D-link N300 DAP-1365 User Manual
Version 1.01 | 2016/3/21
User Manual
N300 Wi-Fi Range Extender with Power Passthrough
DAP-1365
Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes.
Manual Revisions
Revision Date Description
1.01 March 21, 2016 • Initial release
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store
SM
is a service mark of Apple Inc.
Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.
Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2016 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed
written permission from D-Link Corporation.
Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network
Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save
energy.
Network Standby: 1.4 watts
iD-Link DAP-1365 User Manual
Table of Contents
Table of Contents
Preface ................................................................................. i
Product Overview ..............................................................1
Package Contents .........................................................................1
System Requirements ................................................................. 2
Introduction ................................................................................... 3
Features .................................................................................... 3
What is a Wireless Extender? ............................................4
Hardware Overview .....................................................................5
Front .......................................................................................... 5
Side ............................................................................................ 6
Wireless Signal Strength Indicator LED......................... 8
Back............................................................................................9
Installation ....................................................................... 10
Wireless Installation Considerations ....................................10
Power Installation Considerations ........................................11
Important Safety Instructions ................................................12
Hardware Setup ..........................................................................13
Extend an Existing Network ............................................25
Add Wireless to Your Wired Network ........................... 28
Congure Administrator Password ..............................30
Save Your Conguration ...................................................31
Conguration ................................................................... 32
Home ..............................................................................................32
Uplink Router .......................................................................33
DAP-1365 ...............................................................................34
Connected Clients ..............................................................35
Settings ..........................................................................................36
Extender Settings ...............................................................36
Network Settings ................................................................37
Autoconguration (SLAAC/DHCPv6) ...................... 38
Static IPv6 .........................................................................39
Link-local Only ................................................................40
Management ................................................................................41
Admin .....................................................................................41
System ....................................................................................42
Getting Started ................................................................ 14
WPS-PBC Conguration ...........................................................15
QRS Mobile App Setup .............................................................16
Web-based Setup .......................................................................21
Setup Wizard ................................................................................22
Connecting Your Device via WPS ..................................23
WPS Successful ...............................................................24
WPS Unsuccessful ..........................................................24
Upgrade .................................................................................43
Statistics .................................................................................44
Connecting Wireless Clients to the Extended Network 45
WPS Button ...................................................................................45
Windows® 10 ................................................................................46
Windows® 8 ...................................................................................48
Windows® 7 ...................................................................................50
iiD-Link DAP-1365 User Manual
Table of Contents
Windows Vista® ............................................................................53
Troubleshooting .............................................................. 56
Wireless Basics .................................................................58
Tips ...................................................................................................59
Technical Specications ..................................................60
GPL Code Statement........................................................61
Regulatory Statements ...................................................76
iiiD-Link DAP-1365 User Manual
Section 1 - Product Overview
DAP-1365 N300 Wi-Fi Range Extender with Power Passthrough
Wi-Fi Conguration Note
Wi-Fi Conguration Card
Package Contents
Quick Installation Guide
If any of the above items are missing, please contact your reseller.
1D-Link DAP-1365 User Manual
Section 1 - Product Overview
System Requirements
Network Requirements
Web-based Conguration
Utility Requirements
• A wireless router with an active Internet connection.
• 802.11n, 802.11g, or 802.11b wireless clients/devices
A Computer or Mobile Device with the following:
• Windows®, Apple® Mac OS®, or Linux-based operating system
• Wireless adapter or Wi-Fi functionality
• An Apple® iPhone®, iPod touch®, iPad®, or Android™ mobile
device
Browser Requirements:
• Internet Explorer® 10 or later
• Firefox® 28 or later
• Safari® 6 or later
• Google Chrome™ 28.0 or later
2D-Link DAP-1365 User Manual
Section 1 - Product Overview
Introduction
Features
Easily Extend Your Existing Network
The DAP-1365 N300 Wi-Fi Range Extender with Power Passthrough lets you easily extend a secure wireless network with a press
of a button. Connect the DAP-1365 to a router via Wi-Fi or Ethernet and share your high-speed Internet access in more places
throughout your home or small oce. Additionally, the DAP-1365 provides a passthrough power socket to ensure that your
electrical outlet remains available.
High-speed Wireless Performance With Wireless 802.11n Technology
Thanks to the latest Wireless N technology, the DAP-1365 provides a wireless connection at up to 300 Mbps* with other 802.11n
wireless devices. This feature lets you participate in real-time activities online, such as video streaming, online gaming, and real-time
audio with smooth performance.
Simple Setup
All it takes is a press of a button to connect compatible WPS devices to the DAP-1365. Its easy-to-use web interface lets you quickly
and easily connect the DAP-1365 to an uplink router, congure the extended wireless network, and manage the administrative
settings. The setup wizard will even guide you through the setup process, getting your extended wireless network up and running
in no time. Alternatively, connect an Ethernet cable to your existing network infrastructure to quickly and easily create a wireless
network.
Compatibility
The DAP-1365 is fully compatible with 802.11n, and it is also backwards compatible with IEEE 802.11g/b wireless devices, so you can
use your existing devices without sacricing performance.
Latest Wireless Network Security and Encryption
The DAP-1365 supports wireless security features to prevent unauthorized access from the wireless network. Support for WPA/
WPA2 standards ensure that you’ll be able to use the best possible encryption methods with your compatible wireless devices.
* Maximum wireless signal rate derived from standard IEEE specications. Actual data throughput will vary. Network conditions and environmental factors, including volume
of network trac, building materials and construction, and network overhead may lower actual data throughput rate. Environmental conditions will adversely aect wireless
signal range.
3D-Link DAP-1365 User Manual
Section 1 - Product Overview
What is a Wireless Extender?
The DAP-1365 acts as a repeater to extend the range of an existing wireless network to provide a better signal for parts of your
home or oce that may have poor or no reception. Your existing wireless signal will be re-broadcast by the DAP-1365, allowing
you to reach the farthest corners of your home or oce. The extended network can simply use the same network credentials as the
existing network, or you can specify a dierent network name and password, giving you the exibility to control network access.
You may also use the DAP-1365 as a wireless access point by connecting an Ethernet cable.
Extend Your Wireless Network using Wi-Fi
Computer
Internet
Router
DAP-1365
Extender
Create a Wireless Network using Ethernet
Internet DAP-1365
Router
Access Point
Wireless Devices
Computer
Wireless Devices
4D-Link DAP-1365 User Manual
Section 1 - Product Overview
Hardware Overview
Front
1
2
43
1 External Antennas Extend the antennas for optimal wireless coverage.
2 Power Outlet Plug-in electrical devices using this power passthrough outlet.
3 Status/WPS LED This LED indicates the current status of the DAP-1365, as detailed on the next page.
4 Signal Indicator LED
The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network. A single
solid amber LED indicates a weak Wi-Fi signal. Refer to “Wireless Signal Strength Indicator LED” on page 8.
5D-Link DAP-1365 User Manual
Section 1 - Product Overview
Hardware Overview
Side
Press to establish a connection with another WPS compatible device. Pressing the WPS button for 1 second allows
1 WPS Button
2
3
* Your plug type may dier from the image.
LAN Connect an Ethernet cable if you are adding wireless to an existing wired network.
Reset Button Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1365 for 10 seconds.
you to connect with Wi-Fi clients using Wi-Fi Protected Setup. Refer to “WPS-PBC Conguration” on page 15 for
more information.
1
2
3
6D-Link DAP-1365 User Manual
Section 1 - Product Overview
Status/WPS LED Indicator
Status/WPS LED Indicator
LED Indicator Color Status Description
Solid The DAP-1365 is receiving power and connected to a host network.
Blinking WPS mode is active.
Power/Status
Green
Red Solid The DAP-1365 is booting or an error has occurred.
Amber Blinking The DAP-1365 is not connected to a host network.
None O Device is not receiving power. Check the power outlet.
7D-Link DAP-1365 User Manual
Section 1 - Product Overview
Wireless Signal Strength Indicator LED
The Status/WPS LED will turn solid green when the DAP-1365 has connected successfully to an uplink wireless network and is
extending that network. If the Signal Indicator LED has a single amber bar after the connection process has nished, the DAP-1365
has established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To improve
the connection quality, the DAP-1365 should be relocated closer to the source wireless router.
Poor
Ok
Good
Best
8D-Link DAP-1365 User Manual
Section 2 - Installation
Hardware Overview
Back
You may locate the Wi-Fi name (SSID) and password for your DAP-1365. This information is printed on the specication sticker on
the back of the device. You will need this information to connect your computer or mobile device to the default network (SSID) of
your DAP-1365. This information is also provided on the Wi-Fi conguration card.
* Your plug type may dier from the image.
9D-Link DAP-1365 User Manual
Section 2 - Installation
Installation
Wireless Installation Considerations
The DAP-1365 lets you extend your existing wireless network’s coverage as long as it is within range of the uplink network. Keep in
mind that the DAP-1365’s extension network’s range may be limited by the number, thickness and location of walls, ceilings, or other
objects that the wireless signals must pass through. Typical ranges vary depending on the types of materials and background RF (radio
frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link extender and other network devices to a
minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your
devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree
angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for
better reception.
3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on
range. Try to position extenders, access points, wireless routers, and computers so that the signal passes
through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation,
water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF
noise.
5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home
security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4
GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the
phone is not in use.
10D-Link DAP-1365 User Manual
Section 2 - Installation
Power Installation Considerations
Plan the location of your Extender and devices plugged into the passthrough outlet:
1. Connect range extenders with power passthrough to electrical outlets that are not controlled by a wall switch to avoid
accidentally turning o power to the device.
2. To help prevent electrical shock, be sure to plug the power cables into properly grounded electrical outlets.
3. The Extender is designed to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from the
cable.
4. Do not exceed the circuit load rating listed on the front of the device.
11D-Link DAP-1365 User Manual
Section 2 - Installation
Important Safety Instructions
Please read all of the safety and operating instructions before using your device:
1. Do not open the device or attempt to repair or service the device.
2. Use the device in a dry location, and avoid placing it in humid environments.
3. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect it
from the power outlet and use a damp towel.
4. Keep the device out of direct sunlight.
5. Do not cover or block the vents on the device.
6. Make sure that the device has adequate room for ventilation.
8. Avoid placing the device near a heater or radiator.
9. The device should be located only where sucient ventilation can be ensured.
10. The purpose of this product is to create a constant network connection for your devices. If you wish to power down
this product, please simply unplug it from the power outlet.
12D-Link DAP-1365 User Manual
Section 2 - Installation
Hardware Setup
Find a location
Position Antennas
Plug-in Extender
Outlet
Locate your DAP-1365 to an area which
you wish to extend Wi-Fi to.
Move the antennas to their upward
position before plugging in the
extender.
Plug in the DAP-1365 to an outlet or
power strip. The WPS/Status LED will
immediately activate to indicate the
device is booting up.
13D-Link DAP-1365 User Manual
Section 3 - Conguration
Getting Started
There are several conguration tools you can use to set up your DAP-1365.
• WPS PBC - To easily extend an existing wireless network refer to “WPS-PBC Conguration” on page 15 for setup
instructions.
• QRS Mobile App - Use your Android device or iPhone, iPad, or iPod touch to congure your extender. Refer to “QRS
Mobile App Setup” on page 16 for setup instructions.
• D-Link Setup Wizard - This wizard will launch when you log into the Extender’s web conguration utility for the rst
time. Refer to ”Setup Wizard” on page 22 for setup instructions.
• Manual Conguration - Advanced users who wish to manually setup extender or adjust its settings may refer to
“Conguration” on page 32 for more information.
14D-Link DAP-1365 User Manual
Section 3 - Conguration
Blinking
WPS-PBC Conguration
WPS Button
WPS Button
The device is ready to connect to an
uplink network once the WPS/Status
LED is blinking amber.
Blinking
Push the WPS buttons on both the
source wireless router or access point.
The Status/WPS LED on the DAP-1365
will start to blink green. Please allow up
to two minutes for the process to nish
The Status/WPS LED will turn solid
green once the DAP-1365 has
connected successfully to the uplink
wireless network. The new extension
network will be named:
(Source SSID)-EXT
The password be the same as the
source network’s.
15D-Link DAP-1365 User Manual
Section 3 - Conguration
QRS Mobile App Setup
The DAP-1365 can be set up from your iPhone, iPod touch, iPad, or Android smartphone or tablet device using the QRS Mobile app.
Note: The screenshots may be dierent depending on your mobile device’s OS version.
Step 1
Search for the free QRS Mobile App on the Apple App Store or Google Play.
Step 2
Once your app is installed, you may now congure your extender. Connect to the
router wirelessly by going to your wireless utility on your device. Scan for the WiFi name (SSID) as listed on the supplied conguration card. Select and then enter
your Wi-Fi password.
Step 3
Once wirelessly connected to the extender, launch the QRS Mobile app from the
Home screen of your device.
Note: The following steps show the iOS interface of the QRS Mobile app. If you are
using an Android device, the appearance may be dierent to that of the screenshots,
but the process is the same.
16D-Link DAP-1365 User Manual
Section 3 - Conguration
Click Start to continue.
Click Next to continue.
17D-Link DAP-1365 User Manual
Section 3 - Conguration
QRS Mobile will rst detect your DAP-1365, then scan for available
Wi-Fi networks. Select the network you wish to extend. Tap Rescan
if your network doesn’t show up the rst time.
Enter a password for the existing Wi-Fi network. Click Next to
continue.
18D-Link DAP-1365 User Manual
Section 3 - Conguration
Enter a network name (SSID) and password for the extended
Wi-Fi network. Click Next to continue.
Create an admin password for the DAP-1365’s web-based
conguration utility. Click Next to continue.
19D-Link DAP-1365 User Manual
Section 3 - Conguration
A summary of your settings will be displayed. Click Save to reboot
the device and to complete the setup.
After the setup wizard is complete, the following screen will appear.
To connect to the extended network, you can now change your
mobile device and laptop Wi-Fi settings to the wireless network
name and password you just created. You can also share your Wi-Fi
information by clicking Share by E-mail.
20D-Link DAP-1365 User Manual
Section 3 - Conguration
Web-based Setup
To access the setup utility for the DAP-1365 N300 Wi-Fi Range Extender with
Power Passthrough on your PC, rst connect to the DAP-1365 wirelessly using the
Wi-Fi name (SSID) and password located on your Wi-Fi Conguration Card. Then
open a web browser and enter http://dlinkap.local./ in your browser’s URL eld.
You may also enter the IP address* of the DAP-1365.
Note: Web browser conguration is not supported for Android Devices. Please
use the QRS Mobile Application to congure your device.
* The default IP address is 192.168.0.50. Once your DAP-1365 connects to the host network,
it will be assigned a new IP address based on your network’s DHCP settings. You will need
to log in to your router to see what IP address is assigned to your DAP-1365.
For multiple DAP-1365s, go to http://dlinkapxxxx.local./ as shown on the included Wi-Fi
Conguration Card, with “xxxx” being the last four digits of the DAP-1365’s MAC address.
Enter your password. By default, Admin is the username and cannot be changed,
and by default, the password is blank.
The conguration interface will open, and you can congure the various settings
for the DAP-1365. If you have not yet congured an uplink network, the home
screen will show that there is no connection between the DAP-1365 and the
uplink router.
21D-Link DAP-1365 User Manual
Section 3 - Conguration
Setup Wizard
If this is your rst time logging in to the extender and no connection has been
established, the setup wizard will automatically appear.
In the future, if you wish to set up your extender using the setup wizard, click the
Uplink Router icon.
The setup wizard is designed to guide you through a
step-by-step process to congure your new DAP-1365
N300 Wi-Fi Range Extender with Power Passthrough to extend your wireless
network and connect to the Internet.
The steps are:
Step 1: Connecting Your Device
Step 2: Conguring Your Settings
Step 3: Setting a Password for Your Device
Click Next to begin.
22D-Link DAP-1365 User Manual
Section 3 - Conguration
Connecting Your Device via WPS
After clicking the Next button from the previous step, the DAP-1365 will
automatically initiate a WPS-PBC (Wireless Protected Setup - Push Button Control)
search to nd an uplink network to extend. If your existing wireless networking
device has a physical or virtual WPS button, press or enable it within the 120
seconds allotted by the countdown timer.
If you do not wish to use WPS or your existing networking device does not have a
WPS feature, select one of the alternative conguration options:
Extend an existing network, see page 25 for more information or
Add wireless to your wired network, see page 28 for further setup
information.
Once the 120 second timer has elapsed, proceed to the next page.
23D-Link DAP-1365 User Manual
Section 3 - Conguration
WPS Successful
If a WPS connection is successfully established you will be prompted to congure
your extension network settings. The current network name and password will be
displayed.
You may now rename the 2.4 GHz network extension network and create a new
password if you wish.
Please be sure to note any changes you make as these credentials will be required
for wireless clients wishing to join your network.
Click Next to proceed to Congure Administrator Password, refer to page 30
for more information, or click Back to return to the previous step.
*Wireless network names and passwords are shown for example only.
WPS Unsuccessful
If the WPS countdown timer expires, and no connection to an uplink wireless
network could be established, you may press the retry button to attempt the
process again or if you do not wish to use WPS, or are having diculty using the
WPS feature, you can try using one of the alternative conguration options:
Extend an existing network, see page 25 for more information or
Add wireless to your wired network, see page 28 for further setup
information.
24D-Link DAP-1365 User Manual
Section 3 - Conguration
Extend an Existing Network
To set up your network manually, select Extend an Existing Network from the
setup wizard menu. Click Next to continue.
The DAP-1365 will scan for available wireless networks and display a list of results.
You may choose one of the following options to proceed:
• If the wireless network you wish to extend was detected by the scan, click on
the network to select it. The extender will automatically forward you to the
next step.
• If the network you would like to extend was not detected by the scan, click the
Manual button.
Note: If the wireless network you would like to extend to was not detected by the
scan, your DAP-1365 might be out of range and you may need to reposition the
extender closer to the host network device.
D-Link Home Router
D-Link 2nd Floor
D-Link Basement
D-Link Garage
D-Link Guest House
25D-Link DAP-1365 User Manual
Section 3 - Conguration
dlinkrouter
If the wireless network you wish to extend was detected by the scan, enter the
password now.
Click Next to continue on to congure your extension network settings, or click
Back to return to the previous step.
If you chose Manual , enter the Wireless Network Name, type of Security, and
Password of the existing Wi-Fi network you wish to connect to.
Click Next to continue on to congure your extension network settings, or click
Back to return to the previous step.
26D-Link DAP-1365 User Manual
Loading...