Dodge Durango 2019 Owner's Manual

2019
OWNER’S MANUAL
Durango
VEHICLES SOLD IN CANADA
With respect to any Vehicles Sold in Canada, the name FCA US LLC shall be deemed to be deleted and the name FCA Canada Inc. used in substitution therefore.
DRIVING AND ALCOHOL
Drunken driving is one of the most frequent causes of accidents.
Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non­drinking driver, call a cab, a friend, or use public trans­portation.
WARNING!
Driving after drinking can lead to an accident. Your perceptions are less sharp, your reflexes are slower, and your judgment is impaired when you have been drinking. Never drink and then drive.
This manual illustrates and describes the operation of features and equipment that are either standard or op­tional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle.
FCA US LLC reserves the right to make changes in design and specifications, and/or make additions to or improve­ments to its products without imposing any obligation upon itself to install them on products previously manu­factured.
Copyright © 2018 FCA US LLC
SECTION PAGE
INTRODUCTION ...................................................................3
1
GRAPHICAL TABLE OF CONTENTS ......................................................7
2
GETTING TO KNOW YOUR VEHICLE ...................................................13
3
GETTING TO KNOW YOUR INSTRUMENT PANEL .........................................143
4
SAFETY ........................................................................173
5
TABLE OF CONTENTS
1 2 3 4 5
STARTING AND OPERATING .........................................................259
6
IN CASE OF EMERGENCY ...........................................................371
7
SERVICING AND MAINTENANCE .....................................................415
8
TECHNICAL SPECIFICATIONS ........................................................477
9
MULTIMEDIA ....................................................................491
10
CUSTOMER ASSISTANCE ............................................................573
11
INDEX ..........................................................................579
12
6 7 8 9 10
11
12

INTRODUCTION

CONTENTS
INTRODUCTION .........................4
1
ROLLOVER WARNING .....................5
HOW TO USE THIS MANUAL ...............5
Essential Information ......................5
Symbols ...............................5
WARNINGS AND CAUTIONS ................6
VEHICLE MODIFICATIONS/ALTERATIONS .....6
4 INTRODUCTION

INTRODUCTION

Dear Customer, congratulations on selecting your new vehicle. Be assured that it represents precision workman­ship, distinctive styling, and high quality.
This is a specialized utility vehicle. It can go places and perform tasks that are not intended for conventional pas­senger vehicles. It handles and maneuvers differently from many passenger vehicles both on-road and off-road, so take time to become familiar with your vehicle. If equipped, the two-wheel drive version of this vehicle was designed for on-road use only. It is not intended for off-road driving or use in other severe conditions suited for a four-wheel drive vehicle. Before you start to drive this vehicle, read the Owner’s Manual. Be sure you are familiar with all vehicle controls, particularly those used for brak­ing, steering, transmission, and transfer case shifting. Learn how your vehicle handles on different road surfaces. Your driving skills will improve with experience. When driving off-road, or working the vehicle, don’t overload the vehicle or expect the vehicle to overcome the natural laws of physics. Always observe federal, state, provincial and local laws wherever you drive. As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control or a collision. Refer to the “Driving Tips” in “Starting and Operating” for further information.
This Owner’s Manual has been prepared with the assis­tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and customer oriented documents. In the attached Warranty Booklet you will find a description of the services that FCA offers to its customers, the Warranty Certificate and the details of the terms and conditions for maintaining its validity. Please take the time to read all of these publications carefully before driving your vehicle for the first time. Following the instructions, recommendations, tips, and important warn­ings in this manual will help assure safe and enjoyable operation of your vehicle.
This Owner’s Manual describes all versions of this vehicle. Options and equipment dedicated to specific markets or versions are not expressly indicated in the text. Therefore, you should only consider the information which is related to the trim level, engine, and version that you have purchased. Any content introduced throughout the Own­er’s Information, that may or may not be applicable to your vehicle, will be identified with the wording “If Equipped”. All data contained in this publication are intended to help you use your vehicle in the best possible way. FCA aims at a constant improvement of the vehicles produced. For this reason, it reserves the right to make changes to the model
described for technical and/or commercial reasons. For further information, contact an authorized dealer.
If applicable, refer to the Owner’s Manual Supplement for related information.
NOTE: After reviewing the Owner’s Information, it should be stored in the vehicle for convenient referencing, and remain with the vehicle when sold.
When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained techni­cians and genuine MOPAR® parts, and cares about your satisfaction.
HOW TO USE THIS MANUAL Essential Information
Consult the Table of Contents to determine which section contains the information you desire.
Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustra­tions may differ from your vehicle’s equipment.
The detailed index at the back of this Owner’s Manual contains a complete listing of all subjects.
INTRODUCTION 5

Symbols

Some vehicle components have colored labels whose sym­bols indicate precautions to be observed when using this component. Refer to “Warning Lights and Messages” in “Getting To Know Your Instrument Panel” for further information on the symbols used in your vehicle.

ROLLOVER WARNING

Utility vehicles have a significantly higher rollover rate than other types of vehicles. This vehicle has a higher ground clearance and a higher center of gravity than many passenger vehicles. It is capable of performing better in a wide variety of off-road applications. Driven in an unsafe manner, all vehicles can go out of control. Because of the higher center of gravity, if this vehicle is out of control it may roll over while some other vehicles may not.
1
6 INTRODUCTION
Do not attempt sharp turns, abrupt maneuvers, or other unsafe driving actions that can cause loss of vehicle con­trol. Failure to operate this vehicle safely may result in a collision, rollover of the vehicle, and severe or fatal injury. Drive carefully.
Rollover Warning Label
Failure to use the driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million annually. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up.

WARNINGS AND CAUTIONS

This Owner’s Manual contains WARNINGS against oper­ating procedures that could result in a collision, bodily injury and/or death. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information. Observe all Warnings and Cau­tions.

VEHICLE MODIFICATIONS/ALTERATIONS

WARNING!
Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.

GRAPHICAL TABLE OF CONTENTS

CONTENTS
FRONT VIEW ............................8
2
INSTRUMENT PANEL .....................10
REAR VIEW .............................9
INTERIOR ..............................11
8 GRAPHICAL TABLE OF CONTENTS

FRONT VIEW

Front View
1 — Doors 4 — Wheels/Tires 2 — Exterior Mirrors 5 — Hood/Engine Compartment 3 — Windshield 6 — Headlights

REAR VIEW

1 — Rear Lights 2 — Rear Windshield Wiper 3 — Liftgate Handle
GRAPHICAL TABLE OF CONTENTS 9
2
Rear View
10 GRAPHICAL TABLE OF CONTENTS

INSTRUMENT PANEL

Instrument Panel
1 — Instrument Cluster Display Controls 6 — Ignition 2 — Paddle Shifters 7 — Climate Controls 3 — Multifunction Lever (Behind Steering Wheel) 8 — Uconnect System 4 — Instrument Cluster 9 — Switch Panel 5 — Speed Controls 10 — Glove Compartment

INTERIOR

Interior
1 — Door Locks 4 — Seats 2 — Window Switches 5 — Gear Selector 3 — Door Handles 6 — USB/AUX Media Hub
GRAPHICAL TABLE OF CONTENTS 11
2

GETTING TO KNOW YOUR VEHICLE

CONTENTS
VEHICLE USER GUIDE — IF EQUIPPED .......17
KEYS .................................19
KeyFob..............................19
IGNITION SWITCH .......................24
Keyless Push Button Ignition ...............24
Ignition Or Accessory On Message ...........25
Dead Key Fob Battery ....................26
REMOTE START — IF EQUIPPED .............26
How To Use Remote Start .................26
Remote Start Abort Message — If Equipped ....27
To Enter Remote Start Mode ................28
To Exit Remote Start Mode Without Driving The
Vehicle ...............................28
To Exit Remote Start Mode And Drive The
Vehicle ...............................28
Remote Start Comfort Systems — If Equipped . . .29
3
General Information .....................29
SENTRY KEY ...........................29
Key Programming ......................30
Replacement Keys .......................30
General Information .....................30
VEHICLE SECURITY ALARM — IF EQUIPPED . . .31
To Arm The System .....................31
To Disarm The System ...................31
Rearming Of The System ..................32
Tamper Alert ...........................33
DOORS ...............................33
Manual Door Locks .....................33
Power Door Locks ......................34
14 GETTING TO KNOW YOUR VEHICLE
Keyless Enter-N-Go — Passive Entry .........35
Head Restraints — Rear Seats ...............65
Automatic Unlock On Exit Feature
— If Equipped .........................40
Automatic Door Locks — If Equipped .........40
Child-Protection Door Lock System
— Rear Doors .........................40
SEATS ................................41
Manual Adjustment (Front Seats) ............42
Manual Adjustment (Rear Seats) .............45
Power Adjustment (Front Seats) — If Equipped . .52
Power Passenger Seat Adjustment
— If Equipped .........................54
Driver Memory Seat — If Equipped ..........55
Heated Seats — If Equipped ...............58
Front Ventilated Seats — If Equipped .........61
HEAD RESTRAINTS ......................62
Supplemental Active Head Restraints — Front
Seats.................................62
Head Restraint Removal — Rear Seats .........65
Power Folding Third Row Head Restraints......66
STEERING WHEEL .......................67
Manual Tilt/Telescoping Steering Column
— If Equipped .........................67
Power Tilt/Telescoping Steering Column
— If Equipped..........................68
Heated Steering Wheel — If Equipped.........69
MIRRORS ..............................70
Inside Day/Night Mirror — If Equipped ......70
Automatic Dimming Mirror — If Equipped .....70
Outside Mirrors ........................71
Outside Automatic Dimming Mirrors — If
Equipped .............................71
Power Mirrors .........................72
Heated Mirrors — If Equipped .............73
Tilt Side Mirrors In Reverse (Available With
Memory Seat Only) — If Equipped ...........73
Illuminated Vanity Mirrors ................73
EXTERIOR LIGHTS .......................74
Multifunction Lever ......................74
Headlight Switch .......................74
Daytime Running Lights — If Equipped .......75
High/Low Beam Switch ..................75
Automatic High Beam — If Equipped ........75
Flash-To-Pass ..........................76
Automatic Headlights ....................76
Parking Lights And Panel Lights ............76
Headlights On Automatically With Wipers .....77
Headlight Delay ........................77
Lights-On Reminder .....................77
Fog Lights — If Equipped .................77
Turn Signals ...........................78
GETTING TO KNOW YOUR VEHICLE 15
Lane Change Assist — If Equipped ..........78
Battery Saver ..........................78
INTERIOR LIGHTS .......................79
Courtesy Lights .........................79
WINDSHIELD WIPERS AND WASHERS ........81
Windshield Wiper Operation................82
Rain Sensing Wipers — If Equipped ..........84
Rear Window Wiper/Washer ...............86
CLIMATE CONTROLS .....................86
Automatic Climate Control Overview .........87
Climate Control Functions.................100
Automatic Temperature Control (ATC) .......101
Operating Tips ........................102
WINDOWS ............................104
Power Windows .......................104
Wind Buffeting ........................107
POWER SUNROOF
— IF EQUIPPED .........107
3
16 GETTING TO KNOW YOUR VEHICLE
Opening Sunroof .......................108
Programming A Rolling Code ..............117
Closing Sunroof ........................108
Wind Buffeting ........................108
Sunshade Operation ....................109
Pinch Protect Feature ....................109
Sunroof Maintenance ....................109
Ignition Off Operation ...................109
Calibration Procedure ....................109
HOOD ...............................110
Opening The Hood......................110
Closing The Hood ......................111
LIFTGATE .............................111
Power Liftgate — If Equipped .............111
Cargo Area Features ....................113
GARAGE DOOR OPENER — IF EQUIPPED ....115
Before You Begin Programming HomeLink .....116
Programming A Non-Rolling Code...........118
Canadian/Gate Operator Programming .......119
Using HomeLink .......................120
Security..............................120
Troubleshooting Tips ....................120
General Information .....................121
INTERNAL EQUIPMENT ..................122
Storage ..............................122
Cupholders ..........................127
Electrical Power Outlets ..................130
Power Inverter — If Equipped .............134
Sunglasses Bin
Door ....................135
ROOF LUGGAGE RACK — IF EQUIPPED ......135
Deploying The Crossbars .................136
Stowing The Crossbars ...................139

VEHICLE USER GUIDE — IF EQUIPPED

Access your Owner ’s Information right through your Uconnect 4C or 4C NAV touchscreen system — If Equipped.
To access the Vehicle User Guide on your Uconnect Touch­screen: Press the Uconnect Apps button. From there, press the Vehicle User Guide icon on your touchscreen. No Uconnect registration is required.
GETTING TO KNOW YOUR VEHICLE 17
3
Uconnect 4C NAV With 8.4–inch Display Vehicle User
Guide Touchscreen Icon
NOTE: Vehicle User Guide features are not available while
the vehicle is moving. If you try to access while the vehicle is in motion, the system will display: Feature not available while the vehicle is in motion.
18 GETTING TO KNOW YOUR VEHICLE
Pre-Installed Features
Your User Guide — Up­dated in real-time
Available when and where
you need it Touchscreen convenience Customizable interface Maintenance schedules
Multilingual and information
Comprehensive icon & symbol glossary
Once you launch your Vehicle User Guide, you will be able to explore your warranty information and radio manual when and where you need them. Your Uconnect system displays the Vehicle User Guide on your touchscreen radio to assist in better understanding your vehicle. There’s no app to download, no phone to connect and no external device needed for playback. Plus, it’s updated throughout the year, in real-time, so it never goes out of date.
Features/Benefits
Pre-installed on your Uconnect touchscreen radio
Enhanced search and browsing capability
Robust NAV application — If Equipped
Add selected topics to a fast-access Favorites category
Icon and symbol glossary
Warranty information
Crucial driver information and assistance:
Operating Instructions Maintenance Schedules Warranty Information Emergency Procedures Fluid Level Standards 911 Contact and More
Tip: When viewing a topic, tap the star icon to add it to your Favorites, for easy access in the future.
KEYS Key Fob
Your vehicle uses a keyless ignition system. The ignition system consists of a key fob with Remote Keyless Entry (RKE) and a START/STOP push button ignition system. The Remote Keyless Entry system consists of a key fob and Keyless Enter-N-Go feature if equipped.
NOTE: The key fob may not be found if it is located next to a mobile phone, laptop or other electronic device; these devices may block the key fob’s wireless signal.
The key fob also includes an emergency key, which stores in the rear of the key fob.
The emergency key allows for entry into the vehicle should the battery in the vehicle or the key fob go dead. The emergency key is also for locking the glove compartment. You can keep the emergency key with you when valet parking.
To remove the emergency key, slide the mechanical latch at the top of the key fob sideways with your thumb and then pull the key out with your other hand.
GETTING TO KNOW YOUR VEHICLE 19
3

Key Fob

Emergency Key Removal
20 GETTING TO KNOW YOUR VEHICLE
NOTE: You can insert the double-sided emergency key into the lock cylinders with either side up.
NOTE: In case the ignition switch does not change with the push of a button, the key fob may have a low or dead battery. In this situation, a back up method can be used to operate the ignition switch. Put the nose side of the key fob (side opposite of the Emergency Key) against the ENGINE START/STOP button and push to operate the ignition switch.
To Unlock The Doors And Liftgate
Push and release the unlock button on the key fob once to unlock the driver’s door or twice within five seconds to unlock all doors and the liftgate.
All doors can be programmed to unlock on the first push of the unlock button. Refer to “Uconnect Settings” in “Multi­media” for further information.
NOTE: If the vehicle is unlocked by a key fob, and no door is opened within 60 seconds, the vehicle will re-lock and if equipped, the security alarm will arm.
The turn signal lights will flash twice to acknowledge the unlock signal. The illuminated entry system will be acti­vated.
1st Push Of Key Fob Unlock Button
This feature lets you program the system to unlock either the driver’s door or all doors on the first push of the unlock button on the key fob. To change the current setting, refer to “Uconnect Settings” in “Multimedia” for further infor­mation.
NOTE: If the vehicle is equipped with Passive Entry, refer to “Keyless Enter-N-Go — Passive Entry” located in “Doors” in “Getting To Know Your Vehicle” for further information.
To Lock The Doors And Liftgate
Push and release the lock button on the key fob to lock all doors and liftgate.
The turn signal lights will flash and the horn will chirp to acknowledge the signal. Refer to “Uconnect Settings” located in “Multimedia” for further programmable infor­mation.
If the vehicle is equipped with Passive Entry, refer to “Keyless Enter-N-Go — Passive Entry” located in “Doors” in “Getting To Know Your Vehicle” for further information.
Vehicles Equipped With Keyless Enter-N-Go — Passive Entry
If one or more doors are open, or the liftgate is open, the doors will lock. The doors will unlock again automatically if the key is left inside the passenger compartment, other­wise the doors will stay locked.
Replacing The Battery In The Key With Remote Control
The recommended replacement battery is one CR2032 battery.
NOTE:
Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for fur­ther information.
Do not touch the battery terminals that are on the back housing or the printed circuit board.
GETTING TO KNOW YOUR VEHICLE 21
1. Remove the emergency key by sliding the mechanical latch on the back of the key fob sideways with your thumb and pull the emergency key out with your other hand.
3
Emergency Key Removal
1 — Emergency Key Release Button 2 — Emergency Key
22 GETTING TO KNOW YOUR VEHICLE
2. Separate the key fob halves using the tip of the emer­gency key, a #2 flat blade screwdriver, or a coin and gently pry the two halves of the key fob apart. Make sure not to damage the seal during removal.
Emergency Key Removal
Separating Case With A Coin
GETTING TO KNOW YOUR VEHICLE 23
Programming Additional Key Fobs
Programming the key fob may be performed by an autho­rized dealer.
Key Fob Battery Replacement
3. Remove the battery by turning the back cover over (battery facing downward) and tapping it lightly on a solid surface such as a table or similar and replace the battery. When replacing the battery, match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol.
4. To assemble the key fob case, snap the two halves together.
NOTE: Once a key fob is programmed to a vehicle, it cannot be repurposed and reprogrammed to another ve­hicle.
Request For Additional Remote Controls
NOTE: Only key fobs that are programmed to the vehicle
electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to any other vehicle.
WARNING!
Always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unattended.
For vehicles equipped with Keyless Enter-N-Go — Ignition, always remember to place the ignition in the OFF mode.
Duplication of key fobs may be performed at an authorized dealer. This procedure consists of programming a blank key fob to the vehicle electronics. A blank key fob is one that has never been programmed.
3
24 GETTING TO KNOW YOUR VEHICLE
NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to an authorized dealer.
General Information
The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, in­cluding interference that may cause undesired opera­tion.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IGNITION SWITCH Keyless Push Button Ignition
This feature allows the driver to operate the ignition with the push of a button, as long as the key fob is in the passenger compartment.
The Keyless Push Button Ignition has three operating modes which are labeled and will illuminate when in position. The three modes are OFF, ACC, and ON/RUN.

Keyless Push Button Ignition

1 — OFF 2 — ACC 3 — ON/RUN
NOTE: In case the ignition switch does not change with the push of a button, the key fob may have a low or dead battery. In this situation, a back up method can be used to operate the ignition switch. Put the nose side of the key fob (side opposite of the Emergency Key) against the ENGINE START/STOP button and push to operate the ignition switch.

Ignition Or Accessory On Message

Upon opening the driver’s door when the ignition is in ACC or ON (engine not running), a chime will sound to remind you to place the ignition in the OFF mode. In addition to the chime, the ignition or accessory on message will display in the cluster.
NOTE: With the Uconnect system, the power window switches, radio, power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition is cycled to the OFF position. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to “Uconnect Settings” in “Multime­dia” for further information.
GETTING TO KNOW YOUR VEHICLE 25
WARNING!
Before exiting a vehicle, always shift the automatic transmission into PARK and apply the parking brake. Always make sure the keyless ignition node is in the “OFF” mode, remove the key fob from the vehicle and lock the vehicle.
Never leave children alone in a vehicle, or with access to an unlocked vehicle.
Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector.
Do not leave the key fob in or near the vehicle, or in a location accessible to children, and do not leave the ignition of a vehicle equipped with Keyless Enter­N-Go in the ACC or ON/RUN mode. A child could operate power windows, other controls, or move the vehicle.
Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.
3
26 GETTING TO KNOW YOUR VEHICLE
CAUTION!
An unlocked vehicle is an invitation. Always remove the key fobs from vehicle, place the ignition in the OFF position and lock all doors when leaving the vehicle unattended.

Dead Key Fob Battery

Key Not Detected Feature
If the ignition position does not change with a push of the ignition button, and the instrument cluster display mes­sage “Key Fob Not Detected” is being displayed, the key fob may have a low or dead battery. In this situation, a back up method can be used to operate the keyless push button ignition. Put the nose side (side opposite of the emergency key) of the key fob against the keyless ignition push button and push to operate the ignition. Once the starter engages and the engine starts remove the key fob from the keyless ignition push button.
Low Or Dead Key Fob Battery Starting Procedure
REMOTE START — IF EQUIPPED How To Use Remote Start
This system uses the key fob to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of approximately 300 ft (91 m).
NOTE:
The vehicle must be equipped with an automatic trans­mission to be equipped with Remote Start.
Obstructions between the vehicle and key fob may reduce this range.
All of the following conditions must be met before the engine will remote start:
Gear Selector in PARK
Doors closed
Hood closed
Liftgate closed
Hazard switch off
Brake switch inactive (brake pedal not pushed)
Battery at an acceptable charge level
PANIC button not pushed
System not disabled from previous remote start event
Vehicle alarm system indicator flashing
Ignition in STOP/OFF position
Fuel level meets minimum requirement
GETTING TO KNOW YOUR VEHICLE 27
Vehicle security alarm is not signaling an intrusion
WARNING!
Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monox­ide (CO) which is odorless and colorless. Carbon Monoxide is poisonous and can cause serious injury or death when inhaled.
Keep key fobs away from children. Operation of the Remote Start System, windows, door locks or other controls could cause serious injury or death.

Remote Start Abort Message — If Equipped

The following messages will display in the instrument cluster display if the vehicle fails to remote start or exits remote start prematurely:
Remote Start Aborted — Door Open
Remote Start Aborted — Hood Open
Remote Start Aborted — Liftgate Open
Remote Start Aborted — Fuel Low
Remote Start Disabled — Start Vehicle To Reset
3
28 GETTING TO KNOW YOUR VEHICLE
The Remote Start Abort message stays active until the ignition is turned to the ON/RUN position.

To Enter Remote Start Mode

Push and release the remote start button on the key fob twice within five seconds. The vehicle doors will lock, the parking lights will flash, and the horn will chirp twice (if programmed). Then, the engine will start, and the vehicle will remain in the Remote Start mode for a 15-minute cycle.
NOTE:
If an engine fault is present or fuel level is low, the vehicle will start and then shut down in 10 seconds.
The park lamps will turn on and remain on during Remote Start mode.
For security, power window and power sunroof opera­tion (if equipped) are disabled when the vehicle is in the Remote Start mode.
The engine can be started two consecutive times with the key fob. However, the ignition must be cycled by pushing the START/STOP button twice (or the ignition switch must be cycled to the ON/RUN position) before you can repeat the start sequence for a third cycle.

To Exit Remote Start Mode Without Driving The Vehicle

Push and release the remote start button one time or allow the engine to run for the entire 15-minute cycle.
NOTE: To avoid unintentional shutdowns, the system will disable with a one time push of the remote start button for two seconds after receiving a valid remote start request.

To Exit Remote Start Mode And Drive The Vehicle

Before the end of 15-minute cycle, push and release the unlock button on the key fob to unlock the doors, or unlock the vehicle using Keyless Enter-N-Go — Passive Entry via the door handles, and disarm the vehicle security alarm (if equipped). Then, prior to the end of the 15-minute cycle, push and release the START/STOP button.
NOTE: For vehicles equipped with the Keyless Enter­N-Go — Passive Entry feature, the message “Remote Start Active — Push Start Button” will display in the instrument cluster display until you push the ignition START button.
Loading...
+ 568 hidden pages