Dsc LCD-5501Z User Manual

Using the LCD5501Z Keypad

WARNING: Please refer to the System Instruction Manual for information on limitations regarding product use and

function and information on the limitations as to liability of the manufacturer.

1. Display

2. System Lights

3. Number Pad

4. Function Buttons

5. Emergency Keys

1. Display

2. System Lights:

Ready Light

If the Ready light is ON, the system is ready for arming. The system cannot be armed unless the Ready light is ON.

Armed Light

If the Armed light is ON, the system has been armed successfully.

Trouble Light

If the Trouble light is ON, press to view the troubles. The keypad will indicate the troubles using numbers 1-8 at the top of the keypad display. See “Identifying Trouble Conditions” in your system’s

Instruction Manual

The LCD5501Z keypad shows the status of your security system using an LCD-style display, along with fixed words and numbers.

This instruction sheet describes the basic features of the keypad. For more detailed information on your security system and how to use it, please read your system’s

Instruction Manual

Important Note: Test system weekly and have any system trouble conditions corrected by y our alarm installer.

3. Number P ad:

Use the number pad to enter your code, and to access system functions. To exit a function and return to the Ready state, press function press

. To select a

5. Function Buttons:

If your installer has enabled them

function buttons to access the stay arm, away arm, door chime, sensor reset and quick exit features. (Your installer may program other functions for these buttons.) Press and hold the appropriate button for two seconds. Refer to your

Manual

for more information on these features.

, you can use the

Instruction

4. Emergency Keys:

Press both * keys for two seconds to send a FIRE message. Press both send an AUXILIARY message. Press both * Keys for two seconds to send a PANIC message.

* IMPORT ANT NO TE (All Keypads): The Fire, Auxiliary and Panic keys will NO T function unless programmed by the installer. If these keys are in service and the installer has enabled audible feedback, holding down the key for two seconds will cause the keypad sounder to beep indicating that the input has been accepted and sent.

* Keys for two seconds to

Using the LCD5501Z Keypad

The LCD5501Z works similarly to the other keypads described in your system’s

Manual

functions, see your system’s

. For more information on individual

Instruction Manual

Instruction

light will be off. To see the numbers of the open zones, press

. Before you try to arm your system, go to the open zones and close all doors and windows, and make sure no one is present in zones

with motion detectors.

Viewing Open Zones

Before you can arm your system, all the zones must be closed. If some zones are currently open, the keypad will display “Open”, and the Ready

Viewing Zones in Alarm

If there is an alarm on your system the keypad will display “Alarm” and will scroll the numbers of the zones affected.

System Functions - Quick Reference

The following chart lists the basic functions of your system and the keys to press for each function.

NOTE: Some functions may not be available on your system. Ask your installer for more information.

To do this: Press this:

Arm system (Away): ............................................... [access code], leave through entry/exit door

OR press

Arm system (Quick): ..............................................

Arm system (Stay):................................................. [access code], do not exit premises

Arm system (No Entry Delay): ...............................

Bypass zones: .......................................................

Disarm system: ...................................................... [access code]

Exit premises when system armed: ....................... OR press (if enabled)

Reset smoke detectors: .........................................

Program access codes.......................................... refer to “Programming Access Codes” in

Send Fire message: ............................................... (press and hold for two seconds, if enabled)

Send Auxiliary message: .......................................

Send Panic message: ............................................

Set system time and date: .....................................

Silence fire alarm: ..................................................

Silence intrusion alarm: ......................................... [access code]

Turn auto-arm on/off:..............................................

Turn door chime on/off: .......................................... to toggle on or off OR press (if enabled)

Turn on bypassed zones (if Stay armed):..............

View alarm memory: ..............................................

View troubles: ........................................................ (Troubles indicated by numbers 1-8 on top of keypad

(from Ready state)

OR press

[access code] [two-digit zone number(s)], to exit

OR press (if enabled)

[master code] , enter current time (24hr format: 00:0023:59) and date (month/day/year) as 10 digits: [hh:mm MMDDYY]

[master code]

display. See “Viewing Trouble Conditions” in for list of trouble definitions)

(if enabled)

Instruction Manual

(press and hold for two seconds, if enabled)

Instruction Manual

29004451 R001