D Link IR513AA1 User Manual
Quick Installation Guide
Wireless N300 Mini Router
DIR-513A Mini Router
DIR-513A mode
LED Indicators:
Blue:Repeater mode
Red:Router mode
Green:AP mode
Repeater mode:
DIR-513A would relay your wireless signal to extend your wireless.
Router mode:
DIR-513A would make a local network to share your Internet access.
AP mode:
DIR-513A would change your Ethernet signal to be wireless signal for
your mobile devices.
D-link One Touch App available
Repeater mode Setting
Insert the DIR-513A into the power socket.
Wait for about 10 seconds.
Click this ico from your mobile devices and open the D-link One-Touch App
Click to Set.
Repeater Setting
Find and set the D-link DIR-513A.
Set the device password which is
used to control DIR-513A.
Change the mode to the Repeater
mode.
+Portable
+D-link One-Touch App Support
+Three modes support (Router/AP/Repeater)
+USB Power Supply
Repeater mode setting
Search for the SSID which you
want to extend and click to select.
Enter the wireless password.
DIR-513A support D-link One-Touch App for setting easily.You should
search the key of "D-link One-Touch" from Google Play Market and App
Store to download the software.
Repeater mode setting
Finish the setting and confirm the
network configuration.
Please keep the picture of setting
profile for future using.
Find and click the SSID of the "dlink-513a-z"
AP/Router mode Setting
Insert the DIR-513A into the power socket.
Wait for about 10 seconds.
Click this ico from your mobile devices and open the D-link One-Touch App
AP mode Setting
Set the device password which is
used to control DIR-513A .
Change the mode to the AP mode.
Enter the wireless name and
Encryption Key.
Select the Encryption mode which
you want to.
Click to Set.
Find and click the SSID of the "dlink-513a-z"
AP mode setting
Router mode setting
Router mode setting
Router mode setting
Finish the setting and confirm the
network configuration.
Please keep the picture of setting
profile for future using.
Set the device password which is
used to control DIR-513A .
Change the mode to the Router
mode.
Select the connection type such
as DHCP,PPPoE or Static.
Enter the wireless name and
Encryption Key.
Select the Encryption mode which
you want to.
Finish the setting and confirm the
network configuration.
Please keep the picture of setting
profile for future using.
Software upgrade mode
Click the software upgrade. Find and set D-link DIR-513A.
Enter in the user name and
password.
Start download.
Software upgrade mode
Show the rate of upgrade
progress.
TECHNICAL SUPPORTTECHNICAL SUPPORT
Finish the software upgrade.
Loading...