modes.
In comfort mode, it restricts the volume automatically
so that it would not affect the peoples’ rest or working.
Digital
output
HDMI LPCM: The digital audio signal which is
decoded by the product outputs
through HDMI 2.0 channel
HDMI LPCM MULTI CH: The digital audio signal which
is decoded by the product outputs
through HDMI 5.1 channel.
HDMI RAW: The raw digital signal of the multimedia
data directly outputs through HDMI, at
this time the remote control has no
function of adjusting the volume.
SPIDF LPCM: The digital audio signal which is
decoded by the product outputs
through optical .
SPIDIF RAW: The raw digital signal of multimedia data
directly outputs through optical ,at this
time the remote control has no
function of adjusting the volume.
Page 46
46
NOTE: If selecting HDML LPCM/RAW, there is no signal output through
optical. If selecting SPDIF LPCM/ RAW, there is no signal output
through HDMI.
Photo Setup
Slide Show
Timing
Set time interval of slide show. 2/5/10/30s,1minutes,2
minutes
Transition
Effect
Select a picture transformation effects, there are eight
different effects to choose.
Background
Music
the music must be in the same folder or playlist, and you
can choose background music’s position by the navigation
REC Setup
Quality
Recording quality setting: HQ, SP, LP, EP, SLP
The highest quality is HQ, which requires the most
storage capacity . But the other settings reduce
recording quality sequentially require less storage
space accordingly.
Permanent
Time shift
Set the Permanent time shift on or off.
REC Device
HDD, USB
Page 47
47
Network Setup
Check the following items before use this function:
Connection between product and network
Network protocol is available
PC firewall must be shut down
Files are shared
AutoAutomatically set IP address
Wired Lan Setup
and Wireless Lan
Setup
Manual: select IP address, subnet mark address and
default gateway. It is available through navigation
and numeric key and press “enter” for confirming
Pppoe setup
Plug the LAN port using the cable, then input the
username and
Password (provided by the ISP) in the box. Then
press ENTER key to confirm. When the connection
is success, you can get a IP address.
Network Function
You can streaming playback the multimedia files from network and have
file copy function through network.
Wired Lan Setup
Page 48
48
Access the player to LAN, and press “Setting” in the remote control to
enter the setting interface of the player. Select “Network” and enter
“Wired Network Setting”. You can choose automatic or manual mode to
do the setting.
DHCP IP (AUTO): To get the IP address of the domain name server
automatically. Select DHIP and then choose “ENTER” according to the
operation clues. The player can search and get IP addresses
automatically. If the connection is successful, the gained IP addresses
will be shown on the screen. If no IP address is shown on the screen, the
connection is unsuccessful, thus you need to check the network
connected to see if it has been set according to the requirements. Then
try to get IP addresses again.
FIX IP (MANUAL): To set the fixed IP address, subnet masks and
default gateway and so on manually. Please input information by
navigating keys and number keys and finally press “ENTER” to make
confirmation and start testing. Parameters of the network connection of
the product will be shown if the connection is successful.
1. Select “Network” in the home page of the product. If there are open
groups in the sharable wire network, other sharable working group
folders, such as WORKGROUP, will exist besides MY
_SHORTCUTS and MY_NEIGHBORS. Select and enter
corresponding folder, then you can play multimedia content shared
in the network of the computer.
Page 49
49
2. If there are no other sharable folders, select “MY_SHORTCUTS”
and enter. Press "OPTION" in the remote control, and choose
“Add” in the open window to create a new shortcut for computers
that have set network share. Input your user name, password and
IP address of the appointed document server. User name is
GUEST or EVERYONE and the IP address of the appointed
document server is the IP address of the computer that has set
network share. There can be many sharable computers in the wire
network, input the IP address of the computer you want to access.
3. If the connection is tested to be successful, save the setting.
Choose the newly created shortcut to enter. Input username
GUEST or EVERYONE and password, and then you can access to
the appointed IP address and get the shared content in that
computer.
4. The product can play multimedia documents in the shared content.
If videos are played, there will be network connection speed shows
on the screen. Higher speed indicates that the network is more
stable and the quality of the video will be better. The product can
also connect TV in the living room with computer in the study
through wire network connection, thus wonderful movies shared in
the computer can be played in the large TV screen, creating a new
experience of home theater.
Wireless Setup
Page 50
50
If it is the first time for you to use wireless network function, please do
the following setting:
Access your player to the Local Area Network (LAN), and press “Setting”
in the remote control to enter the player’s setting interface.
1. Select “Network” and enter "Wireless network setting", choose the
file name of the connecting configuration. Then the clue of “Press
‘ENTER’ in the remote control to connect, and press ‘ENTER’ to
test the selected connection” will show on the lower part of the
screen. Press “ENTER” to connect. There are two connection
modes to choose: "AP" and “Ad Hoc”.
2. If select “AP” mode, the player can detect wireless signal sources
within the searching scope of the configured wireless network card
and the interface will show all the detected wireless SSID.
3. If select “Ad Hoc” mode, the player can access to sharable content
in specific objects. For example, the product and computers can
connect and exchange data through choosing “Ad Hoc” mode
without using wireless Routers.
4. Connect the product’s antenna with a USB wireless network card,
put through the antenna, and then you can set the wireless network
according to the following steps. If no external antenna is
configured to the product, a USB wireless network card that
supports 802.11 b/g/n protocol will be needed to insert into the USB
HOST interface of the product. Then “WIFI PLUG IN” will show on
the screen. Thus you can start to set the product’s wireless network.
The following is detailed description for the operations of two
Page 51
51
wireless network connection modes:
Infrastructure(AP) setting
1. Select “AP” to get SSID names. You can choose automatic update
and the product will search all the wireless SSID within the
searching scope of the wireless network card automatically.
2. After the searching finished, all the searched SSID will be shown
on the screen. Choose the server’s SSID you want to access, test
the connection and save the setting information. On the bottom
right corner, there will be a green symbol showing the signal
strength.
3. Select “Network” in the home page of the product. If there are
open groups in the sharable wireless network, other sharable
working group folders, such as WORKGROUP, will exist besides
MY _SHORTCUTS and MY_NEIGHBORS. Select and enter
corresponding folder, then you can play multimedia content
shared in the network of the computer.
4. If there are no other sharable folders, select “MY_SHORTCUTS”
and enter. Press "Edit" in the remote control, and choose “Add” in
the open window to create a new shortcut for computers that have
set network share. Input your user name, password and IP
address of the appointed document server. User name is GUEST
or EVERYONE and the IP address of the appointed document
server is the IP address of the computer that has set network
Page 52
52
share. There can be many sharable computers in the wireless
network, input the IP address of the computer you want to access.
5. If the connection is tested to be successful, save the setting.
Choose the newly created shortcut to enter. Input username
GUEST or EVERYONE and password, and then you can access
to the appointed IP address and get the shared content in that
computer.
6. The product can play multimedia documents in the shared content.
If videos are played, there will be network connection speed
shows on the screen. Higher speed indicates that the network is
more stable and the quality of the video will be better. The product
can also connect TV in the living room with computer in the study
through AP wireless network connection, thus wonderful movies
shared in the computer can be played in the large TV screen,
creating a new experience of home theater.
Peer to Peer (Ad Hoc) setting
Ad Hoc mode can build a peer-to-peer network structure without
wireless AP. Computers configured with wireless network card can
connect with each other wirelessly through this mode. The network
building process for Ad Hoc wireless LAN is very simple as it leaves out
wireless AP. But the transmission distance for wireless network card is
generally around 40m in indoor environment, when the distance
exceeds this effective transmission distance, communication cannot be
Page 53
53
realized. So this mode is suitable for simple and provisional wireless
connection requirements.
The operations introduced below will show you how to connect the
product with computer through Ad Hoc mode.
1. Firstly, set the product’s wireless network, select “Ad Hoc” and
enter.
2. Set the product’s wireless SSID name in the wireless network. You
can edit the name whatever you like. Other computers configured
with wireless network card can see the SSID name of your product
through searching.
3. Select security modes for your wireless network: open system or
WEP (Wireless Equivalent Privacy). If you choose open system,
other computers configured with wireless network card can connect
with your product freely when searching out it. If you choose WEP,
you need to set the shared key (10-25 numbers), and then other
computers can connect with your product after inputting network
key.
4. Set the IP address of your host, making sure that the address will
not conflict with IP addresses of other wireless facilities. When the
above three settings are finished, press “ENTER” to save your
setting and start testing. If the connection is tested to be successful,
interface showing network information will be displayed. Then you
can check the set parameters.
Page 54
54
5. When the setting of Ad Hoc wireless network for the product is
finished, you need to start the wireless network function of the
computers which your product needs to connect. This description is
for operations under WINDOWS XP system, and operations under
other WINDOWS operating systems are similar to this.
6. Select “My Computer” in the desktop, choose “Management” by
clicking right key on the mouse to enter the computer management
interface. Double click “Service and Application” to enter the
program. Select “Service” and enter.
7. Double click “Wireless Zero Configuration” in the last third one of
the “Service” options to enter its window of attribute. Then select
“Startup” in the routine options of the window, and click “ENTER”,
thus the wireless network function of the computer is opened.
8. If your computer configures with internal wireless network card
(such as most of notebook ENTER PCs) and has started the
wireless network function, it can search out the product’s SSID and
connect with the product. If your computer doesn’t have internal
wireless network card (such as most of desktops), you can insert a
USB wireless network card that supports 802.11 protocol into the
computer’s USB interface and install drive for the network card.
You should inactivate wired network of the computer before
configuring the wireless network.
9. Then there will be an icon representing wireless network and
showing in the status bar in the bottom right corner of the
computer’s desktop. Click the icon, and a status window of the
Page 55
55
wireless network connection will show. Click “Check the Wireless
Network”, then wireless network SSID within the searching scope
will be shown on the interface.
10. Select the product’s SSID and the computer’s Ad Hoc connection
icon in the window of wireless network connection, and click
“Connect”. There will be a clue to indicate that the connection is
successful if the wireless network Ad Hoc connection is done. Then
click “Support” in the window of wireless network connection status
to see IP address and so on network information gain from the
wireless network. Do remember the computer’s wireless IP address
because you need to use it when the player needs to access to the
computer.
11. Enter “Network” in the homepage of the product, select
“MY_SHORTCUTS” folder and enter. Press “Edit” in the remote
control and choose “Add” to create a new shortcut for accessing to
other computers, and then input user name, password and IP
address of the appointed document server. User name is GUEST
or EVERYONE and the IP address of the appointed document
server is the wireless network IP address of the computer that has
built Ad Hoc connection with the product. There can be many
computers building Ad Hoc connection with the player at the same
time, input the IP address of the computer you want to access.
12. Save the setting and choose the newly created shortcut to enter.
Input user name GUEST or EVERYONE and password, and then
you can access to the appointed IP address and get the shared
Page 56
56
content in that computer.
13. The product can play multimedia documents in the shared content.
If videos are played, there will be network connection speed shows
on the screen. Higher speed indicates that the network is more
stable and the quality of the video will be better. The product can
connect TV in the living room with computer in the study through Ad
Hoc wireless network connection, thus wonderful movies shared in
computer can be played in the large TV screen, creating a new
experience of home theater.
PPPoe Setup
PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by
many ADSL Internet Service Providers. If your ISP uses PPPoE, but has
given you a router, you may need a PPPoE client on your Linux box.
DHCP may work fine. The product ,as a PPPoE client for Linux and
Solaris systems to connect to PPPoE service providers.
The product is ideal for users with a DSL "modem" whose Internet
service provider uses PPPoE. Before you use this function , check
whether or not you really need it.
If your product is connected to network via DSL and PPPoe, the DSL
service provider will provide a username and password for you to log in.
After passing security authentication by telecom operators, the user can
get the IP address and then the product is connected to internet.
Page 57
57
The operations for PPPoe setup as following:
Step 1: Firstly use a telephone line to connect to the modem which
supports PPPoe , then connect the product to the modem via RJ45 port.
Step 2: Select the option “PPPoe setup” in the network setup in SETUP
menu. Input the net user ID and password which are provided by
telecom operators .Then press ENTER button to confirm.
Step 3: For several minutes, the user can get a IP address which is
configured by Ethernet .It indicates the net connection is success.
Install and use of BT/SAMBA
Player is a system, which is consist of operating system (Linux+AP) and
application software (BT/SAMBA).
The first install
When using the function of BT/Samba for the first time , please enter the
item of System in the menu of Setup to check the BT/Samba information.
If the BT/Samba is uninstalled yet, please install it firstly. Please copy
the four installation files(.ipk) in the BT/Samba installation package to
the root directory in the U disk, and insert it to the product’s USB host
port. Finally select HDD Format in the System menu under the Setup
interface.
Page 58
58
Operation steps:
Step 1:Press “ ” and “ ” on the remote control to select you wish.
When highlight move the OK key, Press “ENTER” on the remote control
to enter the next step. Otherwise, select CANCEL to return.
Step 2: Hard disk format
Press “ ” and “ ”on the remote control to select “Back “ or “Format”.
When highlight move the “Format” key, Press “ENTER” to start.
Otherwise, select “Back” key to back.
Step 3: Install BT/Samba Extension
After format complete, the system will install BT/Samba automatically.
Please select OK to the next step.
The system will install automatically according the following steps.
1) Install BT/Samba Extension
2) Install Bit-Torrent Support
3) Install Samba Server Support Installing
4) Install Web Support Installing
When the installment is completed, the system will display success at
the end of the steps.
Step 4:Congratulation page
When completing the format, the system will display the congratulation
page.
Select OK key and Press “ENTER” to exit. And the system will boot up
Page 59
59
automatically.
The usage of BT
IP address setting
You can obtain a product's IP address to accordance with Wired LAN
Setup in front of introduced.
1. 1) Obtain IP address automatically
The system will obtain the IP address automatically via DHCP
protocol if the local network has DHCP server available.
2).Use static IP address
Acquire a unique IP address, Subnet mask, and Default gateway
information from your network system. Then fill in.
2. 1).Obtain DNS server address automatically The system will get DNS
server addresses from DHCP server if available
2)Use static DNS server addresses Specify DNS server address.
Neighbor Web interface
When you get BT Player’s IP address, launch your web browser ,type
the correct IP address in the browser, you can into Neighbor web
interface. The Username is admin and the initialization password is 123.
Page 60
60
At Home page, the “Neighbor web” will display BT Player’s status and
storage device.
BitTorrent Download
At Home page, Select “BitTorrent Download” into download interface.
Page 61
61
Add new torrent
Select into add new torrent file page.
At “add new torrent” page, click browse key to choose torrent file path
from local PC. When you select a torrent file, press “Open” key to add.
Next , click “Yes” to confirm your select file and back BitTorrent
download page, otherwise click “No” do nothing and back BitTorrent
download page.
When select “Yes”, the page will display “torrent added…You will
automatically redirect to web torrent home page” before back download
page.
1) Click “start” to begin download
Page 62
62
Click every torrent file name, at the bottom of page will display the
torrent file information.
And you can double click every file, when the left of little frame display
,it means the files be choose.
Then you can operate to select “start” ,”stop” ,”delete” ,”Refresh” and
sort order “up” and “down”.
2) BitTorrent Setting
Press “Setting” into BitTorrent setting page.
Page 63
63
Set BT storage, Max download rate, Max upload rate and seeding
setting in this setting page.
When setting completed, Click to save or Click to
return or Click to come back default setting.
Visit neighbor
At home page, select “Visit neighbor” to browser the HDD files. If the
player’s Login Control is on, you need to input the username is admin
and the initialization password is 123.
Account Management
At Home page, Select “Account Management” into Account
Management page.
Page 64
64
If click “Account Management” is not into this page, please confirm Login
control is set to ON. Please see the “Login control” for more detail.
The Username is Admin and the initialization password is 123. Please
setting password according your favorite .
login password can be modify at here. Please input password twice and
click “Enter” to confirm. When modify is succeed, press “Confirm” at the
pop menu and return. Please note the User name cannot be change.
The usage of SAMBA
The product supports the function of SAMBA by which you can visit your
hard disk’s contents in your PC conveniently. It is necessary to make
Page 65
65
your PC and product in the same WLAN. Before using this function, it
must connect the product’s LAN port to the internet by using the network
cable .Then enter SETUP menu to select the NETWORK option to
achieve a IP. The following is about how to get IP and how to use
SAMBA..
IP address setting
You can obtain a product's IP address to accordance with Wired LAN
Setup in front of introduced.
1. 1). Obtain IP address automatically
The system will obtain the IP address automatically via DHCP
protocol if the local network has DHCP server available.
2). Use static IP address
Acquire a unique IP address, Subnet mask, and Default gateway
information from your network system. Then fill in.
2. 1).Obtain DNS server address automatically The system will get DNS
server addresses from DHCP server if available
2).Use static DNS server addresses Specify DNS server address.
If found, the IP will be shown. If not found IP, Please check the Network
setting on the product.
If your PC is connected to the WLAN and you want to use the function of
Samba, you can also get the IP address by wireless setup by referring to
Page 66
66
the previous chapter about wireless setup.
When you get product’s IP address, launch your web browser ,type the
correct IP address in the internet browser, you can enter Samba
interface.
You can also input the \\ IP address ( e.g. \\192.168.1.125) in your
computer’s address column, then press ENTER to open the Samba
interface. It will display the partition of your hard disk. Thus you can read
files or add new directory, copy or delete files from it.
Page 67
67
Product Specification
Hard disk support
Standard SATA 3.5” Hard Drive
HDD partition
FAT32 and NTFS partition
USB host
Supporting multiple USB storage
USB port
USB 2.0 high speed port
Network connection
RJ45 10/100M connection, WLAN (IEEE 802.11
b/g/n)
Video output
Composite video /component video/HDMI
Audio output
Stereo/digital HDMI/Optical
Input
Audio: stereo(L/R)
video: composite(CVBS)
Card
SDMMC, MS
Audio
Format:MP3,WMA,WAV,AAC,OGG,FLAC
Dolby digital Plus,DTS2.0+Digital Out
Video
Video decoding MPEG 1/2/4, Divx, Xvid,
H.264, VC-1, RM/RMVB
Format: WMV9, MKV, MOV, AVI, MP4, MPG,
TS/M2TS/TP/TRP, FLV, ISO, IFO, VOB, DAT,
RM/RMVB
Subtitle
SSASMISRTSUB, SUB+IDX,TXT
Picture
JPG/BMP/PNG/GIF
Video record mode
Surport 5 recording modes :HQ/SP/LP/EP/SLP
Record image
NTSC:720 X 480 , PAL: 720 X 576
Page 68
68
Power adapter
AC input100V~240V 50/60HZ
DC output12V, 2A
Dimension
256.1×164.5×51.3mm
Weight
About 1Kg (Without hard drive)
Note: Up to the improvement, the appearance and specification will be
changed accordingly without notice.
Maintenance notice
To protect the normal use of all accessories, please kindly make sure
understand and pay attention to following points.
Power input AC100~240V,output DC 12V/2A.
Under normal working status, power adapter will keep warming,
but body temperature of 60 degree or under is normal.
Please be sure of aeration under normal working status, do not put
the device in bed, sofa, or similar area where cooling effect is no
good.
Please do not tear down personally, but send it back to the pointed
service agent, or there will be danger of electronic shock.
Please pull out the cable and shut the device immediately when
cable broken or liquid in, and send to pointed agent for repair.
We advise to use the product in the environment of room
temperature. The range of environment temperature is 0~40℃.
Page 69
69
FAQ
QThe green icon appears but no disk symbol when the new product
connects to the system.
A:The new hard disk may not be formatted, please check the chapter of
partition and formatting
Q:The hard disk can not be recognized under Windows 2000 / Windows
XP operation system. Which remind the connected device can not be
recognized.
AIt may because the original USB driver get lost. Please reinstall your
operation system, research the driver disk or serve the internet to
research USB2.0 driver procedure.
QWhen I try to disconnect the USB device, I keep on getting The
device Generic volume cannot be stopped right now. Try stopping the
device again later message, what should I do?
AClose any program that might be accessing data on the player,
including Windows® Explorer. If it does not work, close all programs and
wait for another 20 seconds, then try the green arrow icon again. If it still
does not work, you should shut down the player and disconnect the USB
cable.
QDuring power on, why the TV will have a short flash, blue screen or
Page 70
70
screensaver?
A This is normal, when the system initialize, it will setup the
corresponding parameters so it can output the correct video signal to the
TV, during the initializing time, the TV will receive incorrect signals or the
signals will not be stable and will cause the TV screen to flash, some TV
will treat it as no signal, and will display a blue screen or screensaver.
QWhy there is no sound in movie, music playback when using YPbPr
output?
AYPbPr output is a video output only, and does not include sound
signals, when using YPbPr output, please plug the AV OUT or the
S/PDIF jack to output sounds.
Q: I have connected the Player to my television. Why is no picture
showing on my television or no sound coming from my television?
A: This problem may have several causes. Please check the following
items:
1) Please ensure that you have selected the correct AV source on your
television set.
2) Please check that you have connected the correct cable for the output
of the video and audio signals. Information on the correct connection of
the Player to your home entertainment system can be found in the "
Connection of TV audio and video output " chapter in the basic operation
instructions.
3When the player is connected to HDMI or optical ,please choose the
Page 71
71
correct option in Setup menu. You can also refer to Audio Settings in
Setup Menu chapter.
Repeat this procedure until the picture is correctly displayed on your
television.
Q: My Player is connected correctly to my television. I can no longer see
my media files in the browser or they are only partially listed in the
"Browser".
A: A special media filter is active if you press one of four buttons( as
ALL ,MUSIC,PHOTO,MOVIES )on the remote control. Only media files
that correspond to the active media filter are displayed on your
television.
If you select e.g. the media filter "Music ", no picture files are shown in
the browser. If you want to see all supported media files, please choose
the media filter "All ".
a) Unsupported format.
Your Player supports a great variety of media file formats, a detailed list
can be found at the end of these instructions. If you try to play a file that
uses an unsupported file format, a message will be displayed. If you
want to check the utilized audio and video format for a media file, you
can refer to “specification” chapter.
b) The chosen media source is not connected to the PLAYER
If you select a media source that is not currently connected to the Player,
such as a USB stick, this source will be displayed as empty. As soon as
a device is connected, the content appears in the respective path.
Page 72
72
If no folders or files are displayed for a resource connected via the
network, check the settings for your network and your network shares.
Please check the user name and password, if they are required for
accessing, and also the firewall settings of your computers.
Q:I want to copy files onto an external data storage device with my
Player, but I always get an error message.
A: To use the copy function of your Player, the device (or the partition),
that you want to copy the data onto, must be formatted with one of the
following file systems: FAT, FAT32, NTFS, ext3. Please use only targets
formatted with FAT, FAT32, NTFS or ext3 for copying onto.
Q:I want to perform a firmware update for my Player but my television
goes blank.
A: In some cases, the display via HDMI is not correct during a firmware
update.
Please make sure that your Player is also connected to your television
via the
composite video connection during the firmware update, not only via
HDMI, and select the composite video input as the active input of your
television.
Q:I want to access files with the Player that I have shared in my network.
My home network is working correctly, but the Player does not list the
files.
Page 73
73
A: If you do not have access to the shared files, please check the
following points:
1) Check if the network cable is connected properly at both sides, i.e. to
the Player
and to your network.
2) Make sure that the computer that you want to access is running and
not in a standby or idle mode.
3) Check the network and file sharing settings on your computer.
4) Check that you have entered the correct user name and password.
Please note that they are case sensitive.
5) Make sure that your firewall settings permit the Player to access your
computer.
6) If you want to access files that are stored on a USB data storage
device which is connected to a router and thus made available as
network storage, please note that you must set up a connection to the
drive using "My_Shortcuts ". To do so, you must enter the IP address of
your router as well as the user name and the password necessary to
access the network storage.
Q: How is it possible that the playback of a file from a shared folder in
the network is aborted?
A: The energy saving settings of the computer or the NAS interrupt the
connection.
If the energy saving settings of your computer or your NAS are active,
then they can go into an idle state or a sleep mode even though they are
Page 74
74
being accessed via the network. During a sleep mode no data is
transferred via the network. Please adjust the energy saving settings of
the media source so that it does not go into a sleep mode while you play
files via the network.
Q: Why is it possible that there are interruptions when playing movies
from my local network?
A: Sometimes, there are several devices in a network that have to share
the maximum data transfer rate possible via a network connection
(shared medium). If there are several connections active in the network
you use the Player in (e.g. to the internet, a shared printer, etc.), it is
possible that this lowers the data transfer rate available for the streaming
of the data to the Player to a level that is insufficient for the playback of
e.g. a DVD file or an HD movie file. Should you experience such
problems, please try to reduce the amount of data transferred by other
users of your network.
Q: While using the Player, it no longer responds to my commands.
A: This problem may have several causes. Please check the following
items:
1) Please aim the remote control in the direction of the Player so that
direct visual contact between these two devices exists and ensure that
the infrared receiver of the remote control and the Player are not
covered.
2) Check the battery in the remote control and, if necessary, replace it
Page 75
75
with a new one.
Q: I have connected the Player to my TV via HDMI and I want to change
the video output signal, but the video output resolution I want to use is
not available.
A: This problem may have several causes. Please check the following
items:
1).Your TV does not support all possible video output resolutions.
Go to the settings menu of your Player and select "HDMI Auto " under
the menu item "TV system ". Your Player will try to automatically select
the best possible video output resolution for your TV.
2).In some rare cases it is possible that not all options supported by the
TV are selectable. This problem can occur when the TV is switched on
from its standby mode, regardless of the current operating status of the
PLAYER
In order to be able to select all video output resolutions supported by
your TV, disconnect your Player from the power supply and reconnect it
after a few seconds. Now all available video output resolutions are
shown in the settings menu.
Q: Why can't I hear any sound on my television when I connect it via
HDMI?
A: This problem may have several causes. Please check the following
items:
An audio output format that is not supported by your television is
Page 76
76
selected.
The volume is to low / Mute is active.
3)Please select the correct digital output mode in the Setup Menu. Go to
the audio settings menu and select the menu entry "Digital-Audio -Out "
and choose the option "HDMI LPCM/RAW" if your television set does
not support real surround sound. You can also refer to the Audio
Settings.
Q: Why mustn't I disconnect the Player from the mains supply without
having switched it off beforehand?
A: The loading or saving of the current system settings takes approx. 10
seconds when the Player is turned on or off. If the player is disconnected
from the mains supply without having been switched off beforehand,
settings and data may be lost. Please always switch off the Player by
pressing the power button on the device or on the remote control and
wait until the power button on the Player lights up red.
Q: After the player is connected to the Internet ,Why can’t I browse some
video or news ?
A: This problem may have several causes. Please check the following
items:
1.Some network function can not be used in the home (eg, YouTube
video, cnn news ,bbc news and so on),the details please refer to the
local network .
2. Please restart the product it you can not search the wireless IP
address.
Page 77
77
Others
The accessories of products may be different, for this series products
are various according to different series and models.
Please refer to packing list or contact your agent for information.
Pleas understand no advance notice for further product improvement,
outlook design and specification update.
The illustration may be a little different from the real product.
Statement1: Manufactured under license from Dolby
laboratories “Dolby” and the double-D
symbol are trademarks of Dolby laboratories
Page 78
78
Statement2:Manufactured under license under U.S.
Patent#’s:5,451,942;5,956,674;5,974,380;5,978,762;6,48
7,535 & other U.S. and worldwide patents issued &
pending.DTS and the Symbol are registered trademarks,
&DTS 2.0+ Digital Out and the DTS logos are trademarks
of DTS,lnc. Product includes software. ©DTS,lnc.All
Rights Reserved.
Loading...