The manufacturer suggests to read this manual carefully.
This electric warmer is manufactured with first quality material by experienced technicians. Proper
installation and maintenance will guarantee a reliable service for years to come.
A nameplate specifies the model number, serial number, voltage, amperage, frequency and
manufacturing date.
Drawings, electrical diagram and replacement parts numbers are included in this manual.
ATTENTION
DOYON is not responsible for damages to the property or the equipment caused
by personnel who is not certified by known organisations.
Page 5
A 2
SHIPPING
For your safety, this equipment has been verified by qualified technicians and carefully crated before
shipment. The freight company assumes full responsibility concerning the delivery in good condition
of the equipment in accepting to transport it.
IMPORTANT
RECEPTION OF THE MERCHANDISE
Take care to verify that the received equipment is not damaged before signing the delivery receipt. If
a damage or a lost part is noticed, write it clearly on the receipt. If it is noticed after the carrier has
left, contact immediately the freight company in order that they do their inspection.
We do not assume the responsibility for damages or losses that may occur during transportation.
INSTALLATION WARNINGS
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF THIS OR ANY APPLIANCE
INSTALLATION AND SERVICE
The warmer must be connected to the utility and electrically grounded in conformity to the effective
local regulations. If these are not established, the warmer must be connected according to the
National Electrical Code (NFPA 70-XX). This equipement has a male plug that meets those
requirements.
Page 6
A 3
DISTANCES TO RESPECT
You must keep a clearance of one-inch (1") from combustibles material which includes the back, the
top and the sides of the warmer.
GENERALITIES
Take off the packaging material with care. Take off all the material used for packing and
accessories.
This equipment can be plugged on any network offering a protection of 15 amps.
Page 7
DRP3 & DRP4
1.Fill the pan with water.
2.Turn the switch "on".
3.Adjust the thermostat at 175° F.
DRP3R & DRPR4
1.Fill the pan with water.
2.Turn the two switches "on".
A 4
OPERATION
3.Adjust the thermostat at 175° F.
* To stop the rotation of the rack only, turns the right switch "off".
Page 8
A 5
OVEN MAINTENANCE AND CLEANING
Step by stepRecommendations
Clean the inside of the warmer with water
and soap
Take out the grills (the grills of the oven
could be cleaned with "Easy-Off")
After cleaning the inside of the warmer,
apply a silicone base oven protector. It
avoids food from sticking to the metal.
Clean the warmer windows with products
like Brasso or equivalents. They are copper
cleaners but good for this use.
Clean the warmer exterior with a stainless
steel cleaner.
We recommend and sell:
Durt Buster III : Action foam cleaner.
CHEMCO
Part number : NEB201
We recommend and sell:
316 Silicone base protector and lubricant for
oven
Dow Corning
Part number : EXS400
We recommend and sell:
Wright's: Cream copper cleaner
J.A. Wright & Co.
Part number : EXC300
We recommend and sell:
Stainless steel cleaner.
SANY or CURTIS (comestible)
Part number : NES201
Page 9
A 6
FOR MORE INFORMATION,
PLEASE CONTACT OUR OFFICE:
DOYON EQUIPMENT INC.
1255, rue Principale, C.P. 250
Linière, Qc, Canada G0M 1J0
Tel. : 1 (418) 685-3431
Canada : 1 (800) 463-1636
U.S. : 1 (800) 463-4273
FAX : 1 (418) 685-3948
Internet: http://www.doyon.qc.ca
E-Mail : doyon@doyon.qc.ca
Page 10
SECTION
B
DIMENSIONS
Page 11
21 3/4
DRP3
B-1
DRP3
20 1/2
21 3/8
POWER ROTATING
210
200
190
180
170
160
150
140
120
250
OFF
220
230
240
Cooper
40
60
80
100
200
150
100
60
Page 12
21 3/4
DRPR3
B-2
20 1/2
21 3/8
ROTATINGPOWER
190
180
170
160
150
OFF
220
210
230
200
240
Cooper
40
60
140
80
120
100
200
250
150
100
60
DRPR3
Page 13
23 7/8
B-3
DRP4
DRP4
22 1/2
25 3/4
POWER
200
190
180
170
160
150
140
250
OFF
220
210
230
240
Cooper
40
60
80
120
100
200
150
100
60
Page 14
23 7/8
B-4
DRPR4
DRPR4
22 1/2
30 3/4
ROTATING
POWER
210
200
190
180
170
160
150
140
120
250
OFF
220
230
240
Cooper
40
60
80
100
200
150
100
60
Page 15
23 7/8
B-5
DRP4S
DRP4S
22 1/2
26 1/2
POWER
200
190
180
170
160
150
140
250
OFF
220
210
230
240
Cooper
40
60
80
120
100
200
150
100
60
Page 16
23 7/8
B-6
DRPR4S
DRPR4S
22 1/2
26 1/2
ROTATING
POWER
210
200
190
180
170
160
150
140
120
250
OFF
220
230
240
Cooper
40
60
80
100
200
150
100
60
Page 17
SECTION
E
COMPONENT PARTS
Page 18
E-1
DRP3
6
14
7
5
13
1211
4
POWER ROTATING
220
210
230
200
240
190
180
170
Cooper
3
2
160
40
150
60
140
80
120
100
200
250
150
OFF
100
60
1098
1
DRP3
Page 19
E-2
ItemPart NumberDescriptionQuantity
150010823DRP-3 & DRPR3 HINGE1
2VT1916TEMPERED GLASS 5 MM1
3ELA325BULB 40W 120V1
4ELD050INCANDESCENT LIGHT SOCKET1
550010824DRP-3 & DRPR3 HANDLE1
6VT1815TEMPERED GLASS 5 MM3
7ELE125STRAIGHT ELEMENT 120V 1000W1
ORELE124STRAIGHT ELEMENT 240V 1500W FOR MODEL 220V 50HZ1
8ELF015120V MALE PLUG & CORD1
9ELT610THERMOSTAT 250F1
&ELT622THERMOSTAT BEZEL1
&ELT615THERMOSTAT KNOB 250F1
10ELL650RED PILOT LIGHT1
11RFTH06THERMOMETER 40-240°F1
12ELI635SWITCH 20A/130V - 15A/240 V P. LIGHT1
13PAP700ADJUSTABLE CHROMED LEG4
14ELM759COOLING FAN1
Model : DRP3 View : BACK
Page 20
E-3
DRPR3
16
15
14
6
13
7
5
4
3
2
ROTATINGPOWER
190
180
170
160
150
OFF
220
210
230
200
240
Cooper
40
60
140
80
120
100
200
250
150
100
60
1112
8910
1
DRPR3
Page 21
E-4
ItemPart NumberDescriptionQuantity
150010823DRP-3 & DRPR3 HINGE1
2VT1916TEMPERED GLASS 5 MM1
3ELA325BULB 40W 120V1
4ELD050INCANDESCENT LIGHT SOCKET1
550010824DRP-3 & DRPR3 HANDLE1
6VT1815TEMPERED GLASS 5 MM3
7ELE125STRAIGHT ELEMENT 120V 1000W1
ORELE124STRAIGHT ELEMENT 240V 1500W FOR MODEL 220V 50HZ1
8ELF015120V MALE PLUG & CORD1
9ELT610THERMOSTAT 250F1
&ELT622THERMOSTAT BEZEL1
&ELT615THERMOSTAT KNOB 250F1
10ELL650RED PILOT LIGHT1
11RFTH06THERMOMETER 40-240°F1
12ELI635SWITCH 20A/130V - 15A/240 V P. LIGHT2
13ELM759COOLING FAN1
14ELM938GEARMOTOR DAYTON 7 RPM 120 V1
ORELM937GEARMOTOR DAYTON5,87 RPM 220V 50HZ1
15QURB013THRUST BEARING1
16PAP700ADJUSTABLE CHROMED LEG4
Model : DRP3 ROTATIF View : BACK
Page 22
E-5
DRP4
6
5
4
14
7
13
3
1211
POWER
220
210
230
200
240
190
180
170
Cooper
160
40
150
60
140
80
120
100
1098
2
200
250
150
OFF
100
60
1
DRP4
Page 23
E-6
ItemPart NumberDescriptionQuantity
150010821DRP-4 & DRPR4 HINGE1
2VT2121TEMPERED GLASS 5 mm1
350010822DRP-4 & DRPR4 HANDLE1
4ELD050INCANDESCENT LIGHT SOCKET1
5ELA275BULB 60W 130V1
6VT2020TEMPERED GLASS 5 mm3
7ELE127HEATING ELEMENT 1250 WATTS 120 VOLTS1
ORELE124STRAIGHT ELEMENT 240V 1500W FOR MODEL 220V 50HZ1
8ELF015120V MALE PLUG & CORD1
9ELT610THERMOSTAT 250F1
&ELT622THERMOSTAT BEZEL1
&ELT615THERMOSTAT KNOB 250F1
10ELL650RED PILOT LIGHT1
11RFTH06THERMOMETER 40-240°F1
12ELI635SWITCH 20A/130V - 15A/240 V P. LIGHT1
13PAP700ADJUSTABLE CHROMED LEG4
14ELM759COOLING FAN1
(Continental United States Of America And Canada Only)
Doyon Equipment Inc. guarantees to the original purchaser only that its product are free of defects in
material and workmanship, under normal use.
This warranty does not cover any light bulbs, thermostat calibration or defects due to or resulting
from handling, abuse, misuse, nor shall it extend to any unit from which the serial number has been
removed or altered, or modifications made by unauthorised service personnel or damage by flood,
fire or other acts of God. Nor will this warranty apply as regards to the immersion element damaged
by hard water.
The extent of the manufacturer’s obligation under this warranty shall be limited to the replacement
or repair of defective parts within the warranty period. The decision of the acceptance of the
warranty will be made by Doyon Equipment service department, which decision will be final.
The purchaser is responsible for having the equipment properly installed, operated under normal
conditions with proper supervision and to perform periodic preventive maintenance.
If any parts are proven defective during the period of one year from date of purchase, Doyon
Equipment Inc. hereby guarantees to replace, without charge, F.O.B. Linière, Quebec, Canada, such
part or parts.
Doyon Equipment Inc will pay the reasonable labour charges in connection with the replacement
parts occurring within one year from purchase date. Travel over 50 miles, holiday or overtime
charges are not covered. After one year from purchase date, all labour and transportation charges in
connection with replacement parts will be the purchaser’s responsibility.
Doyon Equipment Inc. does hereby exclude and shall not be liable to purchaser for any
consequential or incidental damages including, but not limited to, damages to property, damages for
loss of use, loss of time, loss of profits or income, resulting from any breach or warranty.
In no case, shall this warranty apply outside Canada and continental United States unless the
purchaser has a written agreement from Doyon Equipment Inc.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.