Dovado pro tinyac Reference Manual

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Reference Manual 8.0.0

Universal Broadband Router

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Reference Manual 8.0.02

Table of Contents

Part 1

Introduction

................................................................................................................................... 4

1 Package contents

................................................................................................................................... 4

2 Access the router

................................................................................................................................... 5

3 Limited Internet Mode (L.I.M.)

................................................................................................................................... 5

4 Direct interface vs PPTP interface

................................................................................................................................... 5

5 Remote Management and Portforward

Part 2

Status Overview Bar

Part 3

Menu System

................................................................................................................................... 7

1 HOME

................................................................................................................................... 7

2 INTERNET

................................................................................................................................... 11

3 LAN

................................................................................................................................... 13

4 WLAN

................................................................................................................................... 15

5 VPN

................................................................................................................................... 16

6 SMS

................................................................................................................................... 18

7 NAS

................................................................................................................................... 19

8 AUTOMATION

................................................................................................................................... 20

9 POSITION

................................................................................................................................... 21

10 SYSTEM

................................................................................................................................... 23

11 UPGRADE

................................................................................................................................... 24

12 RESTART

................................................................................................................................... 24

13 LOGOUT

Part 4

Mobile User Interface

Part 5

API

................................................................................................................................... 26

1 Enabling the API

................................................................................................................................... 26

2 Connecting to the API

................................................................................................................................... 26

3 Logging in to the API

................................................................................................................................... 26

4 API Syntax

................................................................................................................................... 27

5 Router info

................................................................................................................................... 27

6 Upgrade via API

................................................................................................................................... 28

7 SMS

................................................................................................................................... 30

8 Check services available

................................................................................................................................... 30

9 API Coding

Part 6

Troubleshooting

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

3Contents

................................................................................................................................... 311 Scenarios

................................................................................................................................... 32

2 Frequently Asked Questions

Part 7

Support

Part 8

Open Source Notice

................................................................................................................................... 35

1 GPL v2 Applications

................................................................................................................................... 39

2 GPL v3 Applications

................................................................................................................................... 45

3 LGPL Application

................................................................................................................................... 50

4 Mixed Licenses

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Reference Manual 8.0.04

1 Introduction

Thank you for choosing a Dovado Router. Dovado has quickly become the leading, award-winning brand in terms of support for USB modems for 4G & 3G mobile broadband. In order to broaden your options of Internet access, this router is also capable of connecting to fixed broadband as well as other wireless (WiFi) networks. You will soon discover that Dovado is quick to support new modems, implement new software features and provide free firmware updates; all of which are easily accessible with help of the Dovado Live Upgrade feature, located in this menu.

On every page in the router's User Interface, you will see this icon. Click it, and you will be directed to the appropriate chapter in the reference manual automatically for further information and guidance.

1.1 Package contents

Make sure all of the listed items below are included in your package. If something is missing, kindly contact your reseller.

Router - USB Mobile Broadband router Power supply Quick Wizard Guide 2 x 3dBi antennas USB extension cable

Additional optional items:

In addition to the items above you will may require a mobile broadband USB modem in order to connect to a mobile network. This modem provides the wireless link to your operator's network and is sold separately. To use the Internet you need a computer.

1.2 Access the router

To access your router's menu system, connect your computer via WLAN or LAN port (with an Ethernet cable) and access the http://192.168.0.1 website.

If you are connecting your computer via Wireless LAN, search for a wireless network called "DOVADO-XXXXX", where XXXXX is a unique combination of characters. These details, along with the passphrase, are available on a label on your router.

Once you have reached the login page, the information below is the default settings for your router:

Username: admin Password: password

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Introduction 5

1.3 Limited Internet Mode (L.I.M.)

Dovado routers support most Hi-Link (Huawei) and CWID (ZTE)-based USB modems. However, unlike traditional USB modems, these specific models are designed to act as routers, imposing certain limitations due to the complication of a second private network layer.

Limitations with Huawei Hi-Link modems:

UPnP, SMS and Bridge Mode cannot be used. Port Forwarding is limited to a maximum total of 15 individual rule assignments.

Limitations with ZTE CWID modems:

UPnP and Bridge Mode cannot be used. Port Forwarding does not work (at all) on certain models. SMS is limited to certain models.

1.4 Direct interface vs PPTP interface

The Dovado router can have two IP Interfaces connected to the Internet: Direct Interface and PPTP Interface. It is possible to access the router and clients behind it via both interfaces using

their IP addresses

Direct Interface this is the router's own interface which it normally uses to communicate on the Internet PPTP Interface this interface exists when a VPN PPTP service is used. When PPTP is used the router has two IP addresses to the Internet.

1.5 Remote Management and Portforward

Not all Mobile Broadband operators, ISP and VPN providers allow external access to your router from the Internet. If the provider blocks such access it is not possible to use Remote Management or performing port forwards. Please contact your Internet Service Provider if you are having problems with accessing the router from the Internet.

Status Overview Bar

Atop of the user interface, a bar displays an overview of your Internet connection. This information sits outside the security zone of your router, and does not need to be accessed via an authorized login, thus saving time on checking the connection status.

The Connection Status Overview Bar shows the following information:

Date: Synchronized with a Dovado NTP (Network Time Protocol) server upon each new successful Internet connection.

Signal: The latest measurement gathered by the USB modem upon connection is displayed in a percentage value, along with the technology (2G, 3G or 4G).

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Reference Manual 8.0.06

The value is only updated after initiating a new connection.

SMS: Shows the number of unread SMS's.

WLAN: The value within the brackets indicates the channel(s) currently used.

Time: Displayed in a 24-hour format (HH:MM). In case the displayed time is incorrect, you can set the time zone in the System->NTP page.

Connection: Indicates whether your current Internet connection is via Ethernet WAN, USB modem

or via WiFi. This is useful if your router has been configured to perform automated failovers between one dropped Internet connection to a secondary (backup) connection.

IP: Shows the IP address the router has received from your Internet/Mobile-broadband Service Provider.

VPN: Show the IP address that the router has received from your VPN Service Provider

Connection Indicator: Green color indicates that the Dovado router is connected to the Internet

via a USB modem. Yellow color indicates that the router is connected Internet, but LAN and WiFi clients is disable to access the Internet due to that scheduled event in the Internet Scheduler. Red color indicates that it is disconnected from the Internet.

Traffic: Quickly displaying this month's Internet consumption in gigabytes (GB) on the downlink and uplink of the USB modem.

New FW: Indicates if there is a new firmware for the router. Click on the text to get to the Live Upgrade page

Position: The router’s GPS coordinates are displayed to the far right of the Status Overview Bar. These coordinates can by automatically updated if in a moving vehicle (with help of a GPS dongle in the additional USB port on the router), or are fixed coordinates when entered manually in the POSITION->SETTINGS menu.

Sunrise/Sunset: Based on the geographic position (GPS coordinates); the router will be able to automatically calculate what time the Sun will rise and set each day. This will dynamically shift throughout the year, and will assist you in automatically executing certain Home Automation tasks, for instance the powering off/on the lamps at home in accordance with the rising/setting of the Sun.

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Status Overview Bar 7

3 Menu System

The menu system is structured into sub-categories related to various functions and features. For each topic, there are sub-menus to the right side where you can alter the settings to suit your needs. All changes that are applied must be saved. Regardless of how many changes have been applied throughout the menu, they will only take effect once you have applied a Restart.

On every page in the router's User Interface, you will find this icon. If you click it, you will be

directed you to the Mobile version of this User Interface.

To get back to the desktop version, click the Computer icon in the User Interface

3.1 HOME

To view information about your Dovado router, click on the Home button in the menu. This is the first page you will see once logging into your router.

3.1.1 Home

This page displays information such as the router's serial number and also which firmware version it currently operates on.

3.1.2 Start Wizard

The Setup Wizard is a simple walk-through configuration that will ask you which settings you wish to use in order to access the Internet as well as secure your wireless network.

3.1.3 Troubleshooting

By default, the Troubleshooting Wizard is enabled. If it detects during the course of your setup that there is something wrong, the Troubleshooting Wizard will then advise you on what the possible faults may be.

Note: The Troubleshooting Wizard will not operate if either the Connection Tracker, Ethernet WAN port or a CDMA modem is being used.

3.2 INTERNET

Here you can define the role of your Internet interface (USB modem, Ethernet WAN port and WiFi Tethering "SpotboostTM"). This section will also give you the means to access your monthly data consumption.

Bridge Mode (NAT disabled): For usage scenarios where an additional private network (Network Address Translation) would impose difficulties, your Dovado router can be converted from the regular Routed Mode (NAT enabled) to Bridged Mode (NAT disabled). Please note that by selecting Bridge Mode, the Dovado router will not be operating its firewall.

Improvement of connection uptime: If your Internet connection is not holding well in terms of uptime, then please make use of the Connection TrackerTM feature within the sub-menu. This feature will poll the Internet to see if it is responding. If there is no response, the router will take steps to correct the situation.

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Reference Manual 8.0.08

3.2.1 Connection

This section configures how the router connects to the Internet. There are 3 different ways to connect to the internet.

USB Modem (If you have a 3G or 4G modem) Ethernet WAN Port, If you have a Fixed Internet Connection such as Fiber/ADSL/Cable TV WiFi Tethering Client (SpotboostTM), if you want the router to connect to another Wireless LAN,

such as a Smartphone or a Mobile Hotspot

After mode is selected go to the corresponding sub-menu (Modem, WAN or WiFi Tethering) to further configure the connection

Routed Mode (NAT Enabled)

In the (default) routed mode, multiple devices share a single public IP address.

Bridge Mode* (NAT disabled) only available when using a USB Modem

In this mode, the router will be transformed into a converter between USB and LAN or WLAN. Bridge Mode will disable the NAT/routing functionality. As it will no longer retain any functionality dependent on IP, certain features such as Connection Tracker, PPTP VPN and E-Mail Notifications will not be operational during use of Bridge Mode.

*Please check http://www.dovado.com/modems to see which modems support Bridge Mode

3.2.2 Status

Here you can see the details on your current connections. There are 3 categories.

Internet Status which shows information about your Internet Connection VPN which shows the PPTP shows information about PPTP Connection USB Modem shows the details of your USB modem's radio signal. It will also display which

network mode the router is connected to (4G, 3G or 2G), along with the USB Modem's unique IMEI number, and the SIM card's unique IMSI number. This information might be useful when dealing with your mobile operator's helpdesk.

3.2.3 Modem

On the Internet->Modem page, you will be able to insert all the valid inputs in order to access the Internet via your mobile operator.

APN

There are several relevant bits of information which are necessary in order to complete this task successfully:

APN (Access Point Name). If you are not sure what your mobile operator's APN is, please contact them or check with your modem manual.

Network Preference

Please select how the modem should connect to the network, In auto mode, the modem tries to connect to the network with the best condition. It is also possible to lock it to either 4G / 3G or 2G. Some 4G modems are also compatible with the additional locking of a certain frequency. In 4G mode is also possible to force it on some modems to a certain frequency.

PIN code

This is your PIN code provided with your SIM card which resides in your USB modem. If you click "Disable PIN code" then the router will disable the PIN-code on the SIM card.

Authentication

Username & Password: Some operators may require you to insert a username and password in order to authenticate towards the mobile network. If you haven't been provided with this, then using

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Menu System 9

only an APN might be sufficient. If not, then please contact your operator.

My L.I.M modem requires a username and password for its web admin pages

This setting is needed if your USB modem requires Username Password to access its GUI

Enable DMZ settings on ZTE modem to support Port Forwarding

This settings needs to be enable if you have a ZTE modem with WEB GUI support and want to do portforward

Let router set connection options and APN on L.I.M (Mobile hotspot)

If you enable this setting the router will be able to alter settings such as APN and connection mode on your Mobile Hotspot

PPP and Network Settings

Alter advanced PPP and network settings such as timeouts and IP packet transfer size

PPP settings

Here you can fine-tune your mobile Internet connection.

PPP Idle Timeout PPP Echo timeout The PPP echo timeout value, this value is normally 60 seconds PPP Echo count The PPP echo counter value, this value is normally 3 seconds Modem Call string (3G: *99#, CDMA: #777)

Network Settings

Here you can alter the settings regarding your network connection

Load preset Predefined profiles for different networks types. WAN

MTU Change the Maximum Transmission Unit MRU Change the Maximum Maximum Receive Unit Enable MSS Clamping Enabling MSS clamping will force the clients to use a certain MTU

3.2.4 WAN

The default setting is that your operator automatically will allocate you an IP address. Should your operator have given you a static (specific) IP address, then select Manual (Static) settings and fill in the given information in the relevant fields.

WAN IP Configuration

Automatic/Dynamic (DHCP)

Should your operator have given you a dynamic IP addresses, then select the Automatic/Dynamic (DHCP) setting.

Manual (Static)

Should your operator have given you a static (specific) IP address, then select the Manual (Static) settings and fill in the given information in the relevant fields.

PPPoE

Should your operator use PPPoE to give you a IP address, then select the PPPoE settings and fill in the given information in the relevant fields.

Advanced Network Settings

Alter advanced network settings such as timeouts and IP packet transfer size

MTU Change the Maximum Transmission Unit MRU Change the Maximum Maximum Receive Unit Enable MSS Clamping Enabling MSS clamping will force the clients to use a certain MTU

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Reference Manual 8.0.010

Custom WAN MAC Address

Here you can modify your external WAN port Ethernet MAC Address. Enter the MAC Address in hexadecimal, using the formats: "00:11:22:33:44:55" or "00-11-22-33-44-55"

3.2.5 DNS

Here you can alter the DNS (Domain Name System) settings in the router.

Dynamic DNS Server Settings: In most cases, the operator which provides the Internet service to your router is handing out a dynamic IP address (constantly-changing). The Dynamic DNS feature allows you to contact your router via an easily accessible hostname, such as myrouter.mydyndns.com

The Following Dynamic DNS provider is supported

DynDNS.org No-IP.com Loopia.se freedns.afraid.org CityNetwork.se Other Dynamic DNS provider

The following information needs to be filled in

Profile Name The name of the Dynamic DNS profile Service Provider Select which provider you want to use Username The username to your Dynamic DNS provider Password The password to your Dynamic DNS provider Domain Name here you enter the Dynamic DNS name that you have registered. e.g

example.dyndns.org Interface Here you can select if you should use the direct IP interface (default) or use the PPTP interface to update the dynamic DNS

Special note for freedns.afraid.org

Hash freedns.afraid.org does not use usernames, instead they use a private hash signature

Special note for Other Dynamic DNS provider

Service URL here you enter the URL to your Dynamic DNS provider that the router should use when updating your Dynamic DNS. It uses HTTP Basic authentication to authenticate with the server This is an example of a Service URL: http://dyndnsprovider.com/update? hostname=customhostname

Custom DNS: If your operator's DNS servers are unavailable, or if you wish to use a 3rd party DNS server, then insert the IP address of up to two different servers which the router should use. As a result, all devices on your network will then use those specified DNS servers.

3.2.6 Connection Tracker

In order to ensure maximum Internet availability you can use the Connection Tracker feature. When inserting a minimum of 2 unique IP addresses, these addresses will be "pinged" with an interval that you specify in minutes in the Interval field. After entering the selected IP addresses, you can test the ping function to these addresses by pushing the Test now button directly below the

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Menu System 11

IP address fields. The result will be shown to the right of each IP address field.

WARNING: Please note that if you are paying for bandwidth usage, activating this function will add data consumption to your monthly bill. An approximate figure for the additional monthly data consumption will be indicated directly to the right of the Interval field. Raising the interval value will lower the monthly consumption.

Should your internet connection drop, you have 3 options on how the router should react:

Redial only (in WAN Ethernet mode: Reinitialize interface). Default value that attempts to reestablish the broadband connection.

Redial and Restart (the router restarts itself after 3 failed redial attempts). Using this option, your local area/wireless network will be unreachable for a short while during the restart of the router.

Auto fail-over between interfaces (USB, Ethernet WAN or WiFi SpotboostTM. These interfaces must be properly configured in the event of a fail-over between each other. You can check which interface is your primary connection on the Internet->Connection page. If you have configured

multiple interfaces then you will have the choice to select fail-over prioritization between them. If you have configured the router to support two modems on the modem settings page then you will have the choice to select fail-over prioritization between WAN, USB1 and USB2 port

3.2.7 Traffic

It is possible to keep track of how much Internet traffic is consumed each new calendar month. The data from the previous month is also showed. The chart displays how much data has been downloaded via the USB modem. A total is calculated for the month per interface.These figures are automatically updated every five minute, a forced update can be manually requested by pushing the Update button.

3.2.7.1

Notification of Data Traffic Usage

Upon enabling this feature, the router can send you an SMS and/or E-Mail notification after a certain amount of data has been consumed by your Internet connection. It will then continuously update each time it passes that interval, thus providing you with an overview of your monthly data consumption. The router can alert you after every 100MB, 250MB, 500MB and 1000MB of downloaded or totally accumulated bi-directional traffic passed during the calendar month.

Note: By using your USB modem directly in the computer, the router will only be able to display the amount of data the router itself has consumed when the USB modem is inserted into it. It will not display what the USB modem has consumed; therefore, to acquire the most accurate accumulated figures, please contact your Internet service operator.

To enable notification by SMS, go to SMS->Remote Control, and select the Traffic Limit Reached, located under Notification SMS. To enable notification by E-Mail, go to System->E-Mail, and enter your E-Mail account configuration. Then proceed to Internet->Traffic, and select how often you would like to be notified by SMS and/ or E- Mail for an updated total of your calendar month's data consumption. You can also specify which kind of data to keep track of (downloaded only, or downloaded and uploaded; depending on your mobile broadband subscription terms).

For more information, please visit http://www.dovado.com/features/traffic

3.3 LAN

Here you can alter the settings that are relevant to your specific network, such as the Local Area Network (LAN) IP addressing, the Dynamic IP address pool (DHCP) as well as the Port Forwarding rules that will allow inbound access to your computers from the outside (Internet).

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Reference Manual 8.0.012

3.3.1 LAN Settings

Here you can alter the settings of the LAN Interface of your router.

IP address: is the IP address your router has on the local network, default address is

192.168.254.1 all clients will get IP addresses corresponding to this address Subnet Mask: Here you can alter the Subnet Mask which the router should use on its LAN Interface, the default subnet is 255.255.255.0

Note: If you change the subnet mask the router will reset several settings. Such as VPN, DHCP and Port Forwarding.

3.3.2 DHCP

DHCP Server allows you to enable or disable the built-in DHCP server. When enabled, all clients on your private network will automatically obtain an IP address from the range specified under Client IP Address Range. When disabled you have to manually enter an IP address into each client. Client Network Information allows you to set a domain name for the router and specify an additional DNS server.

Static Address Assignment: Can be used when you want a client to obtain the same IP address each time it logs on to your network. Select how you want to identify the client, either by hostname or MAC address. Type in the hostname or the MAC address under Host Identifier and finally, set the desired IP address under Internal Address. Please make sure not to assign the IP address of the router to any of the clients. Click on Add and then Save DHCP Settings when you are finished.

View DHCP Table: is a function that shows the IP and MAC addresses of all clients that has got an IP address assigned by the router

3.3.3 Port Forwarding

Port Forwarding to LAN lets you specify which ports clients on the public Internet shall be able to communicate through, to clients on your private network. Reserved Ports is a list of ports that cannot be used to access your private network from the public Internet.

Under Port Range, select a range (any range that does not contain the ports listed under Reserved Ports) from 1-65535. Select the type of traffic that should be let through on these ports, TCP or UDP, or Both. Finally, type in the Destination Address, which is the IP address of the client on your private network that you want to be accessible from the public Internet.

It is possible to select if the router should do the port-forwarding on either the Direct IP Interface or on PPTP connection.

It is also possible to forward incoming GRE (Generic Routing Encapsulation) / IPSEC traffic to a single host.

Note: By default,clients on your private network can always access the public Internet. However clients on the public Internet can not access your private network

3.3.4 UPnP

The router supports Universal Plug and Play. UPnP is a feature that enables client application on devices behind the router to automatically trigger the opening of TCP/UDP ports through the firewall in the router. UPNP will only work on the Direct IP interface, it will not work on PPTP interfaces. As a security precaution, this feature is disabled by default and can be enabled manually.

3.3.5 Hosts

Hosts List

As certain devices on your LAN might require a familiar representation (such as

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Menu System 13

"server.mynetwork.com"), you can pair the LAN IP address of that computer to "server.mynetwork.com". This means that if you try to surf to http://server.mynetwork.com from another computer on the same network, the router will redirect you locally to that specific computer.

Show Host on LAN

To view the current list of connected devices, click on "Show Hosts on LAN". The list will present the IP addresses along with their corresponding unique hardware (MAC) addresses.

3.4 WLAN

This menu will provide you the possibility to view/modify the Wireless LAN (WLAN) Settings.

3.4.1 WLAN Settings

Here are the settings for the wireless network. Wireless Band drop-down menu lets you choose what wireless standard to use in your private network. Possible choices are 802.11b with a maximum transfer rate of 11Mbps, 802.11g with a maximum transfer rate of 54Mbps, 802.11n with a maximum transfer rate of 300Mbps or 802.11b +g+n if you have clients with mixed types of network cards.

Channel drop-down menu lets you change the radio channel for the wireless communication. This is useful if you experience poor performance that could be as a result of interference from other wireless devices.If Auto is selected, the router will automatically determine which channel it should select.

Bandwidth drop-down menu will be enabled whenever 802.11b+g+n or 802.11n is selected as the Wireless Band. By default, 20MHz is selected as it ensures the best compatibility with client devices. When selecting 40MHz, a second channel is enabled which can increase throughput for compatible 802.11n which also support 40MHz. Please note that by selecting 40MHz, you might experience incompatibility with certain devices. In such case, please use 20MHz.

The 2nd Channel drop-down menu will be available once the Bandwidth has been manually set to 40MHz. From there, you can appoint the placement of the secondary channel to be located either below or above the primary channel. Please note that when using 40MHz, the gap between two bonded channel points is equivalent to 4 numbered channels. Therefore, if selecting channel 6, the paired channel will either be 2 or 10, depending on your selection of placement.

Data Rate drop-down menu is the setting for the transmission speed at the selected Wireless Band. If you experience problems at high data rates, then we recommend that you select a lower data rate.

SSID (Service Set Identifier): is the name of the router that will appear in other Wireless LAN clients when they perform a network search. Default value is DOVADO-XXXXX Where XXXXX is a unique combination, your unique combination you can find on the white sticker at the bottom of the router

SSID Broadcast: enables or disables transmission of the SSID from the router. When disabled, other Wireless LAN clients will not find the router when they perform a network search.

Fragment length: is a setting that affects the quality of the wireless transmissions. If you experience a high packet error rate you can decrease this value in small steps to reduce this problem. Setting the fragment length too low may result in poor performance. Default value is 2346.

RTS length: is a setting that affects the quality of the wireless transmissions. If you experience inconsistent data flow you can decrease this value in small steps to reduce this problem. Default value is Off.

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Reference Manual 8.0.014

Wireless Radio: enables or disables the WLAN. If you do not use any Wireless LAN devices it is recommended that you select disable.

Click on Save WLAN Settings and then Restart for the changes to take effect.

3.4.2 Authentication

The encryption settings for your Wireless LAN. Encryption is enabled by default in order to restrict access of wireless devices onto your private network. To locate the name of your WLAN (SSID) along with the unique passkey, kindly look at the white label located at the bottom of your router.

There are three main types of encryption methods in the Authentication Type dropdown menu, which are WPA1/WPA2-PSK, WEP Shared Key and WPA1/WPA2-Enterprise.

WPA-PSK is the most secure, and therefore the best recommended method. Choose it from the Authentication Type drop-down menu and then enter a pass phrase between 8 and 63 characters. The key is case sensitive. All Wireless LAN clients must use the exact same pass phrase in order to access your network. The absolute securest setting is to use WPA2 together with AES ciphering; however, older devices might not support it.

If you have a device that does not support WPA-PSK authentication, then select WEP Shared Key. Choose a Key Type, either HEX or ASCII. Then choose Key Size; 64 bits (for HEX this is 10 characters and for ASCII 5 characters) or 128 bits (for HEX this is 26 characters and for ASCII 13 characters): the longer the key, the stronger the encryption. The key is case sensitive. You have the possibility to define up to 4 different keys at once so that you can rotate keys in order to randomize your security.

WPA1/WPA2-Enterprise is based on the strong WPA-PSK authentication. However, the authentication is done on a RADIUS authentication server. For the router to negotiate with such a server, the server's IP address, communication port and login password must be configured. Such a solution is typically used in an enterprise environment.

Click on Save Authentication Settings and then Restart for the changes to take effect.

3.4.3 MAC Address Control

The settings for restricting access to your private network via white-listing of authorized clients. MAC Address Control enables or disables the MAC address filtering on the MAC addresses under WLAN->MAC Address Control. MAC Address Control is a security function that limits which clients can access your private network and the public Internet through your router. Enter the MAC address of the client that you want to grant access to your network (instructions on how to obtain the MAC address in Windows and Mac OS X are listed below). Click on Add in order to grant access for a new device.

Note: that the function is enabled or disabled under WLAN->WLAN Settings. Disabling the function does not clear the MAC Address Control List.

Windows

1. Click on the Start button and then Run.

2. Type cmd and press enter.

3. Type ipconfig /all in the command prompt and press enter. The MAC address is found on the

physical address line

Mac OSX

1. Click on the Finder icon, followed by System Preferences.

2. Open the Network icon and click on the relevant interface.

3. Click on Advanced, and the hardware ID will be shown. This is your MAC address.

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Menu System 15

3.5 VPN

The router can be used as a VPN (Virtual Private Network) client. VPN is widely used for connecting to corporate networks from a remote location. The credentials must be given to you by the administrator of the virtual private network.

Note: If your Internet connection should run into any disconnects or strange behavior when using

session intensive protocols (such as BitTorrent) during use of an encrypted PPTP tunnel, then please make sure to enforce a low speed cap on the relevant application. Real-time (MPPE) encryption/decryption is a CPU-intensive task for the router and offers limited bandwidth throughput.

For further information, visit http://www.dovado.com/features/vpn

3.5.1 PPTP

For setting up a VPN with PPTP you need to provide the server's IP-address or hostname, along with login credentials. This should have been provided to you by the system administrator or your VPN service provider. It is sometimes optional to use encryption, referred to as MPPE. The usage of encryption will result in lower throughput as well as higher transmission latency (ping), since each data packet must be encrypted/decrypted.

To enable PPTP select the tick box and enter the VPN Server profile

To create a new VPN Server, click on the drop-down and select Create New Profile and fill out the following settings

Profile Name here you enter the name of the profile eg. MyVPN-Service Server Enter the host-name / IP address to which you want to connect Username The VPN account username with which you want to connect, if you don't know it

please contact your IT administration or your VPN provider Password The VPN account password with which you want to connect, if you don't know it please contact your IT administration or your VPN provider

Echo timeout The PPP echo timeout value, this value is normally 60 seconds Echo count The PPP echo counter value, this value is normally 3 seconds MPPE (encryption) Select if the connection should use encryption or not. Encryption can

have impact on the throughput and latency. By default, encryption is Enabled Default profile Click here if you want that the router automatic should connect with this profile

If VPN goes down Here you select what the router should allow to happen if the VPN disconnects. Either you let the hosts continue to surf on the Internet directly (without VPN), or you decide to block them from accessing the Internet.

Advanced Settings

Number of retries Here you can choose how many attempts the router should try to connect

to the VPN. You can also select that it will continue to do unlimited retries. If the router can't connect within the limit, a manual connect or a reboot of the router will be required

Routing of internal services Here you can select how the router's own traffic should be routed to the Internet; either via the Direct connected interface or the PPTP/VPN tunnel. All traffic that originates from the router such as DNS-lookups, NTP, Live Update checks, etc shall use this interface

Forced VPN Here you can designate which hosts on your network should use the VPN connection. By default, all hosts on the network will use the VPN connection. If you only wish

The Mobile Choice fo r yo ur B ro ad ba nd I nt ern e t

Reference Manual 8.0.016

to permit specific hosts to use the VPN, then click the Specific Host selection. Once added, all other hosts that haven’t been entered shall use the Direct Internet (not VPN).

For debugging any issue with your connection, kindly refer to the the user log (SYSTEM->Log). The log may provide you useful information regarding errors that might occur.

3.6 SMS

Dovado routers support SMS traffic with most USB modems, though not all. To see a list of supported modems, kindly visit http://www.dovado.com/modems

3.6.1 Inbox

This page will display any received messages. It displays the number of the sender along with the message. You can reply to or delete an SMS within this page.

3.6.2 Send

You can compose an SMS message and send it either to a number stored in your router's Phonebook, or to any other number. The telephone number must be entered in the proper international format beginning with a country code; for example 4670xxxxxxx. If you wish to send any messages to a short service number (usually only a few digits long; shorter than a regular telephone number), then tick in the Short Number box above the message.

A regular SMS supports 160 characters, however the Dovado router also supports long text messages, and will display how many messages your inserted text is equivalent to.

3.6.3 Remote Control

A short text command can be sent from your phone to administer certain tasks. The configuration allows a range of authorized mobile phone numbers to be added to the list. You can specify which number will be allowed for sending commands, receiving notifications, or both. To insert the number, use international dialing format (e.g. 46 for Sweden, followed by the rest). For each number that is inserted with its rights, click on Add to list.

Note: For each number that is added (and tagged with a "Notification" tick mark), an individual SMS shall be sent by the router in case of any notification. Using SMS functionality may generate an extra cost to your mobile broadband subscription

3.6.3.1 Remote Commands

+ 36 hidden pages

Dovado pro tinyac Reference Manual

Specifications and Main Features

Frequently Asked Questions

User Manual