Doyon DRP4, DRPR3, DRPR4, DRP3, DRP4S Instruction Manual

PIZZA WARMER

DRP3 & DRPR3
DRP4 & DRPR4

DRP4S & DRPR4S

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

DANGER

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

CAREFULLY FOLLOW THESE INSTRUCTIONS

TABLE OF CONTENTS

SECTION « A » DESCRIPTION PAGE

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1

Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2

Installation warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2

Distances to respect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A4

Maintenance and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A5

For more information, please contact our office: . . . . . . . . . . . . . . . . . . . . A6

SECTION « B » DIMENSIONS

DRP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B1

DRPR3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2

DRP4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3

DRPR4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B4

DRP4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B5

DRPR4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B6

SECTION « E » COMPONENT PARTS

DRP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E1

DRPR3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E3

DRP4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E5

DRPR4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E7

DRP4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E9

DRPR4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E11

SECTION « G » ELECTRIC SCHEMATICS

DRP3 - 120V/1PH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . G1

DRPR3 - 120V/1PH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G2

DRP3 - 230V/1PH/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G3

DRPR3 - 230V/1PH/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G4

DRP4 - 120V/1PH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G5

DRPR4 - 120V/1PH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G6

DRPR4 - 120V/1PH (1 DOOR SWITCH) . . . . . . . . . . . . . . . . . . . . . . . . G7

DRPR4 - 120V/1PH (2 DOOR SWITCH) . . . . . . . . . . . . . . . . . . . . . . . . G8

DRP4 - 230V/1PH/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G9

DRPR4 - 230V/1PH/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G10

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FAMDRP3A.DOC Rev. 31/03/05

SECTION

A

DESCRIPTION

A 1

INTRODUCTION

The manufacturer suggests to read this manual carefully.

This electric warmer is manufactured with first quality material by experienced technicians. Proper
installation and maintenance will guarantee a reliable service for years to come.

A nameplate specifies the model number, serial number, voltage, amperage, frequency and
manufacturing date.

Drawings, electrical diagram and replacement parts numbers are included in this manual.

ATTENTION

DOYON is not responsible for damages to the property or the equipment caused
by personnel who is not certified by known organisations.

A 2

SHIPPING

For your safety, this equipment has been verified by qualified technicians and carefully crated before
shipment. The freight company assumes full responsibility concerning the delivery in good condition
of the equipment in accepting to transport it.

IMPORTANT

RECEPTION OF THE MERCHANDISE

Take care to verify that the received equipment is not damaged before signing the delivery receipt. If
a damage or a lost part is noticed, write it clearly on the receipt. If it is noticed after the carrier has
left, contact immediately the freight company in order that they do their inspection.

We do not assume the responsibility for damages or losses that may occur during transportation.

INSTALLATION WARNINGS

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS

AND LIQUIDS IN THE VICINITY OF THIS OR ANY APPLIANCE

INSTALLATION AND SERVICE

The warmer must be connected to the utility and electrically grounded in conformity to the effective
local regulations. If these are not established, the warmer must be connected according to the
National Electrical Code (NFPA 70-XX). This equipement has a male plug that meets those
requirements.

A 3

DISTANCES TO RESPECT

You must keep a clearance of one-inch (1") from combustibles material which includes the back, the
top and the sides of the warmer.

GENERALITIES

Take off the packaging material with care. Take off all the material used for packing and
accessories.

This equipment can be plugged on any network offering a protection of 15 amps.

DRP3 & DRP4

1. Fill the pan with water.

2. Turn the switch "on".

3. Adjust the thermostat at 175° F.

DRP3R & DRPR4

1. Fill the pan with water.

2. Turn the two switches "on".

A 4

OPERATION

3. Adjust the thermostat at 175° F.

* To stop the rotation of the rack only, turns the right switch "off".

A 5

OVEN MAINTENANCE AND CLEANING

Step by step Recommendations

Clean the inside of the warmer with water
and soap

Take out the grills (the grills of the oven
could be cleaned with "Easy-Off")
After cleaning the inside of the warmer,
apply a silicone base oven protector. It
avoids food from sticking to the metal.

Clean the warmer windows with products
like Brasso or equivalents. They are copper
cleaners but good for this use.

Clean the warmer exterior with a stainless
steel cleaner.

We recommend and sell:
Durt Buster III : Action foam cleaner.
CHEMCO
Part number : NEB201

We recommend and sell:
316 Silicone base protector and lubricant for
oven
Dow Corning
Part number : EXS400
We recommend and sell:
Wright's: Cream copper cleaner
J.A. Wright & Co.
Part number : EXC300
We recommend and sell:
Stainless steel cleaner.
SANY or CURTIS (comestible)
Part number : NES201

A 6

FOR MORE INFORMATION,

PLEASE CONTACT OUR OFFICE:

DOYON EQUIPMENT INC.

1255, rue Principale, C.P. 250

Linière, Qc, Canada G0M 1J0

Tel. : [phone]

Canada : 1 [phone]

U.S. : 1 [phone]

FAX : [phone]

Internet: http://www.doyon.qc.ca

E-Mail : [e-mail]

SECTION

B

DIMENSIONS

21 3/4

DRP3

B-1

DRP3

20 1/2

21 3/8

POWER ROTATING

210

200

190

180

170

160

150

140

120

250

OFF

220

230

240

Cooper

40

60

80

100

200

150

100

60

21 3/4

DRPR3

B-2

20 1/2

21 3/8

ROTATINGPOWER

190

180

170

160

150

OFF

220

210

230

200

240

Cooper

40

60

140

80

120

100

200

250

150

100

60

DRPR3

23 7/8

B-3

DRP4

DRP4

22 1/2

25 3/4

POWER

200

190

180

170

160

150

140

250

OFF

220

210

230

240

Cooper

40

60

80

120

100

200

150

100

60