D Link IR615I1 User Manual

Preface

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.

Manual Revisions

Revision Date Description
5.2 December 22, 2009 • Updated for revision E1
5.3 March 10, 2010
5.4 November 15, 2010 • Added Windows® 7 support
8.0 August 22, 2011 New Hardware revision I1
• Updated for revision E3
• Added Language Pack

Trademarks

D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, and Microsoft Windows 7 are registered trademarks of the Microsoft Corporation. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2011 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.
iD-Link DIR-615 User Manual
Table of Contents
Table of Contents
Preface ................................................................................. i
Manual Revisions Trademarks
Product Overview .............................................................. 1
Package Contents System Requirements Features Hardware Overview
Connections LEDs
Installation .........................................................................6
Before you Begin Wireless Installation Considerations Network Diagram Connect to Cable/DSL/Satellite Modem Connect to Another Router Getting Started
...................................................................................... i
............................................................................................3
...........................................................................................5
........................................................................... i
.........................................................................1
................................................................. 2
..................................................................... 4
...........................................................................4
........................................................................... 6
...................................... 7
.........................................................................8
.............................. 9
....................................................10
............................................................................11
....................................................................................28
L2TP Static IP Address
Wireless Settings
Manual Wireless Network Setup
Network Settings
DHCP Server Settings
DHCP Reservation Virtual Server Port Forwarding Application Rules
QoS Engine............................................................................40
Network Filters Access Control
Access Control Wizard Website Filters
Inbound Filters.....................................................................46
Firewall Settings Routing
........................................................................36
..................................................................................48
.............................................................30
.................................................................31
..............................32
................................................................33
...................................................34
.........................................................35
..................................................................38
................................................................39
.....................................................................41
.....................................................................42
..................................................42
......................................................................45
..................................................................47
Conguration ...................................................................12
Quick Setup Wizard Web-based Conguration Utility
Internet Connection Setup Wizard Manual Conguration
Dynamic (Cable) PPPoE (DSL)
....................................................................................27
PPTP
....................................................................12
..........................................18
...............................19
.......................................................24
.............................................................24
......................................................................26
Advanced Wireless Settings Advanced Network Settings
UPnP
Internet Ping Block
Internet Port Speed
Multicast Streams Time Settings SysLog E-mail Settings
...................................................................................50
........................................................50
.......................................................50
..........................................................50
.......................................................................51
.....................................................................................52
.....................................................................53
............................................49
...........................................50
iiD-Link DIR-615 User Manual
Table of Contents
System Settings ...................................................................54
Firmware DDNS System Check Schedules Device Information
...........................................................................................61
Log Statistics Internet Sessions Routing Table Wireless Support
................................................................................55
.......................................................................................56
.......................................................................57
..............................................................................58
............................................................59
.................................................................................62
.................................................................63
.......................................................................65
..................................................................................66
..................................................................................67
Wireless Security .............................................................68
What is WPA? Wireless Network Setup Wizard Add Wireless Device with WPS Wizard
................................................................................68
............................................69
................................72
What is Wireless?
...................................................................................................97
Tips Wireless Modes
.........................................................................95
............................................................................98
Networking Basics ...........................................................99
Check your IP address Statically Assign an IP address
...............................................................99
............................................ 100
Technical Specications ................................................101
Contacting Technical Support ......................................102
GPL Code Statement......................................................103
Warranty .........................................................................105
Registration ...................................................................111
Congure WPA-Personal (PSK) Congure WPA-Enterprise (RADIUS) Connect to a Wireless Network
®
Using Windows
Congure WPS
Using Windows Vista
7 ...............................................................76
................................................................79
® .....................................................................................................83
...............................................73
....................................74
.............................................76
Congure WPA/WPA2 ...................................................84
Connect Using WCN 2.0
®
Using Windows
XP ............................................................87
Congure WPA-PSK
...................................................86
.......................................................88
Troubleshooting ..............................................................90
Wireless Basics ................................................................. 94
iiiD-Link DIR-615 User Manual
Section 1 - Product Overview
D-Link DIR-615 Wireless N Router
Power Adapter
Ethernet Cable
CD-ROM

Product Overview

Package Contents

Note: Using a power supply with a dierent voltage rating than the one included with the DIR-615 will cause damage and void the warranty for this product.
1D-Link DIR-615 User Manual
Section 1 - Product Overview
Network Requirements
Web-based Conguration
Utility Requirements

System Requirements

• An Ethernet-based Cable or DSL modem
• IEEE 802.11n/g wireless clients
• 10/100 Ethernet
Computer with the following:
• Windows®, Macintosh, or Linux-based operating system
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer 6 or higher
• Chrome 2.0 or higher
• Firefox 3.0 or higher
• Safari 3.0 or higher
CD Installation Wizard
Requirements
Windows® Users: Make sure you have the latest version of Java
installed. Visit www.java.com to download the latest version.
Computer with the following:
• Windows® XP (Service Pack 3), Vista® or Windows® 7
• An installed Ethernet adapter
• CD-ROM drive
2D-Link DIR-615 User Manual
Section 1 - Product Overview
Faster Wireless Networking - The DIR-615 provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.
• Compatible with 802.11g Devices - The DIR-615 is still fully compatible with the IEEE 802.11g standard, so it can connect with existing 802.11g PCI, USB and Cardbus adapters.
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network management features including:
• Content Filtering - Easily applied content ltering based on MAC Address, URL, and/or Domain Name.
• Filter Scheduling - These lters can be scheduled to be active on certain days or for a duration of hours or minutes.
• Secure Multiple/Concurrent Sessions - The DIR-615 can pass through VPN sessions. It supports multiple and
concurrent IPSec and PPTP sessions, so users behind the DIR-615 can securely access corporate networks.

Features

• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-615 lets you control what information is
accessible to those on the wireless network, whether from the Internet or from your company’s server. Congure your router to your specic settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.
3D-Link DIR-615 User Manual
Section 1 - Product Overview

Hardware Overview

Connections

1
1 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and hubs.
2 Internet Port
3 Reset Button
4 Power Receptor Receptor for the supplied power adapter.
The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem.
Pressing the Reset button restores the router to its original factory default settings.
2 3 4
4D-Link DIR-615 User Manual
Section 1 - Product Overview
Hardware Overview

LEDs

1 2 3 4
1 Power LED A solid light indicates a proper connection to the power supply.
2 Internet LED A solid light indicates connection on the Internet port. This LED blinks during data transmission.
3 WAN LED
4 LAN LEDs (1-4)
A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission.
A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission.
5D-Link DIR-615 User Manual
Section 2 - Installation

Installation

This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage.

Before you Begin

• Please congure the router with the computer that was last connected directly to your modem.
• You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.
• When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online.
6D-Link DIR-615 User Manual
Section 2 - Installation

Wireless Installation Considerations

The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
7D-Link DIR-615 User Manual
Section 2 - Installation

Network Diagram

Desktop
Laptop
DIR-615 Modem
1 2 LAN 3 4 INTERNET
RESET
5V
3A
---
INTERNET
8D-Link DIR-615 User Manual
Section 2 - Installation

Connect to Cable/DSL/Satellite Modem

If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power o on your modem. If there is no on/o switch, then unplug the modem’s power adapter. Shut down your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the Internet port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot.
7. Turn on your computer.
8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct.
9. Skip to page 12 to congure your router.
9D-Link DIR-615 User Manual
Section 2 - Installation

Connect to Another Router

If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network:
• Disable UPnP
• Disable DHCP
• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking Basics section for more information. If you need to change the settings, write down your existing settings before making any changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have to do anything to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to Admin and leave the password box empty. Click
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server server checkbox. Click Save Settings to continue.
5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to access the conguration utility of the router in the future. Close the browser and change your computer’s IP settings back to
the original values as in Step 1.
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
Log In to continue.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To congure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Conguration and Wireless Security sections for more information on setting up your wireless network.
10D-Link DIR-615 User Manual
Section 2 - Installation

Getting Started

The DIR-615 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. You may manually congure your router without the wizard. Refer to the next page to manually setup your router.
Insert the The steps and screens are similar for the other Windows® operating systems.
If the CD autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\DIR615.exe” (where D: represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click Install and follow the on-screen instructions.
Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows® XP or Vista®.
Note: It is recommended to write down the login password on the provided CD holder.
11D-Link DIR-615 User Manual
Section 3 - Conguration
Conguration
This section will show you how to congure your new D-Link wireless router using the web-based conguration utility.

Quick Setup Wizard

To access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).
You may also connect using the NetBIOS name in the address bar (http://dlinkrouter).
12D-Link DIR-615 User Manual
Section 3 - Conguration
This wizard is designed to guide you through a step-by step process to congure your new D-Link router and connect to the Internet.
Click Next to continue.
In order to secure your new networking device, please enter a password and click Next.
13D-Link DIR-615 User Manual
Section 3 - Conguration
Select your time zone from the drop-down menu and click Next
to continue.
Select Enable Advanced DNS Services to allow this
function to improve your overall Internet experience.
Click Next to continue.
14D-Link DIR-615 User Manual
Section 3 - Conguration
Please wait while your router detects your internet connection type.
Select your Internet connection type and click Next to continue.
15D-Link DIR-615 User Manual
Section 3 - Conguration
If you selected DHCP Connection, make suer that you are
connected to the D-Link router with the PC that was originally
connected to your broadband connection. Then, click the Clone
MAC button to copy your computer’s MAC address. Click Next to
continue.
Please give your network a name using up to 32 characters.
It is highly recommended that you have a security key for your
network. If you would like the router to automatically assign a
security key, choose Automatically assign a network key or you
may choose Manually assign a network key and you may enter
your own Network key.
Click Next to continue.
16D-Link DIR-615 User Manual
Section 3 - Conguration
Once this screen appears, your setup is complete. Click Save &
Connect to reboot the router.
Before your router reboots, you will be asked if you want to
bookmark ‘D-Link Router Web Management,” click Ok to nish.
17D-Link DIR-615 User Manual
Section 3 - Conguration
Web-based Conguration Utility
To access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).
Select Admin from the drop-down menu and then enter your password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
18D-Link DIR-615 User Manual
Section 3 - Conguration

Internet Connection Setup Wizard

Once logged into the web interface of the router, the Setup > Internet page will appear. Click the Internet Connection Setup Wizard button to quickly congure your router using the setup wizard.
If you want to enter your settings without running the wizard, click Manual Internet Conguration Wizard.
19D-Link DIR-615 User Manual
Section 3 - Conguration
Click Next to continue.
Create a new password and then click Next to continue.
Select your time zone from the drop-down menu and then click Next to continue.
20D-Link DIR-615 User Manual
Section 3 - Conguration
Select the type of Internet connection you use and then click Next to continue.
If you selected Dynamic, you may need to enter the MAC address of the computer that was last connected directly to your modem. If you are currently using that computer, click MAC Address and then click Next to continue.
The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed.
Clone Your PC’s
21D-Link DIR-615 User Manual
Section 3 - Conguration
If you selected PPPoE, enter your PPPoE username and password. Click Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.
Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password. Click Next to continue.
22D-Link DIR-615 User Manual
Section 3 - Conguration
If you selected L2TP, enter your L2TP username and password. Click Next to continue.
If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue.
The Setup is now complete. Click the Connect to save your settings. Please allow 1-2 minutes to connect.
23D-Link DIR-615 User Manual
Section 3 - Conguration
Manual Conguration
Dynamic (Cable)
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your Internet type and enter the correct conguration parameters. Click the Save Settings button when you have congured the connection.
My Internet
Connection:
Enable Advanced
DNS Service:
Host Name:
Use Unicasting:
Primary/Secondary
DNS Server:
Select Dynamic IP (DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services such as Comcast and Cox.
Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features.
The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure.
Check the box if you are having problems obtaining an IP address from your ISP.
Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained automatically from your ISP. Leave at 0.0.0.0 if you did not specically receive these from your ISP.
24D-Link DIR-615 User Manual
Section 3 - Conguration
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the
MAC Address:
default MAC address unless required by your ISP. You can use the MAC address of your Ethernet card.
Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the
25D-Link DIR-615 User Manual
Section 3 - Conguration
PPPoE (DSL)
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
My Internet
Connection:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnection
Mode:
Maximum Idle
Time:
Select PPPoE (Username/Password) from the drop-down menu.
Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the next box.
Enter the ISP Service Name (optional).
Select either Always-on, On-Demand, or Manual.
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.
DNS Addresses:
MTU:
MAC Address:
Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1492 is the default MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
26D-Link DIR-615 User Manual
Loading...
+ 85 hidden pages