Dorel Baby Relax DA7970-1, Baby Relax DA7970-1G, Baby Relax DA7970-1W Instruction Manual

INSTRUCTION MANUAL

Model No:

DA7970-1 (SOFT GRAY)

DA7970-1W (WHITE)

DA7970-1G (GRAPHITE GRAY)

Dresser and Topper

UPC CODE:

0-65857-17923-1 (SOFT GRAY)

0-65857-17924-8 (WHITE)

0-65857-17925-5 (GRAPHITE GRAY)

NOTE:

THIS INSTRUCTION BOOKLET

CONTAINS IMPORTANT SAFETY

INFORMATION. PLEASE READ AND

KEEP FOR FUTURE REFERENCE.

Lot number:

(TAKEN FROM CARTON)

_____________________________________

Date of purchase:

_______ / _______ / _______

DO NOT RETURN PRODUCT TO THE STORE.

If a part is missing or damaged, contact our

customer service department. We will replace the

part FREE of charge.

Tel #: [phone]

E-Mail: [e-mail]

Fax #: [phone]

CUSTOMER SERVICE

NOTES

DO NOT

If you are missing parts or have any questions about this product, contact our customer service representative

CALL 1-800-295-1980

You can also order parts by writing to the address listed below. Please include the product model number, color

and a detailed description of the part.

Customer Service Department No. 413

12345 Albert-Hudon Boulevard, Suite 100

Montreal, Quebec

Canada H1G 3L1

E-MAIL: [e-mail]

WARNING

*

FALL HAZARD - To prevent death or serious injury, always keep child within arm's reach.

*

Avoid serious injury. Never leave child unattended.

*

Read all instructions before use.

*

Keep instructions for future use.

*

DO NOT use the unit if it is damaged or broken.

*

When used as a change table, this unit must be used with a changing pad (not provided) equipped with safety
straps that secure the child to the changing pad as well as straps that secure the pad to the dresser.

*

This unit is to be used with a changing pad measuring 16 inches X 32 inches and not exceeding 2 inches in
thickness (excluding the height of any contoured edges).

*

Always secure the child to the changing pad using safety straps attached to changing pad.

*

The maximum recommended weight of the child is 30 lbs (13.60 kgs).

Serious or fatal crushing injuries can occur from furniture tipover. To help prevent tipover:

* Install tipover restraint provided.
* Place heaviest items in the lower drawers.
* Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product.
* Never allow children to climb or hang on drawers, doors or shelves.
* Never open more than one drawer at a time.
* Do not defeat or remove the drawer interlock system.
* Use of tipover restraints may only reduce, but not eliminate, the risk of tipover.

*

Ensure all parts and components are present before beginning assembly.

*

Assemble on a soft, smooth surface to prevent damage to the product finish.

*

Use the wall safety strap provided to secure the unit to the wall.

*

A Phillips head screw driver is not included.
*
*

CAUTION: Adult assembly required.
*

Assembly will require two people.
*

To avoid unnecessary damage, when levelers have been extended, DO NOT drag across surface when

moving. Be sure to lift and carry the item to its location.
*

Estimated assembly time: 60 minutes.

use power tools.

CARE AND CLEANING

Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean
surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to sunlight and
extreme changes in temperature and moisture can damage wood furniture.

MAINTENANCE

Check bolts/screws periodically and tighten them if necessary.

LIMITED WARRANTY

Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any such
defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon
presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included. This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way. This
warranty gives you specific legal rights and you may also have other rights which vary from State to State.

WARNING: Should this product become damaged, and/or

components are broken or missing, DO NOT USE.

DRESSER AND TOPPER

DA7970-1 / DA7970-1W / DA7970-1G

HARDWARE LIST

1 2 3

CAM BOLT

14 PCS

4 5 6

CAM LOCK

14 PCS

Ø8 X 30mm

WOOD DOWEL

22 PCS

Ø6 X 20mm

CAM BOLT

18 PCS

CAM LOCK

18 PCS

7 8 9

Ø4 X 25mm

SCREW

16 PCS

Ø3.5 X 15mm Ø5/32 X 25mm

SCREW

14 PCS

10 11 12

KNOB
6 PCS

ALLEN KEY

1 PC

13 14

WOOD DOWEL

24 PCS

SHORT BOLT

6 PCS

SAFETY STRAP

1 KIT

Ø1/4" X 3"

BOLT

4 PCS

15 16 17

SPRING WASHER

6 PCS

FLAT WASHER

6 PCS

Ø1/4" X 1"

BOLT

2 PCS

BARREL NUT

4 PCS

DRESSER AND TOPPER

DA7970-1 / DA7970-1W / DA7970-1G

PARTS LIST

A B C D

TOP PANEL

1 PC 1 PC

LEFT SIDE PANEL

RIGHT SIDE PANEL

1 PC

E F G H

FRONT BOTTOM RAIL

1 PC

BACK TOP RAIL

1 PC

1 PC

I J K L

DRAWER FRONT

1 PC

DRAWER FRONT

1 PC

DRAWER FRONT

M N O P

FRONT TOP RAIL

1 PC

BACK BOTTOM PANELBACK TOP PANEL

1 PC

DRAWER LEFT SIDE

3 PCS1PC

DRAWER RIGHT SIDE

3 PCS 3 PCS 3 PCS 3 PCS

DRAWER BACK

Q R S T

LEFT RAIL RIGHT RAIL FRONT RAIL BACK RAIL

1 PC 1 PC 1 PC 1PC

DRAWER BOTTOM

DRAWER BOTTOM RAIL

DRESSER AND TOPPER

DA7970-1 / DA7970-1W / DA7970-1G

STEP 1

Insert cam bolt (1) into the left and right side panel (B & C) using a Phillips head screwdriver (not
included) as shown.

C

B

1 10pcs

DRESSER AND TOPPER

DA7970-1 / DA7970-1W / DA7970-1G

STEP 2

Insert cam locks (2) and wood dowels (3) into the front top and bottom rail (D & E), back top rail
(F) and back bottom panel (H) as shown.
Attach the front top and bottom rail (D & E), back top rail (F) and back bottom panel (H) to left
and right side panels (B & C).
Secure the rails by rotating the cam locks (2) 1/2 turn clockwise using a Phillips head screwdriver
(not included).

B

H

C

F

D

E

2 10 pcs

3 10 pcs

DRESSER AND TOPPER

DA7970-1 / DA7970-1W / DA7970-1G

STEP 3

Insert cam bolts (1) into the top panel (A) as shown.
Insert cam locks (2) into the left and right side panel (B & C) as shown.
Attach top panel (A) to the left and right side panel (B & C) with wood dowels (3) as shown.
Secure the top panel (A) by rotating the cam locks (2) on left and right side panel (B & C) 1/2 turn
clockwise using a Phillips head screwdriver (not included).
Further secure top panel (A) to the assembled unit with screws (7). Use a Phillips head
screwdriver (not included) to tighten screws.

A

B

A

C

E

1 4 PCS
2

4 PCS
4 PCS

3
7

4 PCS

DRESSER AND TOPPER

DA7970-1 / DA7970-1W / DA7970-1G

STEP 4

Attach back top panel (G) to the assembled unit with screws (8) as shown.
Use a Phillips head screwdriver (not included) to tighten the screws.

A

C

8

G

H

8

14 pcs

DRESSER AND TOPPER

10

DA7970-1 / DA7970-1W / DA7970-1G

STEP 5

Insert cam bolts (4) into the drawer fronts (I, J & K) as shown.
Insert wood dowels (6) and cam locks (5) into the drawer left and right sides (L & M) as shown.
Secure the drawer left and right sides (L & M) to drawer fronts (I, J & K) by rotating the cam locks
(5) 1/2 turn clockwise using a Phillips head screwdriver (not included).

4

L

5

5

M

6

12 PCS4
12 PCS

12 PCS6

DRESSER AND TOPPER

10

12 PCS

6

10

6

6

DA7970-1 / DA7970-1W / DA7970-1G

STEP 6

Slide the drawer bottom (O) into the grooves of drawer left and right sides (L & M) and drawer
fronts (I, J & K).
Insert wood dowels (6) and cam locks (5) into the drawer bottom rail (P) as shown. Secure
drawer bottom rail (P) to drawer fronts (I, J & K) by rotating the cam locks (5) 1/2 turn clockwise
using a Phillips head screwdriver (not included).
Insert cam bolt (4) into drawer back (N) as shown.
Insert wood dowels (6) and cam locks (5) into the drawer bottom rail (P) as shown.
Attach drawer back (N) to the drawer sides (L & M) with screws (7). Use a Phillips head
screwdriver (not included) to tighten the screws. Secure drawer bottom rail (P) to drawer back (N)
by rotating the cam locks (5) 1/2 turn clockwise using a Phillips head screwdriver (not included).
Attach knobs (10) to the drawer fronts (I, J & K) with bolts (9) using a Phillips head screwdriver
(not included).

4

O

10

P

6

9

4

5

7

5

N

7

N

P

6

5

12 PCS4
12 PCS

12 PCS6

12 PCS7

6 PCS9

6 PCS10

DRESSER AND TOPPER

DA7970-1 / DA7970-1W / DA7970-1G

STEP 7

Insert all drawers into the assembled unit.

I

J

K

DRESSER AND TOPPER

3

3

DA7970-1 / DA7970-1W / DA7970-1G

STEP 8

Insert wood dowels (3) and barrel nuts (17) into the front rail (S) as shown.
Attach left and right rails (Q & R) to the front rail (S) with bolts (13), spring washers

(15) and flat washers (16).
Use Allen key (11) to tighten the bolts.

13

Q

15

16

17

6

S

17

R

13

15

16

11

13
15

16
17

4 PCS6
2 PCS
2 PCS

2 PCS
2 PCS

DRESSER AND TOPPER

3

3

DA7970-1 / DA7970-1W / DA7970-1G

STEP 9

Insert wood dowels (3) into the back rail as shown.
Insert barrel nuts (17) into the left and right rails (Q & R) as shown.
Attach back rail (T) to the left and right rails (Q & R) with bolts (13), spring washers
(15) and flat washers (16).
Use Allen key (11) to tighten the bolts.

11

13

15

16

11

17

Q

T

13

15

16

6

R

17

S

13
15

16
17

4 PCS6
2 PCS
2 PCS

2 PCS
2 PCS

DRESSER AND TOPPER

DA7970-1 / DA7970-1W / DA7970-1G

STEP 10

Attach the assembled topper to the dresser with bolts (14), spring washers (15) and
flat washers (16). Use Allen key (11) to tighten the bolts.

Q

S

T

15

16

R

14

11

15

16

14

11

13

14

15
16

2 PCS
2 PCS

2 PCS

DRESSER AND TOPPER

DA7970-1 / DA7970-1W / DA7970-1G

CAUTION: This unit is intended for use only with the

products and/or maximum weights indicated. Use with

other products and/or products heavier than the

maximum weights indicated may result in instability or

cause possible injury.

Top panel maximum

weight 30 lbs.

Drawer Maximum

weight 15 lbs.

That's it! You've finished assembling your Dresser and Topper!

DO NOT RETURN PRODUCT TO THE STORE.

If a part is missing or damaged, contact our customer service

department. We will replace the part FREE of charge.

Tel #: [phone]

E-Mail: [e-mail]

Fax #: [phone]

Furniture Wall Safety Strap

FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEAS

A B C D

MOUNTING BRACKET

4 PCS

SAFETY WALL STRAP

2 PCS

LONG SCREW

2 PCS

SHORT SCREW

2 PCS

TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.

WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE
MAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP
BEHIND THE FURNITURE TO ENSURE SAFETY.

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR

E

CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.

Step
1:

Step
2:

Step
3:

Step

ATTACH A MOUNTING BRACKET (A) SECURELY TO THE BACK EDGE OF THE FURNITURE USING THE
SHORT SCREW (D), THROUGH THE SMALLER HOLE.

LOCATE THE OTHER MOUNTING BRACKET (A) ON THE WALL OVER A WALL STUD AND 2 INCHES
BELOW THE MOUNTING BRACKET SECURED TO THE BACK OF YOUR UNIT. ATTACH TO THE WALL
STUD USING THE LONG SCREW (C) PROVIDED, THROUGH THE SMALLER HOLE.

PLACE THE FURNITURE INTO POSITION SO BOTH MOUNTING BRACKETS ARE VERTICALLY IN LINE.
LACE THE END OF THE SAFETY WALL STRAP (B) THROUGH THE LARGER HOLE IN EACH MOUNTING
BRACKET (A). BRING BOTH ENDS TOGETHER AND SLIDE THE FLAT END THROUGH THE LOCKING
END AND DRAW IT THROUGH UNTIL ALL SLACK IS REMOVED.

CONFIRM THAT THE STRAP IS SECURELY LACED AND LOCKED.
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY

REMOVE THE SCREW FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.