D Link AP1350A1 User Manual

Section 3 - Configuration

DHCP Reservation

If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation.
The router will assign the IP address only to that computer or device.

Note: This IP address must be within the DHCP IP Address Range.

Enable:

Computer Name:

IP Address:

MAC Address:

Copy Your PC’s

MAC Address:

Save:

Number of

Dynamic DHCP

Clients:

Check this box to enable the reservation.

Enter the computer name or select from the drop-down
menu and click <<.

Enter the IP address you want to assign to the computer
or device. This IP Address must be within the DHCP
IP Address Range.

Enter the MAC address of the computer or device.

If you want to assign an IP address to the computer
you are currently on, click this button to populate the
fields.

Click Save to save your entry. You must click Save
Settings at the top to activate your reservations.

In this section you can see what LAN devices are
currently leasing IP addresses.

80D-Link DAP-1350 User Manual

Section 3 - Configuration

USB Settings

Use this section to configure your USB port. Share Port will be selected.

Note: If using the Network USB option, users will need to install the SharePort Utility into the computers to share the
USB device through the router.

Network USB:

Please set the Network USB Detection interval
time.

Note: Please see the SharePort Manual on the CD for
more information.

81D-Link DAP-1350 User Manual

Section 3 - Configuration

Virtual Server

The DAP-1350 can be configured as a virtual server so that remote users accessing Web or FTP services via the public
IP address can be automatically redirected to local servers in the LAN (Local Area Network).

The DAP-1350 firewall feature filters out unrecognized packets to protect your LAN network so all computers networked
with the DAP-1350 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible
from the Internet by enabling Virtual Server. Depending on the requested service, the DAP-1350 redirects the external
service request to the appropriate server within the LAN network.

The DAP-1350 is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to a
different port on the server computer.

Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are
pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to
use that particular virtual service.

For a list of ports for common applications, please visit http://www.dlink.com/support/faq/?prod_id=1191.

82D-Link DAP-1350 User Manual

Section 3 - Configuration

This will allow you to open ports (port forwarding).

Name:

IP Address:

Private Port/

Public Port:

Protocol Type:

Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.

Enter the IP address of the computer on your
local network that you want to allow the incoming
service to. If your computer is receiving an IP
address automatically from the router (DHCP),
you computer will be listed in the “Computer
Name” drop-down menu. Select your computer
and click <<.

Enter the port that you want to open next to Private
Port and Public Port. The private and public ports
are usually the same. The public port is the port
seen from the Internet side, and the private port
is the port being used by the application on the
computer within your local network.

Select TCP, UDP, or Both from the drop-down
menu.

Inbound Filter:

Schedule:

Select Allow All (most common) or a created
Inbound filter. You may create your own inbound
filters in the Advanced > Inbound Filter page.

The schedule of time when the Virtual Server
Rule will be enabled. The schedule may be set to
Always, which will allow the particular service to
always be enabled. You can create your own times
in the Tools > Schedules section.

83D-Link DAP-1350 User Manual

Section 3 - Configuration

Application Rules

Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and
others. These applications have difficulties working through NAT (Network Address Translation). Special Applications
makes some of these applications work with the DAP-1350. If you need to run applications that require multiple
connections, specify the port normally associated with an application in the “Trigger Port” field, select the protocol type
as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic.

The DAP-1350 provides some predefined applications in the table on the bottom of the web page. Select the application
you want to use and enable it.

Name:

Trigger:

Traffic Type:

Firewall:

Traffic Type:

Enter a name for the rule. You may select a
pre-defined application from the drop-down
menu and click <<.

This is the port used to trigger the application. It
can be either a single port or a range of ports.

Select the protocol of the trigger port (TCP,
UDP, or Both).

This is the port number on the Internet side
that will be used to access the application. You
may define a single port or a range of ports.
You can use a comma to add multiple ports or
port ranges.

Select the protocol of the firewall port (TCP,
UDP, or Both).

84D-Link DAP-1350 User Manual

Section 3 - Configuration

MAC Address Filter

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.

Configure MAC

Filtering:

MAC Address:

DHCP Client:

Select Turn MAC Filtering Off, allow MAC
addresses listed below, or deny MAC addresses
listed below from the drop-down menu.

Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.

Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.

85D-Link DAP-1350 User Manual

Section 3 - Configuration

Website Filters

Website Filters are used to deny LAN computers from accessing specific web sites by the URL or domain. A URL is a
specially formatted text string that defines a location on the Internet. If any part of the URL contains the blocked word,
the site will not be accessible and the web page will not display. To use this feature, enter the text string to be blocked
and click Save Settings. The text to be blocked will appear in the list. To delete the text, click Clear the List Below.

Website URL/

Domain:

Enter the keywords or URLs that you want to
block (or allow). Any URL with the keyword in
it will be blocked.

86D-Link DAP-1350 User Manual

Section 3 - Configuration

Firewall Settings

A firewall protects your network from the outside world. The D-Link DAP-1350 offers a firewall type functionality. The
SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain
types of applications. If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone.
This option will expose the chosen computer completely to the outside world.

Enable SPI:

NAT Endpoint

Filtering:

SPI (Stateful Packet Inspection, also known as
dynamic packet filtering) helps to prevent cyber
attacks by tracking more state per session. It
validates that the traffic passing through the
session conforms to the protocol.

Select one of the following for TCP and UDP
ports:
Endpoint Independent - Any incoming traffic
sent to an open port will be forwarded to the
application that opened the port. The port will
close if idle for 5 minutes.

Address Restricted - Incoming traffic must match
the IP address of the outgoing connection.

Address + Port Restriction - Incoming traffic
must match the IP address and port of the
outgoing connection.

87D-Link DAP-1350 User Manual