DrayTek VigorPro 5510 Quick Install Guide

Download

VigorPro 5510 Quick Start Guide

VigorPro 5510 Series

Unified Threat Management

Quick Start Guide

For

Anti-Virus

Anti-Intrusion

Anti-Spam

Service

Version: 2.0

Date: 2009/04/01

Please visit www.draytek.com to get the newly updated manual at any time.

VigorPro 5510 Quick Start Guide

Trademarks

Copyright 2009 All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The scope of delivery and other details are subject to change without prior notice.

The following trademarks are used in this document:

z Microsoft is a registered trademark of Microsoft Corp. z Windows, Windows 95, 98, Me, NT, 2000, XP and Explorer are

trademarks of Microsoft Corp.

z Apple and Mac OS are registered trademarks of Apple Inc. z Other products may be trademarks or registered trademarks of their

respective manufacturers.

Safety Instructions and Approval

Safety Instructions

Warranty

z Read the installation guide thoroughly before you set up the router. z The router is a complicated electronic unit that may be repaired only be

authorized and qualified personnel. Do not try to open or repair the router yourself.

z Do not place the router in a damp or humid place, e.g. a bathroom. z The router should be used in a sheltered area, within a temperature range

of +5 to +40 Celsius.

z Do not expose the router to direct sunlight or other heat sources. The

housing and electronic components may be damaged by direct sunlight or heat sources.

z Do not deploy the cable for LAN connection outdoor to prevent electronic

shock hazards.

z Keep the package out of reach of children. z When you want to dispose of the router, please follow local regulations on

conservation of the environment. We warrant to the original end user (purchaser) that the router will be free from any defects in workmanship or materials for a period of two (2) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair or replace the defective products or components, without charge for either parts or labor, to whatever extent we deem necessary tore-store the product to pro per o perating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not cover the bundled or licensed software of other vendors. Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve the right to revise the manual and online documentation and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

Be a Registered Owner

Firmware & Tools Updates

VigorPro 5510 Quick Start Guide

Web registration is preferred. You can register your Vigor router via http://www.draytek.com.

Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents.

http://www.draytek.com Parts of the anti-virus features are powered by Kaspersky Lab ZAO. For more

detailed information, please refer to http://www.kaspersky.com.

iii

European Community Declarations

Manufacturer: DrayTek Corp.

Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303

Product: VigorPro 5510 Series DrayTek Corp. declares that VigorPro 5510 Series is in compliance with the following essential

requirements and other relevant provisions of R&TTE Directive 1999/5/EEC. The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive

89/336/EEC by complying with the requirements set forth in EN55022/Class A and EN55024/Class A. The product conforms to the requirements of Low Voltage (LVD) Directive 73/23/EEC by complying with

the requirements set forth in EN60950.

Regulatory Information

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the use is encouraged to try to correct the interference by one of the following measures:

z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different form that to which the receiver is

connected.

z Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device may accept any interference received, including interference that may cause undesired

operation.

Taiwanese BSMI (Bureau of Standards, Metrology and Inspection) A Warning:

Warning: This device might cause interference of radio frequency under the environment of dwelling. In such condition, the users might be asked to adopt some proper strategies.

Please visit http://www.draytek.com/user/AboutRegulatory.php.

This product is designed for the ISDN and 2.4GHz WLAN network throughout the EC region and Switzerland with restrictions in France. Please see the user manual for the applicable networks on your product.

VigorPro 5510 Quick Start Guide

TTaabbllee ooff CCoonntteennttss

1. Introduction........................................................................................................... 1

1.1 Panel Explanation ......................................................................................................................2

1.1.1 For VigorPro 5510.......................................................................................................... 2

1.1.2 For VigorPro 5510Gi.......................................................................................................4

1.2 Package Content........................................................................................................................ 6

2. Installing Your Vigor Router................................................................................. 7

2.1 Hardware Installation..................................................................................................................7

2.2 Printer Installation....................................................................................................................... 8

3. Configuring Web Pages..................................................................................... 13

3.1 Quick Start Wizard.................................................................................................................... 13

3.2 Service Activation Wizard.........................................................................................................16

4. Registration for the Router................................................................................ 19

4.1 Creating and Activating an Account from VigorPro Website....................................................19

4.2 Creating and Activating an Account from Router Web Configurator........................................ 23

4.3 Registering Your Vigor Router..................................................................................................28

4.4 Activating Anti-Virus/Anti-Intrusion/Anti-Sp am Service............................................................ 31

4.4.1 For Anti-Virus and Anti-Intrusion Service.....................................................................31

4.4.2 For Anti-Spam Service ................................................................................................. 36

4.5 Backup and Upgrade Signature for Anti-Intrusion/Anti-Virus.................................................................. 40

4.6 Enabling Anti-Virus/Anti-Intrusion............................................................................................. 41

5. T rouble Shooting................................................................................................ 43

5.1 Checking If the Hardware Status Is OK or Not......................................................................... 43

5.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ...................... 43

5.3 Pinging the Router from Your Computer..................................................................................46

5.4 Checking If the ISP Settings are OK or Not.............................................................................47

5.5 Backing to Factory Default Setting If Necessary...................................................................... 49

5.6 Contacting Your Dealer ............................................................................................................50

VigorPro 5510 Quick Start Guide

11.. IInnttrroodduuccttiioonn

VigorPro 5510 Series is an all-in-one Anti-Virus and Anti-Intrusion security appliance for SOHO and branch office. VigorPro 5510 Series provides real-time network protection against viruses, worms and malicious programs via e-mail, FTP and web browser. The rule-based website content filtering blocks improper connection to internet in flexible way. With DrayTek’s DrayOS™ as kernel, VigorPro 5510 Series provides robust and stable VPN, firewall and routing functionality as well.

Unlike legacy proxy-based anti-virus anti-intrusion solution, which stores data in files format prior to scan the content in streaming, the VigorPro 5510 equips with hardware-based scan engine. VigorPro 5510 Series scans packet stream go through it in real-time before those specious content get into the network without performance downgrade. Thus provides a protection of whole network against any intrusion and malicious program in real-time.

DrayTek provides customer free access to the latest virus/hacker signature for and information update for a period of time. Considering customer’s needs to minimize supporting effort, DrayTek support team also provides service for VigorPro 5510 Series to get the latest signature updated from DrayTek’s server automatically. The all-in-one design makes network management simple and easy.

FFeeaattuurreess ffoorr VViiggoorrPPrroo 55551100 SSeerriieess

y Easy Internet-sharing of your broadband connection y Unified Security Firewall to help protect your network from external viruses and intrusions y Real-time virus/intrusion signature scanning with hardware-based scan engine to protect

your network

VigorPro 5510 Quick Start Guide

11..11 PPaanneell EExxppllaannaattiioonn

11..11..11 FFoorr VViiggoorrPPrroo 55551100

LED Status Explanation

Blinking The ro ut er is powe red on and running normally. ACT (Activity) Off The router is powered off.

IDP (Intrusion Detection and Prevention)

Virus On

DMZ On DMZ Host is specified in certain site.

Monitor On LAN traffic monitor is active. CSM

On (Yellow)

(Yellow)

On A USB device is connected and active. USB Blinking The data is transmitting.

On The profile(s) for IM/P2P, Web Content Filter,

Off No IM/P2P, Web Content Filter, and/or URL

The anti-intrusion function is enabled.

The anti-virus function is enabled.

and/or URL Content Filter application has been activated. (It is enabled from Firewall >> General Setup).

Content Filter application has been activated.

LED on Connector

On The port is connected with 10Mbps. Off The port is disconnected. Blinking The data is transmitting. On The port is connected with 100Mbps. Off The port is disconnected. Blinking The data is transmitting. On The port is connected with 100Mbps. Off The port is disconnected. Blinking The data is transmitting. On The port is connected with 1000Mbps. Off The port is disconnected. Blinking The data is transmitting.

WAN

LAN/Monitor LAN

10 (left LED)

100 (right LED)

100 (left LED)

1000 (right LED)

Interface Description

RST (Factory Reset)

WAN(1/2) Connecter for remote networked devices. LAN/Monitor Connecter for local networked devices.

Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration.

VigorPro 5510 Quick Start Guide

LAN (1-4) Connecter for local networked devices. USB Connecter for a USB device.

Connecter for a power cord with 100-240VAC (inlet). Power Switch. “1” is ON; “0” is OFF.

VigorPro 5510 Quick Start Guide

11..11..22 FFoorr VViiggoorrPPrroo 55551100GGii

LED Status Explanation

Blinking The ro ut er is powe red on and running normally. ACT (Activity) Off The router is powered off.

IDP (Intrusion Detection and Prevention)

Virus On

DMZ On DMZ Host is specified in certain site.

WLAN

Monitor On LAN traffic monitor is active. CSM

ISDN

On (Yellow)

(Yellow)

On A USB device is connected and active. USB Blinking The data is transmitting. On Wireless access point is ready. Blinking Ethernet packets are transmitting over wireless LAN. Off The WLAN function is inactive.

On The profile of CSM (Content Security

Off No IM/P2P, Web Content Filter, and/or URL

On The ISDN service function is active. Blinking A successful connection on the ISDN BRI B1/B2

The anti-intrusion function is enabled.

The anti-virus function is enabled.

Management) for IM/P2P application is active. (It is enabled from Objects Setting >> CSM Profile).

Content Filter application has been activated.

channel.

LED on Connector

WAN

LAN/Monitor LAN

10 (left LED)

100 (right LED)

100 (left LED)

1000 (right LED)

Interface Description

RST (Factory Reset)

VigorPro 5510 Quick Start Guide

ISDN Connecter for ISDN line. WAN(1/2) Connecter for remote networked devices. LAN/Monitor Connecter for local networked devices. LAN (1-4) Connecter for local networked devices. USB Connecter for a USB device.

Connecter for a power cord with 100-240VAC (inlet). Power Switch. “1” is ON; “0” is OFF.

VigorPro 5510 Quick Start Guide

11..22 PPaacckkaaggee CCoonntteenntt

nQuick Start Guide

RJ-45 Cable (Ethernet)

The type of the power cord depends on the country that the router will be installed:

oCD p Antenna for G models

r RJ-45 to RJ-45 Cable

for i models

UK-type power cord

USA/Taiwan-type power cord

* The maximum power consumption is 12-15 Watt.

EU-type power cord

AU/NZ-type power cord

VigorPro 5510 Quick Start Guide

22.. IInnssttaalllliinngg YYoouurr VViiggoorr RRoouutteerr

22..11 HHaarrddwwaarree IInnssttaallllaattiioonn

This section will guide you to install the router through hardware connection and configure the router’s settings through web browser.

Before starting to configure the router, you have to connect your devices correctly.

1. Connect a cable Modem/DSL Modem/Media Converter (depends on your requirement) to

any WAN port of router with Ethernet cable (RJ-45). The WAN1/WAN2 LED (Left or Right) will light up according to the speed (100 or 10) of the device that it connected.

2. Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of the router and the

other end of the cable (RJ-45) into the Ethernet port on your computer. The LAN LED (Left or Right) will light up according to the speed (100 or 10) of the device that it connected.

3. Connect the printer to the router with the USB cable if required.

4. Connect one end of the power adapter to the router’s power port on the rear panel, and the

other side into a wall outlet.

5. Power on the device by pressing down the power switch on the rear panel.

6. The system starts to initiate. After completing the system test, the ACT LED will light up

and start blinking.

(For the detailed information of LED status, please refer to section 1.1.)

VigorPro 5510 Quick Start Guide

22..22 PPrriinntteerr IInnssttaallllaattiioonn

You can install a printer onto the router for sharing printing. All the PCs connected this router can print documents via the router. The example provided here is made based on Windows XP/2000. For Windows 98/SE/Vista, please visit www.draytek.com

Before using it, please follow the steps below to configure settings for connected computers (or wireless clients).

1. Connect the printer with the router through USB/parallel port.

2. Open Start->Settings-> Printer and Faxes.

VigorPro 5510 Quick Start Guide

3. Open File->Add a New Computer. A welcome dialog will appear. Please click Next.

4. Click Local printer attached to this computer and click Next.

5. In this dialog, choose Create a new port Type of port and use the drop down list to select

Standard TCP/IP Port. Click Next.

VigorPro 5510 Quick Start Guide

6. In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name or

IP Address and type IP_192.168.1.1 as the port name. Then, click Next.

7. Click Standard and choose Generic Network Card.

8. Then, in the following dialog, click Finish.

VigorPro 5510 Quick Start Guide

9. Now, your system will ask you to choose right name of the printer that you installed onto the

router. Such step can make correct driver loaded onto your PC. When you finish the selection, click Next.

10. For the final stage, you need to go back to Control Panel-> Printers and edit the property

of the new printer you have added.

11. Select "LPR" on Protocol, type p1 (number 1) as Queue Name. Then click OK. Next please

refer to the red rectangle for choosing the correct protocol and UPR name.

VigorPro 5510 Quick Start Guide

The printer can be used for printing now. Most of the printers with different manufacturers are compatible with vigor router.

Note 1: Some printers with the fax/scanning or other additional functions are not supported. If you do not know whether your printer is supported or not, please visit www.draytek.com to find out the printer list. Open Support >FAQ; find out the link of Printer Server and click it; then click the What types of printers are compatible with Vigor router? link.

Note 2: Vigor router supports printing request from computers via LAN ports but not WAN port.

VigorPro 5510 Quick Start Guide

33.. CCoonnffiigguurriinngg WWeebb PPaaggeess

33..11 QQuuiicckk SSttaarrtt WWiizzaarrdd

The Quick Start Wizard is designed for you to easily set up your router for Internet access. You can directly access the Quick Start Wizard via Web Configurator.

1. Make sure your PC connects to the router correctly.

Notice: You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the default IP address of Vigor router 192.168.1.1. For the detailed information, please refer to the later section - Trouble Shooting of the guide.

2. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to

ask for username and password. Please type “admin” as the username and leave blank for the password on the window. Next click OK for next screen.

Notice: If you fail to access to the web configuration, please go to “Trouble

Shooting” for detecting and solving your problem.

3. Now, the Main Screen will pop up. Click Quick Start Wizard.

Note: The home page will change slightly in accordance with the router you have.

VigorPro 5510 Quick Start Guide

4. Enter the login password on the field of New Password and retype it on the field of

Confirm Password. Then click Next to continue.

5. On the next page as shown below, please select the WAN interface that you use. Choose

Auto negotiation as the physical type for your router. Then click Next for next step.

6. On the next page as shown below, please select the appropriate Internet access type

according to the information from your ISP. For example, you should select PPPoE mode if the ISP provides you PPPoE interface. Then click Next for next step.

VigorPro 5510 Quick Start Guide

PPPoE: if you click PPPoE as the protocol, please manually enter the Username/Password provided by your ISP. Then click Next.

PPTP: if you click PPTP, you will get the following page. Please type in all the information originally provided by your ISP. Then click Next for next step.

Static IP: if you click Static IP, you will get the following page. Please type in all the information originally provided by your ISP. Then click Next for next step.

VigorPro 5510 Quick Start Guide

DHCP: if you click DHCP, you will get the following page. Please type in all the information originally provided by your ISP. Then click Next for next step.

7. Now you can see the following screen. It indicates that the setup is complete. Different types

of connection modes will have different summary. Click Finish and then restart the router. Afterward, you will enjoy surfing on the Internet.

33..22 SSeerrvviiccee AAccttiivvaattiioonn WWiizzaarrdd

1. Open Service Activation Wizard.

2. The screen of Service Activation Wizard will be shown as follows. Choose the one you

need and click Next. In this case, we choose to activate free trail edition.

VigorPro 5510 Quick Start Guide

Free trial: if it is the first time that you register the service, please use the option. Formal edition with license key: you can extend the license valid time manually.

3. In the following page, you can activate the AV/AI, AS and/or Web content filter service at

the same time or individually. When you finish the selection, please click Next.

4. Now, the web page will display the service(s) that you want to activate according to your

selection. The free trial of AV(DT-DT) is three years; Anti-spam is one month; and the Web content filter is one year (till 2009/12/31).

5. Check the service status in the Defense configuration >>Activation.

VigorPro 5510 Quick Start Guide

If you need to extend the license valid time, you can also use the Service Activation Wizard again to reach your goal by clicking the radio button of Formal edition with license key.

VigorPro 5510 Quick Start Guide

44.. RReeggiissttrraattiioonn ffoorr tthhee RRoouutteerr

Now you can surf on Internet freely. It is time to continue the registration and activation of your router for using the functions of anti-intrusion, anti-virus and anti-spam.

To use the anti-intrusion, anti-virus and anti-spam features of VigorPro series router, you have to create a new account, finish the registration for that account by using the router and complete the registration for the Vigor router. After finishing the registration of the router, you can download the newly update types and rules of anti-intrusion and anti-virus during the valid time of the license key you purchased.

There are two ways to create and activate new account. One is created by accessing www.vigorpro.com (refer to section 4.1), the other is from router’s web configurator (refer to section 4.2).

After activating the new account, you have to register your router from router’s web configurator (refer to section 4.3). Follow the steps listed below to finish the registration and activation.

44..11 CCrreeaattiinngg aanndd AAccttiivvaattiinngg aann AAccccoouunntt ffrroomm VViiggoorrPPr WWeebbssiittee

To activate anti-virus/anti-intrusion/anti-spam function, you need to register an account on www.vigorpro.com firstly. Please follow the steps below to create a new account.

roo

1. Open your browser with URL: www.vigorpro.com. Find the line of Not registered yet?.

Then, click the link Click here! to access into next page.

VigorPro 5510 Quick Start Guide

2. Check to confirm that you accept the Agreement and click Accept.

3. Type your personal information in this page and then click Continue.

VigorPro 5510 Quick Start Guide

4. Choose proper selection for your computer and click Continue.

5. Now you have created an account successfully.

6. Check to see the confirmation email with the title of

from www.vigorpro.com.

VigorPro 5510 Quick Start Guide

New Account Confirmation Letter

7. Click the Activate my Account link to enable the account that you created. The following

screen will be shown to verify the register process is finished. Please click Login.

8. When you see the following page, please type in the account and password (that you just

created) in the fields of UserName and Password. Then type the code in the box of AuthCode according to the value displayed on the right side of it.

9. Now, click Login. Your account has been activated.

VigorPro 5510 Quick Start Guide

44..22 CCrreeaattiinngg aanndd AAccttiivvaattiinngg aann AAccccoouunntt ffrroomm RRoouutteerr CCoonnffiigguurraattoorr

You, also can created and register a new account from the web configurator of the VigorPro router.

1. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to

ask for username and password. Do not type any word on the window and click OK.

2. From the router’s web page, please open Defense Configuration >>Activation. You will

see the following web page.

WWeebb

3. Click the Activate link from the Activation web page.

VigorPro 5510 Quick Start Guide

4. A Re-login page will be shown on the screen.

5. Locate and click Create an account now link on the bottom of this page. You will access

into the following page. Check the box below to confirm that you accept the Agreement and click Accept.

VigorPro 5510 Quick Start Guide

6. Type your personal information in this page and then click Continue.

7. Choose proper selection for your computer and click Continue.

VigorPro 5510 Quick Start Guide

8. Now you have created an account successfully.

9. Check to see the confirmation email with the title of New Account Confirmation Letter

from www.vigorpro.com.

10. Click the Activate my Account link to enable the account that you created. The following

screen will be shown to verify the register process is finished. Please click Login.

VigorPro 5510 Quick Start Guide

11. When you see the following page, please type in the account and password (that you just

created) in the fields of UserName and Password. Then type the code in the box of AuthCode according to the value displayed on the right side of it.

12. Now, click Login. Your account has been activated. And the following page will be shown

automatically.



DrayTek will maintain a database of MAC address/serial number of shipped goods. Only products with shipping records can be registered. If your VigorPro 5510 cannot hook up to your account, please contact your reseller or DrayTek’s technical support.

VigorPro 5510 Quick Start Guide

44..33 RReeggiisstteerriinngg YYoouurr VViiggoorr RRoouutteerr

You have activated the new account for the router. Now, it is the time for you to register your vigor router. Open Defense Configuration >>Activation. Registering Vigor router should be done just for once. If the router has been registered previously, the system will not allow you to register the router again. After finishing the router registration, you can activate Anti-Virus and Anti-Intrusion.

1. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to

ask for username and password.

2. From the router’s web page, please open Defense Configuration >>Activation. You will

see the following web page.

3. Click the Activate link from the Activation web page.

VigorPro 5510 Quick Start Guide

4. A Re-login page will be shown on the screen. Please type the account and password that you

created previously. And click Login.

5. The following page will be displayed after you logging in VigorPro server. From this page,

please click Add.

VigorPro 5510 Quick Start Guide

6. When the following page appears, please type in Nick Name (for the router) and choose the

right purchase date from the popup calendar (it appears when you click on the box of Purchase Date).

7. After adding the basic information for the router, please click Submit.

8. Now, your router information has been added to the database. Click OK to leave this web

page and return to My Product web page.

Now, you have finished the procedure for registering your router.

VigorPro 5510 Quick Start Guide

44..44 AAccttiivvaattiinngg AAnnttii--VViirruuss//AAnnttii--IInnttrruussiioonn//AAnnttii--SSppaamm

After registering your vigor router, you have to follow the steps listed below to activate anti-virus/anti-intrusion service to obtain full security for your computer.

44..44..11 FFoorr AAnnttii--VViirruuss aanndd AAnnttii--IInnttrruussiioonn SSeerrvviiccee

1. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to

ask for username and password.

2. From the router’s web page, please open Defense Configuration >>Activate. You will see

the following web page.

SSeerrvviiccee

3. Click the Activate link to activate Anti-Intrusion/Anti-Virus service.

VigorPro 5510 Quick Start Guide

4. A Re-login page will be shown on the screen. Please type the account and password that you

created previously. And click Login.

5. On the web page of My Product, you can find a list of the devices that you add with the

above steps. Currently, you just have added VigorPro 5510. Please click the serial number link.

VigorPro 5510 Quick Start Guide

6. From the Device’s Service section, click the Trial button for AI-AV (Anti-Intrusion &

Anti-Virus) service with provider DT-DT.

Rename It allows you to change the account name. Delete It allows you to delete account name used currently. Transfer It allows you to transfer the VigorPro device together with applied

license to someone who has already registered another account in

www.vigorpro.com. Be sure to press this button to transfer the

product to whom you want to give. Otherwise he/she might not

be able to maintain the license hooked up to the VigorPro device.

Back It allows you to return to the previous account.

VigorPro 5510 Quick Start Guide

7. In the following page, check the box of “I have read and accept the above Agreement”.

The system will find out the date for you to activate this version of service. Then, click

Next.

Note: DT-DT means you can acquire the anti-intrusion and anti-virus services from

DrayTek Corporation.

8. When this page appears, click Register.

9. Next, the DrayTek Service Activation screen will be shown as the following:

(Above figure supposes you have not activated Anti-Spam yet.)

VigorPro 5510 Quick Start Guide

10. Click Close.

11. Open Defense Configuration>>Activation page of the router’s web configurator. The start

date and expire date for the license are shown in this page.

12. Click Activate to access into VigorPro website again. Open the following page. You will

see the AI-AV (with provider DT-DT) has been activated and in use.

Now, you have finished Anti-Intrusion/Anti-Virus configuration.

VigorPro 5510 Quick Start Guide

44..44..22 FFoorr AAnnttii--SSppaamm SSeerrvviiccee

Please follow the steps below to activate Anti-Spam Service for your system.

GGeettttiinngg 3300 DDaayyss ooff FFrreeee CChhaarrggee

1. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to

ask for username and password.

2. From the router’s web page, please open Defense Configuration >>Activation. You will

see the following web page.

3. Click the Activate link from Anti-Spam License to activate Anti-Spam service.

VigorPro 5510 Quick Start Guide

4. A Re-login page will be shown on the screen. Please type the account and password that you

created previously. And click Login.

5. On the web page of My Product, you can find a list of the devices that you add with the

above steps. Currently, you just have added VigorPro 5510. Please click the serial number link.

VigorPro 5510 Quick Start Guide

6. From the Device’s Service section, click the Trial button for AS (Anti-Spam) service.

In this page, check the box of “I have read and accept the above Agreement”. The system will find out the date for you to activate this version of service. Then, click Next.

Note: CTCH means you can acquire anti-spam service from Commtouch.

VigorPro 5510 Quick Start Guide

7. When this page appears, click Register.

8. Next, the DrayTek Service Activation screen will be shown as the following.

9. Click Close. Now, you have finished all the procedure for activating Anti-Spam service for your router.

Note: You are allowed to use this version (with anti-spam feature) for 30 days after registration for your router. In addition, you will be informed with an e-mail before expire date of this version.

VigorPro 5510 Quick Start Guide

44..55 BBaacckkuupp aanndd UUppggrraaddee SSiiggnnaattuurree ffoorr AAnnttii--IInnttrruussiioon

You can get the most updated signature from DrayTek’s server if the license key of anti-virus/anti-intrusion for the VigorPro 5510 is not expired. Before you upgrade the signature, please check the validation information either from WEB user interface of VigorPro 55100 or account information from www.vigorpro.com.

1. Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to

ask for username and password.

2. From the router’s web page, please open Defense Configuration >>Signature Upgrade.

You will see the following web page.

3. On Signature Upgrade web page, locate Backup and Download Now!!!.

n//AAnnttii--VViirruuss

VigorPro 5510 Quick Start Guide

TTiimmee ffoorr BBaacckkuupp

Before changing other license, it is suggested for you to backup the original signature first. To backup current signature information with the filename vigorpro.sig, click Backup.

TTiimmee ffoorr DDoowwnnllooaadd

After changing other license, it is suggested for you to download newly update signature for your router. To download newly update anti-intrusion and anti-virus from VigorPro website, please click Download Now!!!.

TTiimmee ffoorr IImmppoorrtt

Backup files can be imported whenever you want. To use a saved signature information, please click Import.

In addition, users can specify certain time for executing the upgrade automatically by the router. Remember to check the Schedule Update box and click OK to activate the time settings.

44..66 EEnnaabblliinngg AAnnttii--VViirruuss//AAnnttii--IInnttrruussiioonn

After applying an account, registering your account and router, you have to access into the web page of Vigor router to enable Anti-Virus/Anti-Intrusion functions. There are two ways to enable it.

A. For the default rule of firewall, please open Firewall>>General Setup page. Check the box

of Enable for Anti-Intrusion, and choose proper action (profile) from the drop down list of Anti-Virus. Next, click OK to finish the procedure of activation.

VigorPro 5510 Quick Start Guide

B. For specified filter rule (there are twelve filter sets in Firewall, and each set is allowed to set

seven filter rules), please check the box of Enable for Anti-Intrusion, and choose proper action (profile) from the drop down list of Anti-Virus. Next, click OK to finish the procedure of activation.

If you do not check the Anti-Intrusion box and choose a proper profile for Anti-Virus, you still cannot use the Anti-Intrusion/Anti-Virus function even if you finished all the relational profiles configuration.

VigorPro 5510 Quick Start Guide

55.. TTrroouubbllee SShhoooottiinngg

This section will guide you to solve abnormal situations if you cannot access into the Internet after installing the router and finishing the web configuration. Please follow sections below to check your basic installation status stage by stage.

¾ Checking if the hardware status is OK or not. ¾ Checking if the network connection settings on your computer are OK or not. ¾ Pinging the router from your computer. ¾ Checking if the ISP settings are OK or not. ¾ Backing to factory default setting if necessary.

If all above stages are done and the router still cannot run normally, it is the time for you to contact your dealer for advanced help.

55..11 CChheecckkiinngg IIff tthhee HHaarrddwwaarree SSttaattuuss IIss OOKK oorr NNoott

Follow the steps below to verify the hardware status.

1. Check the power line and WLAN/LAN cable connections.

Refer to “2.1 Hardware Installation” for details.

2. Turn on the router. Make sure the ACT LED blink once per second and the correspondent

LAN LED is bright.

3. If not, it means that there is something wrong with the hardware status. Simply back to “2.1

Hardware Installation” to execute the hardware installation again. And then, try again.

55..22 CChheecckkiinngg IIff tthhee NNeettwwoorrkk CCoonnnneeccttiioonn SSeettttiinnggss oonn

YYoouurr

CCoommppuutteerr IIss OOKK oorr NNoott

Sometimes the link failure occurs due to the wrong network connection settings. After trying the above section, if the link is stilled failed, please do the steps listed below to make sure the network connection settings is OK.

VigorPro 5510 Quick Start Guide

FFoorr WWiinnddoowwss

The example is based on Windows XP. As to the examples for other



operation systems, please refer to the similar steps or find support notes in www.draytek.com.

1. Go to Control Panel and then double-click on Network Connections.

2. Right-click on Local Area Connection and click on Properties.

3. Select Internet Protocol (TCP/IP) and then click Properties.

VigorPro 5510 Quick Start Guide

4. Select Obtain an IP address automatically and Obtain DNS server address

automatically.

FFoorr MMaaccOOss

1. Double click on the current used MacOs on the desktop.

2. Open the Application folder and get into Network.

3. On the Network screen, select Using DHCP from the drop down list of Configure IPv4.

VigorPro 5510 Quick Start Guide

55..33 PPiinnggiinngg tthhee RRoouutteerr ffrroomm YYoouurr CCoommppuutteerr

The default gateway IP address of the router is 192.168.1.1. For some reason, you might need to use “ping” command to check the link status of the router. The most important thing is that the computer will receive a reply from 192.168.1.1. If not, please check the IP address of your computer. We suggest you setting the network connection as get IP automatically. (Please refer to the section 5.2)

Please follow the steps below to ping the router correctly.

FFoorr WWiinnddoowwss

1. Open the Command Prompt window (from Start menu> Run).

2. Type command (for Windows 95/98/ME) or cmd (for Windows NT/ 2000/XP). The DOS

command dialog will appear.

3. Type ping 192.168.1.1 and press [Enter]. It the link is OK, the line of “Reply from

192.168.1.1:bytes=32 time<1ms TTL=255” will appear.

4. If the line does not appear, please check the IP address setting of your computer.

FFoorr MMaaccOOss ((TTeerrmmiinnaall))

1. Double click on the current used MacOs on the desktop.

2. Open the Application folder and get into Utilities.

3. Double click Terminal. The Terminal window will appear.

4. Type ping 192.168.1.1 and press [Enter]. It the link is OK, the line of “64 bytes from

192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms” will appear.

VigorPro 5510 Quick Start Guide

55..44 CChheecckkiinngg IIff tthhee IISSPP SSeettttiinnggss aarree OOKK oorr NNoot

Click WAN>>Internet Access group and then check whether the ISP settings are set correctly.

FFoorr PPPPPPooEE UUsseerrss

1. Check if the Enable option for PPPoE Link is selected.

2. Check if Username and Password are entered with correct values that you got from your

ISP.

VigorPro 5510 Quick Start Guide

FFoorr SSttaattiicc IIPP//DDHHCCPP UUsseerrss

1. Check if the Enable option for Static or Dynamic IP is selected.

2. Check if IP Address, Subnet Mask and Gateway are set correctly (must identify with the

values from your ISP) if you choose Specify an IP address.

FFoorr PPPPTTPP UUsseerrss

1. Check if the Enable option for PPTP Link is selected. And check the IP address for the

PPTP Server.

2. Check if IP Address and Subnet Mask are set correctly (must identify with the values from

your ISP) if you choose Specify an IP address.

VigorPro 5510 Quick Start Guide

55..55 BBaacckkiinngg ttoo FFaaccttoorryy DDeeffaauulltt SSeettttiinngg IIff NNeecceessssaarry

Sometimes, a wrong connection can be improved by returning to the default settings. Try to reset the router by software or hardware.

Warning: After pressing factory default setting, you will loose all settings you did before. Make sure you have recorded all useful settings before you pressing. The password of factory default is null.

SSooffttwwaarree RReesseett

You can reset the router to factory default via Web page. Go to System Maintenance and choose Reboot System on the web page. The following screen

will appear. Choose Using factory default configuration and click OK. After few seconds, the router will return all the settings to the factory settings.

HHaarrddwwaarree RReesseett

While the router is running (ACT LED blinking), press the RST button and hold for more than 5 seconds. When you see the ACT LED blinks rapidly, please release the button. Then, the router will restart with the default configuration.

After restore the factory default setting, you can configure the settings for the router again to fit your personal request.

VigorPro 5510 Quick Start Guide

55..66 CCoonnttaaccttiinngg YYoouurr DDeeaalleerr

If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com.

VigorPro 5510 Quick Start Guide

DrayTek VigorPro 5510 Quick Install Guide

Specifications and Main Features

Frequently Asked Questions

User Manual

The Quick Start Wizard is designed for you to easily set up your router for Internet access. You can directly access the Quick Start Wizard via Web Configurator.

1. Open Service Activation Wizard.