D Link SL2640T Users Manual

This product can be se up using any current we

rowser, e.g., Interne

Explorer 6 or Netscape

avigator 6.2.3.

Before You Begin

Make sure you have all the necessary information and equipment on hand before beginning the installation.

Check Your Package Contents

DSL-2640T Wireless ADSL Router

CD-ROM (containing Manual)

Ethernet (CAT5 UTP) Cable

Telephone Cable

Power Adapter

Using a power supply

with a different voltage rating will damage and void the warranty for this product.

If any of the items above are missing, please contact your reseller.

Connecting the Router to Your Computer

A. First, connect the power adapter to the receptor at the back panel of the

DSL-2640T and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn on to indicate proper operation.

B. Insert one end of the cable into the Ethernet port on the back panel of the

DSL-2640T and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.

ADSL Port

Connect to

ADSL line

Ethernet Ports

Connect to Ethernet cable

Power Input

Connect to

power adapter

Configuring the Router

To use your Web browser to access the web pages used to set up the Router, your computer must be configured to “Obtain an IP address automatically,” that is, you must change the IP network settings of your computer so that it is a DHCP Client. If you are using Windows XP and do not know how to change your network settings, skip ahead to Appendix A and read the instructions provided. You may also read the User Manual for instructions on changing IP settings for computers running Windows operating systems.

Open your Web browser and type

“http://192.168.1.1” into the URL address

box. Then press the Enter or Return key. The login dialog appears.

The logon pop-up screen will appear.

Type “admin” for the User Name and

“admin” in the

Password field.

Click OK.

Configuring the Router (continued)

Once you have logged in, the Home directory tab featuring the Setup Wizard window opens. Most users will be able to use the Setup Wizard to establish the ADSL connection to your ISP. To begin using the Setup Wizard, click on the Run Wizard button in the middle of the web page. The first pop-up Setup Wizard window opens.

Click on the Run Wizard button.

Configuring the Router (continued)

The Setup Wizard procedure consists of these general steps:

1. Set the time zone

2. Set the Internet connection

3. Set the Wireless configuration

4. Restart the Router When you setup the Internet connection, you will need to enter information provided by your ISP. If you have not been given information about the connection type, the VPI and VCI numbers, as well as other information related to the connection type, you will not be able to complete the setup.

The first Setup Wizard window lists a summary of the steps required to complete the setup. Click the Next button to begin setup.

Click the Next button.

Configuring the Router (continued)

The initial step is to configure the Time Zone used for the Router’s system clock. Select the appropriate time zone for your location. Click the Next button when you have made your choice.

Select the Time Zone.

Click the Next button.

Configuring the Router (continued)

Next you will Select the Internet Connection Type for the WAN interface. Your ISP has given this information to you. If you do not know what type of connection to use, exit the Setup Wizard and contact your ISP for the information. The Setup Wizard window that appears when you click the Next button depends on what connection type you select. The connection types available in the Setup Wizard window are PPPoE/PPPoA , Dynamic IP Address, Static IP Address, and Bridge Mode. Follow the instructions below for the type of connection you are using.

Select the Connection Type

used for your ADSL service.

Click the Next button.

Configuring the Router (continued)

PPPoE/PPPoA Connections

If you selected the PPPoE/PPPoA connection type in the previous window, you will see the Setup Wizard window pictured here. Type in the Username and Password used to identify and verify your account to the ISP. If you have been instructed to change the VPI number and VCI number, type in the new values. Select the Connection Type used for encapsulation specific to your service. Click Next when you are ready to continue to the Setup Completed window.

Type the User Name and

Password for your ISP account.

Change the VPI and VCI numbers as

instructed by your ISP. Type the new

values in the spaces provided here.

Select the Connection Type

as instructed by your ISP.

Click the Next button. Skip ahead to the Setup Completed window below.

Configuring the Router (continued)

Dynamic IP Address Connections

If you selected the Dynamic IP Address connection type, select the Connection Type used for encapsulation. If you have been instructed to change the VPI number and VCI number, type in the new values. Click Next when you are ready to continue the Setup Completed window.

Change the VPI and VCI numbers as

instructed by your ISP. Type the new

values in the spaces provided here.

Select the Connection Type as instructed by your ISP.

Click the Next button. Skip ahead to the Setup Completed window below.

An option for Dynamic IP Address connections is to use the MAC address from your computer in place of the Router’s actual MAC address for the purpose of Address Resolution by the ISP’s DHCP server. To implement this feature click on the Clone MAC Address button before

Note

continuing to the next window.

Configuring the Router (continued)

Static IP Address Connections If you selected the Static IP Address connection type, change the WAN IP Address, Subnet Mask, ISP Gateway Address, Primary DNS (Server IP) Address and (if available) Secondary DNS (Server IP) Address as instructed by your ISP. Select the Connection Type used for

encapsulation. If you have been instructed to change the VPI number and VCI number, type in the new values. Click Next when you are ready to continue to the Setup Completed window.

Change the VPI and VCI numbers as

instructed by your ISP. Type the new

values in the spaces provided here.

Type the IP addresses for the

WAN IP Address, WAN Subnet

Mask, ISP Gateway Address,

Primary DNS Address and

Secondary DNS Address.

Select the Connection Type as instructed by your ISP.

Click the Next button. Skip ahead to the Setup Completed window below.

+ 21 hidden pages