Drive 15005L Owner's Manual And Assembly Instructions
Drive Full Electric Low Height Bed
Model # 15005L
Owner’s Manual and Assembly Instructions
This manual must be given to the Owner/User
of this bed and should be read carefully before
putting this product into use. Keep manual in
an accessible location for future reference.
Click here to view detailed product information and pricing. Call 800-397-5899 to order today!
TABLE OF CONTENTS
Packaging and Handling ........................................................................................................................ 1
Unpacking .......................................................................................................................................... 1
Inspection ........................................................................................................................................... 1
Storage .............................................................................................................................................. 1
Assembly Instructions ........................................................................................................................... 2
Operation ................................................................................................................................................. 6
Hand Control ...................................................................................................................................... 6
Caster Lock and Floor Lock Feature .................................................................................................. 6
Bed Rail Installation ............................................................................................................................... 7
Mattress Retainer Adjustment ............................................................................................................... 8
Manual Hi/Lo Adjustment Crank ........................................................................................................... 8
Maintenance & Safety Checks............................................................................................................... 9
Warnings ............................................................................................................................................... 10
NOTE: DO NOT operate this product without rst reading and understanding this user manual. Damage or
injury may result from improper use of this product.
Packaging / Handling
Unpacking
1. Check cartons for any obvious damage to packaging or contents. If damage is evident,
contact your local Drive Medical dealer/provider.
2. Remove any lose packaging from the cartons.
3. Carefully remove all components from the cartons.
The Two Cartons will contain the following components:
#15215 HeadSpring and Head Board w/casters
#15216 Foot Spring and Foot Board w/ junction box, 3 motor/actuators,
Hand Pendant Control, Emergency Crank Handle.
Inspection
1. Examine each component carefully for damage, scratches, dents or any other visual damage.
2. Carefully remove Tie Wraps holding power cord, hand pendant and drive shaft.
3. Inspect power cord and plug for cuts or damage.
4. Inspect the junction box and motors for damage, loose connections, cuts or damage to the wires.
5. Ensure motor connections to junction box are connected correctly and secure.
Storage
1. If the bed is not assembled immediately, retain cartons and packaging for storage until assembly is
completed.
2. Store the packaged bed in a dry area.
3. DO NOT place other objects on top of the packaged bed cartons.
1
Assembly Instructions
1 Conrm that all parts are present:
A. Foot Spring w/
• 3 motor/actuators
• Junction Box
• Hand Pendant
• Power cord & plug
B. Head Spring
C. Low Height Head Board
D. Low Height Foot Board
E. Hi/Low Drive Shaft
F. Locking Pins (2)
G. Hand Crank
H. Casters (4) – 2 locking, 2 non-locking
I. Head/Foot Pull Tube Transport Straps
A B
I
D
C
I
E
G
F
H
Caution: DO NOT attempt to operate bed controls until completion of assembly as damage to bed
components and/or personal injury may occur.
2
Assembly Instructions (Continued)
2. With the Head and Foot Spring positioned upright, connect Head Spring by aligning with foot spring and
swinging both ends away from each other.
3. Optional: Insert lock pin through connected sleep surface and secure with spring clip.
4. Connect Head Spring and Foot Spring Pull Tube to provide the up/down motion/adjustment of the Head
and Foot Spring Sections:
A. Extend the Head Spring Pull Tube and connect to the Head Spring Lift Arm. Secure in place with the
tethered locking pin and clip
B. Extend the Foot Spring Pull Tube and connect to the Foot Spring Lift Arm.
Secure in place with the tethered locking pin and clip
3
Assembly Instructions Cont.
5. Install the casters by inserting the stem of the
caster into the leg receptacle. It is recommended
to install one locking caster and one non-locking
caster on each bed end. The locking casters
should be installed diagonally from each other.
The 15005L Low Height bed gives you the option of
installing the casters on the inboard non adjustable
legs or the outboard adjustable legs. To achieve
the full low height feature, install the casters on the
inboard non-adjustable legs.
StemLeg Receptacle
6. Carefully lower the bed frame at onto the oor. Attach the Head
and Foot Boards by tilting the Boards toward your body and aligning
mounting pins located on the Spring Sections with the Hooks on the
Head/Foot Boards.
NOTE: The Head Board is taller than the Foot Board, however, they
are interchangeable with each other.
7. Assemble Hi/Lo Drive Shaft and adjust to the proper length so it will
t between the Head Board drive pin and Hi/Lo Motor drive pin at the
foot end.
• Lift the Head Spring and install the foot end of the Hi/Lo Drive Shaft to the Hi/Lo Motor drive pin, then
install head end of the Hi/Lo Drive Shaft to the Head Board drive pin.
• Hi/Lo Drive Shaft is spring loaded so it will t securely between these two points.
• Adjust length of Hi/Lo Drive Shaft if it is too long or too short.
4
Loading...