Page 1
WIRELESS RECEIVERS
▸ 1100D/1100DH/1100DI
Receiver for XT Series™
Panels
▸ 1100X/1100XH
Receiver for XR Series™
Panels
FIND US AT @DMPALARMS ON MOST SOCIAL PLATFORMS
1100 Series™ Wireless
RECEIVERS, REPEATERS & TRANSLATORS
▸ 1100R
Repeater for XT, XTL, and XR
Series Panels
▸ 1100DE
Encrypted Wireless
Receiver for XT Series Panels
▸ 1100DHE
Encrypted Wireless High
Power Receiver for XT
Series Panels
▸ 1100XE
Encrypted Wireless
Receiver for XR Series
Panels
▸ 1100XHE
Encrypted Wireless High
Power Receiver for XR
Series Panels
▸ 1100RE
Encrypted Wireless
Repeater for XT, XTL, and
XR Series Panels
▸ 1100T
Wireless Translator
▸ 1100TF
Wireless Translator with
24-hour Standby Battery
Backup
FEATURES
▸ Frequency-hopping 900 MHz
spread-spectrum technology
▸ Seamless integration with
DMP panels and other
hardwired devices
▸ Simple programming
▸ Superior range
▸ Two-WayTM supervised
wireless communication
▸ 3-, 60- or 240-minute
supervision window,
selectable by zone or
output to maximize
eectiveness
▸ Extended range with the
1100DH and 1100XH
▸ Attractive and durable
plastic housing for all units
▸ Internal antenna
Page 2
FIND US AT @DMPALARMS ON MOST SOCIAL PLATFORMS
DMP OFFERS INCREASED SECURITY
Two-Way supervised wireless repeaters
and receivers from DMP deliver
unparalleled flexibility and simplicity
while processing every system message
eciently. Whether the installation is
new construction, an upgrade or retrofit,
DMP wireless communication gets the
job done faster with less eort.
TWO-WAY COMMUNICATION
Superior to traditional wireless devices
that just broadcast until the zone is
restored, DMP 1100 Series require an
acknowledgement from the receiver,
indicating successful communication.
This smart technology ensures that each
and every communication is received
and eciently processed at the panel.
900 MHZ SPREAD-SPECTRUM TECHNOLOGY
DMP wireless communication employs
900 MHz frequency-hopping spreadspectrum to ensure clear and accurate
signal transmissions without interference
in practically any environment.
INCREASED SECURITY
Other wireless devices can take up
to four hours before the system
recognizes a missing device! With
two-way communication, if the receiver
misses an expected supervision
message, the system immediately
reports the zone or output as missing,
so your system’s integrity and reliability
are never compromised.
128-BIT ENCRYPTION
The 1100 Series’ E models deliver
industry-standard 128-bit AES
encryption over the air and frequencyhopping spread-spectrum. For added
security, DMP 1100 Series encrypted
devices allow you to enter your own
passphrase for unique key generation,
providing full encryption end to end.
Encryption is compatible with XR and XT
Series panels with version 183 or higher.
The E model wireless devices and
receivers are oered separately from
existing 1100 Series devices. For
the highest level of encryption, it is
recommended that all devices on the
system be E models, although each of
the new products are fully backward
compatible with systems that do not
support encryption, so they can be
added to existing systems or operate as
a stand-alone system.
MODEL FEATURES
Model Description Compatibility Encryption High Power UL 864
1100D Wireless Receiver XT Series
1100DH Wireless High Power Receiver XT Series •
1100DI Wireless In-line Receiver XT Series
1100DE Encrypted Wireless Receiver XT Series •
1100DHE Encrypted Wireless High Power Receiver XT Series • •
1100X Wireless Receiver XR Series •
1100XH Wireless High Power Receiver XR Series • •
1100XE Encrypted Wireless Receiver XR Series • •
1100XHE Encrypted Wireless High Power Receiver XR Series • • •
1100R Wireless Repeater XT, XTL & XR Series •
1100RE Encrypted Wireless Repeater XT, XTL & XR Series • •
1100T Wireless Translator XT, XTL & XR Series •
1100TF
Wireless Translator with 24-hour standby
battery backup
XT, XTL & XR Series •
Page 3
1100D AND 1100X RECEIVERS
Competitively priced for residential
or commercial applications, the 1100D
and 1100X Receivers allow you to add
wireless transmitters to DMP panels as
easily as adding a keypad. Supporting
up to 32 wireless transmitters using the
1100D or up to 500 transmitters using
the 1100X, DMP receivers satisfy all
wireless applications.
1100DH AND 1100XH RECEIVERS
The more powerful 1100DH and 1100XH
oer the same Two-Way Wireless
capabilities as the basic 1100D and
1100X models, but with the added
power needed for harsh radio frequency
environments. The 1100DH installs on the
keypad bus of the XT Series panels. The
1100XH installs on the wireless bus of the
XR Series panels.
1100DI RECEIVER
This economical receiver provides
the same basic features as the 1100D
model but in a more compact unit.
The 1100DI connects anywhere on the
keypad bus of XT Series panels and is
suitable for either residential or small
commercial applications.
1100 SERIES WIRELESS
1100R REPEATER
Extend the communication range of
DMP wireless devices with the 1100R
Wireless Repeater. Use up to eight
1100R repeaters with any DMP 1100
Series receiver system. The plug-in DC
power supply is backed up by a 24-hour
battery. Onboard LEDs provide builtin survey capability to enable singleperson installation and eliminate the
requirement for an external survey kit.
An internal case tamper switch provides
device security.
1100T AND 1100TF TRANSLATORS
The 1100TF Wireless Translator includes
a 24-hour standby battery backup
for residential and commercial fire
applications. Both the 1100T and 1100TF
allow upgrades of non-DMP systems
with one-way, low-frequency, wireless
transmitters. It is compatible with
transmitters that operate at various
MHz such as Interlogix, Honeywell
5800, 2GIG and DSC. With this one
device, you can easily take over any
of these systems and upgrade them
to DMP panels, receivers and software
management tools. With 24-hour
standby operation, the new 1100TF is
ideal for commercial fire installations
and is in accordance with NFPA 70 and
NFPA 72.
The 1100T communicates to a DMP panel
via DMP’s 1100 Series receivers’ wireless
connection that eliminates wiring. To
accommodate the panel’s maximum
number of supported sensors, one 1100T
can learn in:
▸ 32-48 zones with XT panels
▸ 99 zones with XTL panels
▸ 100 zones with XR150 panels
▸ 128 zones with XR550 panels
With this one device, you can continue
to use the working transmitters and
sensors to send events, supervision
and low battery messages to the panel.
Keeping existing transmitters and
sensors in place allows you to save your
customers money and reduce their level
of interruptions with quicker installations.
The 1100T gives your customers DMP
quality with online and app convenience
and functionality without increasing
installation costs. The 1100T is also
compatible with life safety devices and is
certified for commercial and residential
smoke detection.
Page 4
COMPATIBILITY REFERENCE SHEET
Frequency Range 905-924 MHz
Flame-retardant ABS constructed housings
1100D/1100X/1100DE/1100XE Receiver
Operating Voltage 8.0 to 14 VDC
Current Draw 35 mA
Dimensions 5.5" W × 3.75" H × 1" D
1100DH/1100XH/1100DHE/1100XHE Receiver
Operating Voltage 8.0 to 14 VDC
Current Draw 100 mA
Dimensions 5.5" W × 3.75" H × 1" D
1100DI Receiver
Operating Voltage 8.0 to 14 VDC
Current Draw 45 mA
Housing Dimensions 3.3" L × 1.6" W × 1.2" H
1100R/1100RE Repeater
Operating Voltage 8.0 to 14 VDC
Dimensions 5.5" W × 3.75" H × 1" D
1100T Translator
Operating Voltage 12 VDC, 23 mA
Standby Battery
Voltage 3.7 VDC
Capacity 800 mAh
Type Lithium Polymer, rechargeable
Standby 4 hours
Dimensions 5.50" W × 3.75" H × 1.00" D
1100TF Translator
Operating Voltage 12 VDC, 31 mA
Standby Battery
Voltage 3.7 VDC
Capacity 2400 mAh
Type Lithium Polymer, rechargeable
Standby 24 hours
Dimensions 5.50” W × 3.75” H × 1.00” D
1100 SERIES WIRELESS
Compatibility
XTL, XT and XR Series Panels
Accessories
376L DC Plug-in Power Supply (1100R only)
1100RBAT800/8 Rechargeable Battery (1100R only)
ES532 Outdoor Enclosure (1100D/DH, 1100X/XH)
ES531 Outdoor Enclosure (1100DI only)
Patents
U.S. Patent No. 7,239,236
Certifications
California State Fire Marshal (CSFM)
FCC Part 15 Registration ID
CCK1100 1100D, 1100X
CCKPC0110 1100R
CCKPC0111 1100DI
CCKPC0114 1100DH, 1100XH
CCKPC0114R6 1100D, 1100DH
Industry Canada ID
5251A-PC0082 1100D, 1100X
5251A-PC0110 1100R
5251A-PC0111 1100DI
5251A-PC0114 1100DH, 1100XH
5251A-PC0114R6 1100D, 1100DH
Underwriters Laboratories (UL) Listed
Listings for 1100 Series Receivers and Repeaters
ANSI/UL 365
ANSI/UL 609
ANSI/UL 634
ANSI/UL 639
ANSI/UL 1023 (Also 1100T and 1100TF)
ANSI/UL 1076
ANSI/UL 1610
ANSI/UL 985 (Also 1100T and 1100TF)
Additional listings for 1100D and 1100X
ANSI/UL 636
Additional listings for 1100X, 1100XH, 1100R, 1100T and 1100TF
ANSI/UL 864
Additional listings for 1100R
ANSI/UL 268
Additional listings for 1100T and 1100TF
ANSI/UL 2610
For additional information, visit DMP.com/Compliance.
800-641-4282 | DMP.com
2500 N. Partnership Blvd, Springfield, MO 65803
Designed, engineered & manufactured in Springfield, MO
using U.S. & global components
LIMITED WARRANTY: DMP warrants that the products
manufactured by DMP and described herein shall be free
from defects of manufacture, labeling, and packaging
for a period of three (3) years from the invoice date
to the original Buyer, provided that representative
samples of the defective products are returned to DMP for
inspection…To read the full DMP Limited Warranty, go to
DMP.com/Warranty or check the DMP Price List or Catalog.
© 2021 Digital Monitoring Products, Inc. | LT-0691 | 21153
Loading...