Dometic 441003.701, 441003A701 Installation Instructions Manual

RECORD THIS INFORMATION FOR FUTURE
REFERENCE:

Model Number
Serial Number
Date Purchased

Self-Contained Unit

Description Model

Heat Pump 441003.701

441003A701

INSTALLATION

INSTRUCTIONS

This Unit is designed for OEM installation. All initial installations must be approved by Dometic Corporation.

Read these instructions carefully. These
instructions MUST stay with this product.

REVISION C

Form No. 3314102.000 08/16
(French 3314103.000_C)
©2016 Dometic Corporation
LaGrange, IN 46761

USA

SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514

CANADA

Dometic Corporation
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA

SERVICE CENTER &
DEALER LOCATIONS
Please Visit:

www.eDometic.com

INTRODUCTION

This heat pump (hereinafter referred to as “unit” or “product”) is designed and intended for installation in a small Recreational
Vehicle (hereinafter referred to as RV) during the time it is manufactured. It is recommended that the RV interior space be
essentially one undivided space.

Use these instructions to ensure a properly installed, and properly functioning product.

Dometic Corporation reserves the right to modify appearances and specications without notice.

TABLE OF CONTENTS

INTRODUCTION .................................................................................................................................................................... 2

DOCUMENT SYMBOLS ........................................................................................................................................................2

IMPORTANT SAFETY INSTRUCTIONS ................................................................................................................................3

A. Recognize Safety Information ...................................................................................................................................3

B. Understand Signal Words ..........................................................................................................................................3

C. Supplemental Directives ............................................................................................................................................3

D. General Safety Messages .........................................................................................................................................3

GENERAL INFORMATION .....................................................................................................................................................4

A. Required Tools ...........................................................................................................................................................4

B. Heat Gain ..................................................................................................................................................................4

C. Unit Functions ............................................................................................................................................................4

D. Condensation ............................................................................................................................................................4

E. Drain Tube .................................................................................................................................................................4

F. Heat Pump Operation ................................................................................................................................................ 4

SPECIFICATIONS .................................................................................................................................................................. 5

A. Table - Unit Data ........................................................................................................................................................5

B. Interior Compartment/Sidewall Opening Requirements ............................................................................................5

INSTALLATION INSTRUCTIONS ..........................................................................................................................................6

A. Choosing Proper Location For Unit ...........................................................................................................................6

B. Grilles And Registers ................................................................................................................................................. 6

C. Opening Preparation .................................................................................................................................................6

D. Wiring Requirements .................................................................................................................................................7

E. Choosing Thermostat Location ..................................................................................................................................7

F. Installing Unit ............................................................................................................................................................. 7

G. Wiring System ...........................................................................................................................................................8

H. Thermostat And Communication Cable Installation ...................................................................................................8

I. System Checkout ......................................................................................................................................................9

WIRING DIAGRAM ................................................................................................................................................................9

A. Unit Wiring Diagram - Earlier Version ........................................................................................................................9

B. Unit Wiring Diagram - Later Version ........................................................................................................................10

INSTALLATION COMPONENTS .......................................................................................................................................... 10

DOCUMENT SYMBOLS

Indicates additional information that is NOT related
to physical injury.

Indicates step-by-step instructions.

2

IMPORTANT SAFETY INSTRUCTIONS

This manual has safety information and instructions to help
you eliminate or reduce the risk of accidents and injuries.

A. Recognize Safety Information

This is the safety alert symbol. It is used to
alert you to potential physical injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.

B. Understand Signal Words

A signal word will identify safety messages and
property damage messages, and will indicate the
degree or level of hazard seriousness.

 indicates a hazardous situation that,
if NOT avoided, could result in death or serious in­jury.

 indicates a hazardous situation that,
if NOT avoided, could result in minor or moderate
injury.

 is used to address practices NOT
related to physical injury.

C. Supplemental Directives

Read and follow all safety information and
instructions to avoid possible injury or death.

Read and understand these instructions be­fore [installing / using / servicing / performing
maintenance on] this product.

Incorrect [installation / operation / servicing /
maintaining] of this product can lead to seri­ous injury. Follow all instructions.

The installation MUST comply with all ap­plicable local and national codes, including
the latest edition of the following standards:

U.S.A.

● ANSI/NFPA70, National Electrical Code
(NEC)

● ANSI/NFPA 1192, Recreational Vehicles
Code

CANADA

● CSA C22.1, Parts l & ll, Canadian Electri-
cal Code

● CSA Z240 RV Series, Recreational
Vehicles

D. General Safety Messages

 Failure to obey the following warn­ings could result in death or serious injury:

● This product MUST be [installed / serviced] by a

qualied service technician.

● Do NOT modify this product in any way. Modica-
tion can be extremely hazardous.

● Do NOT add any devices or accessories to this

product except those specically authorized in

writing by Dometic Corporation.

3