Page 1
Projection Screen Care & Maintenance
Matt White & High Contrast Grey
Clean surface with a solution of mild dishwashing liquid diluted with warm water. A 50/50 mix of Simple
®
Green
face, completely rinse the entire surface with clear water and blot dry. Do not allow any cleaner to be absorbed
by the fabric. Do not use clean ing solvents or abrasives. Do not use Armor All
Clean with a very soft brush or cloth and care ful ly dust the surface. Do not use soap, water, solvents or abrasives. Do not use Armor All
Clean surface with a solution of mild dishwashing liquid diluted with warm water. A 50/50 mix of Simple
Green
face, completely rinse the entire surface with clear water and blot dry. Do not allow any cleaner to be absorbed
by the fabric. Do not use cleaners which contain abrasives or wax. Do not use Armor All
Clean with a very soft brush or cloth and care ful ly dust the surface. Do not use soap, water, solvents or abrasives. Do not use Armor All
Clean surface with a solution of mild dishwashing liquid diluted with warm water. A 50/50 mix of Simple
Green
face, completely rinse the entire surface with clear water and blot dry. Do not allow any cleaner to be absorbed
by the fabric. Allow screen to air dry overnight in down position. Do not use clean ing solvents or abrasives.
Do not use Armor All
All- Purpose Cleaner and water may also be used. Using a soft, disposable cloth, gently wipe the sur-
®
.
Glass Beaded
®
.These substances will damage a glass beaded viewing surface.
Flexible Matt White, M1300, HiDef Grey
®
All- Purpose Cleaner and water may also be used. Using a soft, disposable cloth, gently wipe the sur-
®
.
M2500
®
.
AT1200 & AT Grey
®
All- Purpose Cleaner and water may also be used. Using a soft, disposable cloth, gently wipe the sur-
®
.
Cineflex, UniFlex
Gently clean this rear projection material with a diluted solution of mild dishwashing liquid and warm water.
A 50/50 mix of Simple Green
cloth, gently wipe the surface, completely rinse the entire surface with clear water and blot dry. Do not allow
any cleaner to be absorbed by the fabric. Do not use cleaners which contain abrasives or wax. Do not use
Armor All
®
.
®
All- Purpose Cleaner and water may also be used. Using a soft, disposable
Rigid Rear Screens
IRUS, Cinescreens®, both glass and acrylic, DiamondScreens™ and Vortex screens can be cleaned with a
soft, lint free cloth to remove dust from the surface. Remove soil marks with a cloth or sponge and mild soapy
water. Wring free of excess moisture before applying, rinse and blot dry. Do not use solvent or abra sives. Do
not use Armor All
®
.
Parts / Repair
Parts or service information may be obtained by contacting manufacturer direct.
®
Copyright © 2010 Draper Inc. Form Care&Maintenance_Inst10 Printed in U.S.A.
Cinescreen® is a reg is tered trademark of Draper, Inc.
Simple Green
Armor All
®
®
is a reg is tered trademark of Sunshine Makers, Inc.
is a registered trademark of Armor All Products Corporation
Loading...