Bluetooth Water Sensor
DCH-T160A
Quick Install Guide
CONTENTS OF PACKAGING
BLUETOOTH WATER SENSOR
DCH-T160A
2 AAA BATTERIES
QUICK INSTALL CARD
If any of these items are missing from your packaging, please
contact your reseller.
For the full product specications, please go to
http://www.dlink.com
ENGLISH
SYSTEM REQUIREMENTS
• An internet connection from a Wi-Fi router or LTE service.
• An e-mail account (required to register for Afero
• Either a DCH-G601W hub connected to Wi-Fi, or a DCH-G601 hub connected to mobile data.
Note: The Afero
mobile app's store page to check whether your device is compatible.
DC H-T160 A
®
app is available for iPhone®, iPad®, and Android™ devices. Please refer to the
®
service)
1
SETUP EXAMPLE
The DCH-T160A Bluetooth Water Sensor allows you to be notied of the presence of water so you
ENGLISH
can stop ooding from getting out of hand from wherever you are. The following diagram shows how
you can set up your Smart Home for use with the DCH-T160A.
Cellular Tower
Internet
Router
Hub
or
Potential Wet Areas
Smartphone
with Afero
DCH-T160A
®
app
SAFETY
For your safety, please read the following precautions before installing or using your
DCH-T160A:
1. Do not take apart more than the covers of the device to attempt to repair or service it.
2. Do not completely submerge the device in liquid for an extended period of time.
3. Do not attempt to clean it with solvents. To clean the device, use a damp towel.
2
DC H-T160 A
PRODUCT SETUP
INSTALLING THE DEVICE
Please refer to the steps below to quickly get your DCH-T160A up and running.
Step 1:
Twist apart the top and bottom in opposite directions.
Lift up the top cover to remove it.
Step 2:
Insert the provided 2 AAA batteries into the bottom
cover.
Step 3:
Reattach top cover, twisting to close.
ENGLISH
DC H-T160 A
3
PRODUCT SETUP
USING THE MOBILE APP FOR SETUP
ENGLISH
Step 1:
On your mobile device, download and install the Afero® app from the
App Store or Google Play.
Step 2:
Launch the app and log into your Afero® account.
New users: Tap CREATE ACCOUNT to register for a new Afero
account.
Existing users: Tap SIGN IN to log in with your Afero® email and
password.
Step 3:
After signing in, tap the
Device, and follow the instructions.
When you are asked to scan a QR code, use the code on the
label attached to your device, or on the Quick Install Card in your
package.
®
icon in the top-left corner, then tap Add
Once the conguration process is complete, use the Afero
stay updated with instant push notications to your mobile device while you're away from home.
4
®
app to automate your home and
DC H-T160 A
TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
ENGLISH
1. HOW DO I RESET THE DCH-T160A?
Remove the DCH-T160A from your Afero
settings.
2. WHY CAN'T I CONNECT MY DCH-T160A TO MY AFERO
The DCH-G601W Wi-Fi Bluetooth Hub connected to a wireliss router with an internet connection or
the DCH-G601 LTE Bluetooth Hub with mobile data service is required. Please unsure that the hub
is connected to the internet and properly set up with your Afero
3. WHAT APP DOES THE DCH-T160A WORK WITH?
The DCH-T160A works with the Afero
Apple devices) or Google Play (for Android devices). Type “Afero” to search for the app.
3. HOW DOES THE DCH-T160A WORK WHILE I AM AWAY FROM HOME?
Remote access of the DCH-T160A is enabled once you have connected it to your hub by registering
it with your Afero
Android device.
®
account. You will be able to control it from anywhere using your iPhone, iPad or
®
account, it will change your settings back to the default
®
ACCOUNT?
®
account.
®
app. You may download the free app from the App Store (for
DC H-T160 A
5
REGULATORY STATEMENTS
FEDERAL COMMUNICATION COMMISSION
ENGLISH
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
• to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
This equipment has been tested and found to comply with the limits for a Class B digital
FCC Caution:
• Any changes or modications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
6
DC H-T160 A
INDUSTRY CANADA
Industry Canada Statement
1. This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
• This device may not cause interference
• this device must accept any interference, including interference that may cause
undesired operation of the device.
2. This Class B digital apparatus complies with Canadian ICES-003.
3. This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter, except tested built-in radios.
4. The County Code Selection feature is disabled for products marketed in the US/ Canada.
1. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
• L'appareil ne doit pas produire de brouillage
• L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
2. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada..
3. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une
autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.
4. La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés
aux États-Unis et au Canada.
ENGLISH
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm
de distance entre la source de rayonnement et votre corps.
DC H-T160 A
7
Loading...