Drive Aluminium Triwalker Steel Triwalker Owner's Handbook Manual

Triwalker Owner’s Handbook (Z25987 Rev A) Page 1 of 12

LIGHTWEIGHT TRIWALKER

OWNER’S HANDBOOK

Triwalker Owner’s Handbook (Z25987 Rev A) Page 2 of 12

CONTENTS

1. Contents

2. Introduction

3. Parts Description

4. Personal Safety

5. Adjustments for Comfort

6. Transportation & Assembly

7. Care and Maintenance

8. Brake Operation

9. Assembling the Walker

10. Specification

11. Warranty

INTRODUCTION

The Drive Medical Lightweight Triwalker is suitable for everyday
indoor and outdoor use, and is portable whilst offering stability
and security to the user. It is available with either a lightweight
aluminium or sturdy steel frame.

All Drive Medical walkers are manufactured to the highest
quality standards and are CE marked as Medical Devices.

The walker range provides a robust and visually appealing
product whilst being a cost-effective solution to some mobility
problems.

The walker comes with 7” (18cm) diameter wheels with solid
grey tyres, and features arthritic friendly loop lock cable brakes.

Triwalker Owner’s Handbook (Z25987 Rev A) Page 3 of 12

PARTS DESCRIPTION

CABLE BRAKE

MECHANISM

FR. CASTOR

WHEEL

FOLDING

MECHANISM

HANDLEBAR

TIGHTENING

HANDLE

BRAKE LEVER

The diagram
(left) shows
the three­wheel
triwalker with
arthritic
friendly
cable
brakes.

Triwalker Owner’s Handbook (Z25987 Rev A) Page 4 of 12

PERSONAL SAFETY

• For your health and comfort, make sure that you adopt a
comfortable posture and that you can operate the braking
mechanism with ease. Ensure that the handles are at equal
heights and securely locked in position.

• Ensure the walker is always fully folded out and locked in
position before using.

• Ensure that all the wheels are stable and are on the ground
before using.

• Ensure that the braking mechanism is adequate and test
before using.

• Ensure that the latest health and safety practice is used for
carrying and lifting items, such as wheeled walkers.

ADJUSTMENTS FOR COMFORT

To adjust the height of all walkers, unscrew the tightening
handles at either side of the walker anticlockwise to remove.
Adjust the height of the walker to suit the user and then reinsert.

Tighten by turning the tightening handles clockwise to secure
(as shown in the photo overleaf). Ensure that the tightening
handles are on the outside of the rollator / triwalker.