Draper 220160 Instructions

Assembly Instructions

Friction Lock
release

Alternate stud locations for

wall or corner position

Dress-Up Kit/Pipe and Drape Runoff System by Draper

Caution

➀ Be careful not to snag fabric with steel hooks on ends of horizontal
drape supports.

➁ If placed on an incline, weights such as sandbags may be necessary to
add stability.

➂ Some drapery fabrics are dry clean only. See fabric care notes below.
➃ Drapes are hemmed at top and bottom to accept horizontal supports.
➄ Drape panels are 13' wide for setup at 10', with 30% fullness.
➅ Excessive heat, loading and leaving fabrics in dryer too long will detract

from the permanent press characteristics.
➆ Hang only recommended drapes from horizontal supports. Do not

overload.

➁ Thread horizontal drape support through top pocket of drape (see Fig. 3).

Dress-Up Kit Assembly

PLEASE NOTE: All components are labeled and color coded to facilitate
assembly.

➀ Valance Bar attaches to frame with simple bayonet-style mounting.
➁ Drape Bars mount to Valance Bar, bayonet-style.

Valance Bar

Drapery

Bar

Drapery

Bar

➂ Attach one end of horizontal drape support to one of the uprights (see
Fig. 4).

➃ Extend or collapse horizontal drape support to proper length.
➄ Attach remaining end of horizontal drape support to other upright.

Figure 3

Adjustable Skirt Bar

Figure 1

➂ Optional adjustable Skirt Bar is secured to frame at desired level with

positive-locking plunger mechanism. If Skirt Bar is not used, Skirt may be
snapped to bottom of viewing surface.

➃ Valance, Drapes, and Skirt snap onto Mounting Bars.

Pipe & Drape Runoff Assembly

➀ Atach uprights to steel bases using studs and place as close as possible to
fi nal position (see Fig. 2).

NOTE: Alternate stud locations are provided to allow placement of steel
bases against walls or in corners.

Figure 2

®

Figure 4

➅ Adjust height by depressing friction lock to release upper portion of
telescoping upright (see Fig. 5). Release friction lock to lock upright at
desired height.

Figure 5

Fabric Care

Cotton: 100% cotton drapery fabrics are dry clean only.
Polyester: Polyester drapery fabrics should be machine washed to 120

degrees Fahrenheit using mild detergents. Remove from washer immediately
and tumble dry to 120 degrees Fahrenheit using a cool-down cycle. Remove
immediately to avoid wrinkling.

Copyright ©2012 Draper, Inc. Form DressKit_Inst12 Printed in U.S.A.

If you encounter any diffi culties installing or servicing your screen, call your
dealer or Draper, Inc., Spiceland, Ind., [phone]; or fax [phone].