
VigorNIC 132
Series
VDSL2/ADSL2+ PCI-E Card
Support IPv6 & IPv4 network
Firewall with URL filtering
Support Windows8 & Ubuntu
Multi-PVC for triple-play application
Built-in VDSL2 modem for easy Internet access
Dual port for Internet backup
VigorNIC 132 series, as a comprehensive
network card, can be installed inside the
network server frame. It is designed for the
usage of industrial and server field. Unlike
using the Ethernet interface, VigorNIC 132
series can be directly connected to the POTS
line. It can also be connected to the fiber
network with external fiber modules. The backĀup function makes sure the immediate
recovery of service activated between different
lines.
In addition, in response to different network
environments and different user needs,
PCI Express Connection
VigorNIC 132 series is not just a network card
but also a router with DrayTek owned DrayOS
software inside. The built-in DrayOS system
allows users to set it to bridge mode or router
mode based on different environment. It also
provides an object firewall functions. With the
high-speed PCI-e bus interface, VigorNIC 132
series can avoid congestion and packet delay.
Besides, the PCI-e interface also offers power
directly to save the power consideration and
has the advantage of lightning or power
surges protection. Moreover, the maximum
power consumption of VigorNIC 132 series is
only 6 watts.
WAN2
RJ-45 (VigorNIC 132) or
SFP (VigorNIC 132F)
WAN1
xDSL
Any WAN can be the primary WAN and the other WAN is backup only.

IP Version
IP
v4
IP
v6
Tunnel Mode: TSPC, AICCU, 6in4, 6rd
Dual Stack: PPP, DHCPv6 Client, Static I
Pv6
ADSL / VDSL Compliance
ITU-T VDSL2 G.993.2
ITU-T G.vectoring
Auto Fall back to ADSL2/2+
VDSL Band Plan: 997, 998
VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
Annex A, Annex B, Annex M, Annex J
ANSI T1.413 Issue2
ITU-T G.992.1 G.dmt
ITU-T G.992.3 ADSL2 (G.dmt.bis)
ITU-T G.992.5 ADSL2+
Loop diagnostic mode
Compatible with POTS / PSTN
Content Security Management
URL Content Filter:
URL Keyword Filter (White List and Black List)
Java Applet, Cookies, Active X, Compressed,
Executable, Multimedia File Blocking
Multiple-PVC/VLAN
Multiple-PVC : up to 5 PVCs
Triple-Play Application
TR-069 Management with
dedicated PVC
Support PVC to PVC binding
WAN Protocol
DHCP Client
Static IP
PPPoE
PPPoA (ADSL2/2+ only)
MPoA (RFC1483/2684)
802.1q VLAN Tagging
Network Feature
Router/Bridge Configurable
IGMP Proxy V2/V3
DHCP Client/Relay/Server
UPnP 100 Sessions
DNS Cache/Proxy
Dynamic DNS
NTP Client
Static Route
VigorNIC 132
Network Management
Web-based User Interface (HTTP/HTTPs)
Quick Start Wizard
CLI (Command Line Interface, Telnet/SSH)
Administration Access Control
Configuration Backup/Restore
Built-in Diagnostic Function
Firmware Upgrade via TFTP/FTP/WUI/TR-069
Logging via Syslog
TR-069 Compliance with VigorACS SI
SNMP v1/v2c
Hardware Interface
1 x VDSL2/ADSL2+ port with RJ-11 for Annex A,
or RJ-45 for Annex B (WAN1)
1 x SFP Fiber Ethernet (VigorNIC 132F)
or Copper Ethernet with RJ-45 (VigorNIC 132)
(WAN2)
1 x PCI express 1.1 Bus with (x1) Connector
1 x Factory Reset Button
Operating System
Windows : 7 or Above
Linux : Ubuntu, RedHat (Option)
Firewall/NAT
DMZ Host, Port-redirection and Open Port
MAC Address Filter
SPI (Stateful Packet Inspection)
DoS Prevention
E-mail Alert and Logging via Syslog
Time Schedule Control
VPN Pass-through (IPsec, PPTP, L2TP)
Firewall Application of VigorNIC 132 Series
Multi-NAT
DMZ Host
Stateful Packet Inspection
VigorNIC 132
VigorNIC 132
Fiber
F
991-01 300 00- 01
ADSL
Firewall
Specifications subject to change at any time without notice, for more information please visit www.draytek.com or contact your local representative.