Drolet VISION XL Operation And Installation Instructions Manual

"VISION XL"
ZERO CLEARANCE

DROLET STOVES AND FIREPLACES INC.

A-45033

REV. 09/96

_____________________________________________________________________________

DROLET “VISION XL” zero clearance fireplace

OPERATION AND INSTALLATION INSTRUCTIONS

• Read instructions before assembling and keep for future reference.

• Consult local authorities for special standards applicable for the necessary licenses.

• Install as instructed by the manufacturer and in compliance with the National Building Code.

INCLUDED WITH UNIT:

1 - Insulated fireplace
6 - Refractory stones for combustion chamber
2 - Air circulating grills
8 - Metal screws
8 - Wood screws no. 8, 1 1/2” (38 mm) round head
1 - Extensible and flexible insulated air duct (8” diam.)
4 - Tight straps with #8 screws, 1 1/4” long.
2 - Galvanized steel increaser 3” to 4”
1 - Galvanized steel protective shield 11” x 36” to be installed under the fireplace.

BUY YOUR CHIMNEY KIT AS FOLLOWING:

• Chimney anchor plate

• Chimney lengths

• Insulated elbows when necessary

• Vented flashing

• Rain cap

• Joist and rafter radiation shields

• Chimney support

OPTIONAL PART

• Fireplace screen

• Air inlet kit (insulated 4” diam. duct and one grill)

• Exterior air inlet grill, 4” diam.

• Additional air circulating duct kit (8” diam.)

1

INSTALLATION OF UNIT

• Locate your unit in the room.

• The fireplace can be installed directly on the floor or raised on a combustible structure.

(plan 1)

2

(plan 2)

3

(plan of the pipe)

4