Please read this operating manual carefully before starting the device.
Keep it in a safe place for future reference. If the device is passed on to
another person, this operating manual must be handed over to the user
along with it.
The manufacturer cannot be held liable for damage resulting from improper usage
or incorrect operation.
Safety instruction: Failure to observe this instruction can cause fatal or
serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
Supplementary information for operating the product.
2Safety instructions
2.1General safety
!
6
WARNING!
•
Do not operate the cooling device if it is visibly damaged.
•
If this cooling device's power cable is damaged, it must be replaced
by the manufacturer, customer service or a similarly qualified person in
order to prevent safety hazards.
•
This cooling device may only be repaired by qualified personnel.
Improper repairs can lead to considerable hazards.
•
This cooling device can be used by children aged 8 years or over, as
well as by persons with diminished physical, sensory or mental capacities or a lack of experience and/or knowledge, providing they are
supervised or have been taught how to use the cooling device safely
and are aware of the resulting risks.
•
Cleaning and user maintenance must not be carried out by children
without supervision.
•
Children must not play with the cooling device.
EN
CoolFreeze Safety instructions
•
Children must be supervised to ensure that they do not play with the
cooling device.
•
Always keep and use the cooling device out of the reach of children
under the age of 8 years.
•
Do not store any explosive substances such as spray cans with a
flammable propellant in the cooling device.
CAUTION!
•
!
A
Disconnect the cooling device from the power supply
– before each cleaning and maintenance
– after every use
•
Food may only be stored in its original packaging or in suitable
containers.
NOTICE!
•
Check that the voltage specification on the type plate corresponds to
that of the energy supply.
•
Only connect the cooling device to a DC power supply in the vehicle
with the DC cable.
•
Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the vehicle
– Or with the AC connection cable to the AC power supply
•
Connect the cooling device with the AC connection cable to the AC
power supply.
•
Never pull the plug out of the socket by the cable.
•
If the cooling device is connected to the DC outlet: Disconnect the
cooling device and other power consuming devices from the battery
before connecting a quick charging device.
•
If the cooling device is connected to the DC outlet: Disconnect the
cooling device or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
•
The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
•
The insulation of the cooling device contains flammable cyclopentane
and requires special disposal procedures. Deliver the cooling device
at the end of its life-cycle to an appropriate recycling.
7
EN
Scope of deliveryCoolFreeze
2.2Operating the cooling device safely
CAUTION!
•
!
A
Before starting the cooling device, ensure that the power supply line
and the plug are dry.
NOTICE!
•
Do not use electrical devices inside the cooling device unless they are
recommended by the manufacturer for the purpose.
•
Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
•
Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that
arises during operation does not build up. Make sure that the cooling
device is sufficiently far away from walls and other objects so that the
air can circulate.
•
Ensure that the ventilation openings are not covered.
•
Do not fill the inner container with ice or fluid.
•
Never immerse the cooling device in water.
•
Protect the cooling device and the cable against heat and moisture.
3Scope of delivery
•
Compressor cooler
•
Connection cable for DC connection
•
Connection cable for AC connection
•
Operating manual
•
Shoulder strap (CF11)
8
EN
CoolFreeze Intended use
4Intended use
The compressor cooler CF11, CF16, CF26 is suitable for refrigerating and freezing
foodstuffs.
The compressor cooler has been designed for operation using a 12/24 Vg onboard socket of a car (DC socket) or caravan as well as an AC mains supply.
The compressor cooler can also be used for camping. The compressor cooler may
not be exposed to rain.
CAUTION! Health hazard!
!
Please check if the cooling capacity of the compressor cooler is suitable
for storing the food or medicine you wish to cool.
5Technical description
The cooler can chill products, keep them cool as well as freeze them. A
maintenance-free refrigerant circuit with compressor provides the cooling.
The cooler is portable.
For use in vehicles, the cooling device can be secured with a safety belt (CF 11).
When used on boats, the cooler can withstand a constant heel (inclination) of 30°.
An integrated battery monitor can be switched on to protect your vehicle battery
from discharging to dangerously low levels (see chapter “Using the battery monitor”
on page 14).
9
EN
Technical descriptionCoolFreeze
5.1Operating and display elements
Control panel (fig. 1, page 3, fig. 2, page 3)
Item DescriptionExplanation
1ON/OFF buttonSwitches the cooling device on or off when the button is
pressed for between one and two seconds
2POWEROperating display
LED lights up greenCompressor is on; set
temperature not yet reached
LED lights up orangeSet temperature has been
reached
LED flashes orangeVoltage is too low
3ERRORLED flashes red:Device is switched on but
not ready for operation
4SETSelects the input mode
•
Setting the temperature
•
Set temperature unit (°Celsius or °Fahrenheit)
•
Set the battery monitor
5DisplayDisplays the temperature in the refrigerator compartment
The first three digits of the four-digit display show the temperature, the fourth digit indicates the temperature unit
(°C or °F).
When an error occurs, the display shows “Err1” or “Err2”.
6+Press once to increase the selected value
7–Press once to decrease the selected value
10
EN
CoolFreeze Operation
6Operation
The cooling device is equipped with an LED interior light that remains on when the
voltage is applied. The energy consumption of the LED interior light is extremely low
and is negligible compared to the total energy consumption of the device.
6.1Before initial use
NOTE
I
6.2Energy saving tips
•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the device to keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the lid open for longer than necessary.
•
Defrost the cooling device as soon as a layer of ice forms.
•
Avoid unnecessarily low temperature settings.
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (see also
chapter “Cleaning and maintenance” on page 16).
6.3Locking the cooling device
➤ Close the lid.
➤ Press the latch (fig. 3 1, page 3) down, until it latches in place audibly.
6.4Connecting the cooling device
Connection to the DC socket
NOTE
I
➤ Place the cooler on a firm base.
Make sure that the ventilation slots are not covered and that the heated air can be
dissipated.
➤ Connect the 12/24 V connection cable to the DC socket in the vehicle.
If you connect the cooler to the DC socket, remember that the ignition
must be turned on to supply it with power.
11
EN
OperationCoolFreeze
Connecting to a 100 – 240 V AC mains (e.g. at home or in the office)
DANGER! Danger of electrocution
•
D
The cooling device has a built-in multi-voltage mains adapter with a priority circuit for
connecting to a 100 – 240 V AC supply. The priority circuit automatically switches to
mains operation if the appliance is connected to a 100 – 240 V AC supply, even if the
12/24 V cable is still connected.
➤ Plug the 100 – 240 V connection cable into the device AC voltage socket and
connect it to the 100 – 240 V AC voltage mains.
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
•
If you are operating your cooler on board a boat with an AC mains
connection of 100 – 240 V from the land, you must install a residual
current circuit breaker between the 100 – 240 V AC mains supply
and the cooler.
Seek advice from a trained technician.
6.5Secure the cooling device in the vehicle (CF11)
➤ Open the lid of the cooling device.
➤ Place the safety strap into the guide (fig. 4 1, page 4) of the cooling device.
➤ Close the lid.
➤ Engage the safety strap and tighten it.
6.6Switch on the cooling device (fig. 1, page 3, fig. 2,
page 3)
NOTICE! Risk of damage!
•
A
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Ensure that the ventilation slots are not
covered. Make sure that the device is sufficiently far away from walls
and other objects so that the air can circulate.
•
Ensure that the items placed in the cooler are suitable for cooling to
the selected temperature.
•
Disconnect the cooler and other electric consumers from the battery
before you connect the battery to a quick charging device. Overvoltage can damage the electronics of the device.
12
Loading...
+ 24 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.