D Link AP1260LA1 User Manual

0 (0)

Table of Contents

Package Contents.........................................................................	4
System Requirements..................................................................	5
Introduction....................................................................................	6
Features............................................................................................	8
Hardware Overview......................................................................	9
Connections............................................................................	9
LEDs..........................................................................................	10
WPS LED/Button..................................................................	11
Installation........................................................................	12
Operation Modes........................................................................	12
Access Point Mode..............................................................	13
Wireless Client Mode..........................................................	14
Repeater Mode.....................................................................	15
Router Mode.........................................................................	16
Wi-Fi Hotspot Mode...........................................................	17
Wireless Installation Considerations....................................	18
Quick Setup Wizard....................................................................	19
Configuration....................................................................	22
Web-based Configuration Utility...........................................	22
Wireless Setup Wizard...............................................................	23
Access Point Mode..............................................................	24
Repeater Mode.....................................................................	28
Wireless Client Mode..........................................................	31
Manual Configuration...............................................................	34
Wireless Setup......................................................................	34
Access Point Mode.........................................................	35

Wireless Client Mode.....................................................	37
Repeater Mode................................................................	38
Static IP...............................................................................	39
PPPoE..................................................................................	40
PPTP....................................................................................	41
LAN Settings..........................................................................	42
Static IP...............................................................................	43
Mydlink Settings.............................................................	45
Advanced.......................................................................................	46
Access Control......................................................................	46
Advanced Wireless..............................................................	47
Wi-Fi Protected Setup........................................................	48
User Limits.....................................................................................	49
Advanced Network.............................................................	50
Maintenance.................................................................................	51
Admin......................................................................................	51
System.....................................................................................	52
Language Pack.....................................................................	53
Firmware.................................................................................	53
Time..........................................................................................	54
System Check........................................................................	55
Schedules...............................................................................	56
Status...............................................................................................	57
Device Info.............................................................................	57
Logs..........................................................................................	58
Statistics..................................................................................	59
Wireless...................................................................................	60

D-Link DAP-1260L User Manual

Table of Contents

IPv6...........................................................................................	61
Help..................................................................................................	62
Wireless Security..............................................................	63
What is WEP?.................................................................................	64
Configure WEP..............................................................................	65
What is WPA?.................................................................................	66
Configure WPA/WPA2 Personal..............................................	67
Configure WPA/WPA2 Enterprise...........................................	68
Connect to a Wireless Network........................................	69
Using Windows® XP.....................................................................	69
Configure WPA-PSK....................................................................	70
Using Windows Vista® ................................................................	72
Configure WPA-PSK....................................................................	74
Using Windows® 7........................................................................	75
Configure WPS......................................................................	78
Troubleshooting...............................................................	82
Wireless Basics..................................................................	86
What is Wireless?.........................................................................	87
Tips...................................................................................................	89
Wireless Modes............................................................................	90
Networking Basics............................................................	91
Check your IP address................................................................	91

Statically Assign an IP address	................................................92
Technical Specifications...................................................	93
Contacting Technical Support.........................................	94
Warranty............................................................................	95
Registration....................................................................	103

D-Link DAP-1260L User Manual

Section 1 - Product Overview

Package Contents

DAP-1260L Wireless N150 Cloud Access Point

Ethernet Cable

Two Detachable Antennas

Power Adapter

Quick Installation Guide

Note: Using a power supply with a different voltage rating than the one included with the DAP-1260L will cause damage and void the warranty for this product.

D-Link DAP-1260L User Manual

Section 1 - Product Overview

System Requirements

		• An Ethernet-based Network
	Network Requirements	• IEEE 802.11n/g wireless clients (AP/Repeater Mode)
	Network Requirements	• IEEE 802.11n/g wireless network (Client/Repeater Mode)
		• IEEE 802.11n/g wireless network (Client/Repeater Mode)
		• 10/100 Ethernet

		Computer with the following:
		• Windows®, Macintosh, or Linux-based operating system
		• An installed Ethernet adapter
		Browser Requirements:
	Web-based Configuration	• Internet Explorer® 7 and higher
	Utility Requirements	• Mozilla Firefox 12.0 and higher
		• Google™ Chrome 20.0 and higher
		• Apple Safari 4 and higher
		Windows® Users: Make sure you have the latest version of Java installed.
		Visit www.java.com to download the latest version.

D-Link DAP-1260L User Manual

Section 1 - Product Overview

Introduction

D-Link, an industry leader in networking, introduces the new D-Link DAP-1260L Wireless N150 Cloud Access Point. With the ability to transfer files with a maximum wireless signal rate of up to 150 Mbps*, the DAP-1260L gives you high-speed wireless network access for your home or office.

The DAP-1260L is Wi-Fi IEEE 802.11n compliant, meaning that it can connect and interoperate with other 802.11n compatible wireless client devices. The DAP-1260L is also backwards compatible with 802.11b/g. It can be flexibly configured to operate in 5 different modes Access Point, Wireless Client, Repeater, Router, or Wi-Fi HotSpot Mode. With its Setup Wizard, the DAP-1260L ensures that you will be up and running on a wireless network in just a matter of minutes.

The DAP-1260L features Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) to provide an enhanced level of security for wireless data communications. The DAP-1260L also includes additional security features to keep your wireless connection safe from unauthorized access.

The DAP-1260L supports WPS on the AP, Repeater and wireless client operation modes,with each capable of being conveniently set up by using the PIN method or Push Button.

• Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

D-Link DAP-1260L User Manual

Section 1 - Product Overview

TOTAL PERFORMANCE

Provides extended wireless technology to provide the best wireless performance.

TOTAL SECURITY

The most complete set of security features including WPA/WPA2 encryption to protect your network against outside intruders.

ULTIMATE PERFORMANCE

The D-Link Wireless N150 Cloud Access Point (DAP-1260L) is an 802.11n compliant device that delivers real world performance of up to 13X faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network to share photos, files, music, video, printers, and network storage throughout your home. Connect the DAP-1260L to a router and extend your high-speed wireless Internet signal within your home.

EXTENDED WHOLE HOME COVERAGE

This high performance Access Point provides extended coverage of wireless signal.

* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.

D-Link DAP-1260L User Manual

Section 1 - Product Overview

Features

•Faster Wireless Networking - The DAP-1260L provides up to 150 Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.

•Compatible with IEEE802.11g Devices - The DAP-1260L is still fully compatible with the 802.11g standards, so it can connect with existing 802.11g PCI, USB, and Cardbus adapters.

•Advanced Firewall Features - TheWeb-based user interface displays advanced network management features including Content Filtering, which allows easily applied content filtering based on MAC Address.

•WPS PBC- (Wi-Fi Protected Setup Push Button Configuration) Push Button Configuration is a button that can be pressed to add the device to an existing network or to create a new network. A virtual button can be used on the utility while a physical button is placed on the side of the device.

This easy setup method allows you to form a secured wireless link between the DAP-1260L and another WPS enabled device. A PC is no longer needed to log into the Web-based interface.

•WPS PIN - (Wi-Fi Protected Setup Personal Identification Number) A PIN is a unique number that can be used to add the access point to an existing network or to create a new network. The default PIN may be printed on the bottom of the access point. For extra security, a new PIN can be generated. You can restore the default PIN at any time. Only the Administrator (“admin” account) can change or reset the PIN.

•User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DAP-1260L lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Configure your access point to your specific settings within minutes.

D-Link DAP-1260L User Manual

Section 1 - Product Overview

Hardware Overview

Connections

1LAN Port Connect 10/100 Ethernet devices such as computers, switches, and hubs.

2Power Receptor Receptor for the supplied power adapter.

3	Reset Button	Hold the reset button for at least 5 seconds to reset the device back to the factory default
		settings. All the LEDs will turn on for 2 second and then begin the reboot process.

D-Link DAP-1260L User Manual

Section 1 - Product Overview

Hardware Overview

LEDs


		1	2	3	4

1	Power LED	A solid green light indicates a proper connection to the power supply.

2	Wireless LED	A solid green light indicates the wireless function is working. The light will be off during
		device reboot or if the wireless radio is disabled.

3Security LED A solid green light indicates that wireless security (WEP, WPA, WPA2) is enabled.

4LAN LED A solid green light indicates the LAN port connection is OK.

D-Link DAP-1260L User Manual

Section 1 - Product Overview

Hardware Overview

WPS LED/Button

1	WPS LED/Button	A solid light indicates a successful WPS connection. A blinking light indicates the
1	WPS LED/Button	device is trying to establish a connection.
		device is trying to establish a connection.

D-Link DAP-1260L User Manual

Section 2 - Installation

Installation

Please configure the DAP-1260L with a computer connected directly to the AP. The next few pages will explain the different operational modes you can use.

Operation Modes

Depending on how you want to use your DAP-1260L will determine which mode you use. This section will help you figure out which setting works with your setup.

•Access Point Mode (Default Mode) - page 13

•Wireless Client Mode - page 14

•Repeater Mode - page 15

•Router Mode - page 16

•Wi-Fi Hotspot Mode - page 17

D-Link DAP-1260L User Manual

Section 2 - Installation

Access Point Mode

In the Access Point mode, the DAP-1260L acts as a central connection point for any computer (client) that has a 802.11n or backward-compatible 802.11g wireless network interface and is within range of the AP. Clients must use the same SSID (wireless network name) and channel as the AP in order to connect. If wireless security is enabled on the AP, the client will need to enter a password to connect to the AP. In Access Point mode, multiple clients can connect to the AP at the same time.

D-Link DAP-1260L User Manual

Section 2 - Installation

Wireless Client Mode

In the Wireless Client mode, the DAP-1260L acts as a wireless network adapter for your Ethernet-enabled device (such as a game console or a TV set-top box). Connect your Ethernet-enabled device to the AP using an Ethernet cable. The AP Client mode can support multiple wired clients.

If you are going to connect several Ethernet-enabled devices to your DAP-1260L, connect the LAN port of the DAP-1260L to an Ethernet switch, then connect your devices to this switch.

Example: Connect a gaming console using an ethernet cable to the DAP-1260L. The unit is set to Wireless Client mode which will wirelessly connect to a wireless router on your network.

D-Link DAP-1260L User Manual

Section 2 - Installation

Repeater Mode

In Repeater Mode, the DAP-1260L increases the range of your wireless network by extending the wireless coverage of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients, APs, and the wireless router all use the same SSID (wireless network name), channel, and security settings.

D-Link DAP-1260L User Manual

Section 2 - Installation

Router Mode

In Router mode, the DAP-1260L connects to a cable or DSL modem to act as a wireless router for clients on your WLAN. In this mode, the DAP-1260L provides NAT (Network Address Translation) and a DHCP server to generate IP addresses. NAT and the DHCP server allow many computers to share the same wireless Internet connection.

D-Link DAP-1260L User Manual

Section 2 - Installation

Wi-Fi Hotspot Mode

In the Wi-Fi Hotspot Mode, the DAP-1260L wirelessly connects to a Wi-Fi Hotspot. The DAP-1260L acts as a hotspot for your wireless devices by allowing you to share a wireless connection with them as a separate personal wireless network.Your devices can access the Internet as a single device.

D-Link DAP-1260L User Manual

Section 2 - Installation

Wireless Installation Considerations

The D-Link wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

1.Keep the number of walls and ceilings between the D-Link access point and other network devices to a minimum. Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

2.Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.

3.Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless access points, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.

4.Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.

5.If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 Hz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.

D-Link DAP-1260L User Manual

Section 2 - Installation

Quick Setup Wizard

If this is your first time installing the access point, open your web browser such as Internet Explorer and enter http://dlinkap or http://dlinkap.local in the address field.

Note: If you have multiple DAP-1260L devices on the network, , you can access web-based configuration via http://dlinkapwxyz or http://dlinkapwxyz.local (wxyz represents the last four digits in the DAP-1260L’s MAC address) in the address field.

Note: If you have already configured your settings and you would like to access the configuration utility, please refer to page 23.

This wizard is designed to guide you through a step-by-step process to configure your new D-Link AP and connect to the Internet.

Select the Mode you would like to use from Access Point (AP), Wireless Client, Repeater, Router, and Wi-Fi Hotspot. Click Next to continue. The next steps will ask you to enter the settings for your Wi-Fi network such as SSID and security password.

D-Link DAP-1260L User Manual

Section 2 - Installation

If you have selected AP mode, after you have confirmed your Wi-Fi network settings, the wizard will check for Internet connectivity and then display the mydlink registration screen. To use the mydlink service (mydlink. com or the mydlink Lite app), you must have an account. Select whether you do have a mydlink account or if you need to create one. Click Next to continue.

If you do not want to register at this time, click Cancel.

Note: mydlink registration is only available in AP mode.

If you clicked Yes in the previous step, enter your mydlink account name (email address) and password. Click Sign up to register your router. You will then be taken to the mydlink website.

If you clicked No in the previous step, fill out the requested information and click Sign up to create your mydlink account. You will then be taken to the mydlink website.

D-Link DAP-1260L User Manual

Section 2 - Installation

After you have signed up for your mydlink account, you can use the mydlink portal at http://mydlink.com whether you have a Mac or a PC. You can also use the mydlink App for your smartphone or tablet device.

The mydlink App will allow you to receive notices, browse network users, and configure your router from an iPhone/iPad/iPod Touch (iOS 3.0 or higher), Android device (1.6 or higher).

To download the mydlink lite App, visit the Apple Store, Google Play, or http://mydlink.com/Lite.

D-Link DAP-1260L User Manual

Section 3 - Configuration

Configuration

This section will show you how to configure your new D-Link wireless access point using the web-based configuration utility.

Web-based Configuration Utility

If you wish to change the default settings or optimize the performance of the DAP-1260L, you may use the webbased configuration utility.

To access the configuration utility, open a web browser such as Internet Explorer and enter http://dlinkap, http://dlinkap.local, http://dlinkapwxyz, or http:// dlinkapwxyz.local (wxyz represents the last four digits in the DAP-1260L’s MAC address) in the address field.

Select Admin and then enter your password. Leave the password blank by default.

If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.

D-Link DAP-1260L User Manual

Section 3 - Configuration

Wireless Setup Wizard

Click Launch Wireless Setup Wizard to configure your access point.

If you want to enter your settings without running the wizard, skip to page 41.

Click Next to continue.

D-Link DAP-1260L User Manual

Section 3 - Configuration

Access Point Mode

This Wizard is designed to assist you in configuring your DAP-1260L as an access point.

Select Access Point from the drop-down menu. Then, click Next to continue.

Click Next to continue.

D-Link DAP-1260L User Manual

Section 3 - Configuration

Enter a name for your wireless network (SSID).

Enter your network key. This key must be entered on your wireless clients.

Click Next to continue.

Enter your password and click Next.

Select your time zone from the drop-down menu and click Next.

D-Link DAP-1260L User Manual

Section 3 - Configuration

The following screen will show you your network name and password to enter on your wireless clients.

Click Save to finish the Setup Wizard.

After the wizard has detected Internet connectivity, the mydlink registration screen will appear. To use the mydlink service (mydlink.com or the mydlink Lite app), you must have an account. Select whether you have a mydlink account or if you need to create one. Click Next to continue.

If you do not want to register at this time, click Cancel.

Note: mydlink registration is only available in AP mode.

D-Link DAP-1260L User Manual

Section 3 - Configuration

If you clicked Yes, enter your mydlink account name (email address) and password. Click Login to register your router.

If you clicked No, fill out the requested information and click Sign up to create your mydlink account. You will then be taken to the mydlink website.

D-Link DAP-1260L User Manual

Section 3 - Configuration

Repeater Mode

This Wizard is designed to assist you in configuring your DAP-1260L as a repeater.

Select Repeater from the drop-down menu.

Select WPS as the configuration method only if your wireless device supports Wi-Fi Protected Setup (WPS). For Manual setup, skip to the next page.

Click Next to continue.

On the device you want to connect to, start the PBC process on the device. You will have 2 minutes to start the PBC process on both devices.

D-Link DAP-1260L User Manual

Section 3 - Configuration

Select Manual configuration to set up your network manually.

Click Next to continue.

Please wait while the DAP-1260L scans for available Wi-Fi networks.

Find your router or access point from the list, click the radio button in the right column to select it, and click

Connect.

D-Link DAP-1260L User Manual

Section 3 - Configuration

If you have selected a Wi-Fi network with WEP or WPA/ WPA2, enter the Wi-Fi password.

Click Next to complete the Setup Wizard.

Give your extended network a new name for your wireless network (SSID). You can also instead use the same SSID and passphrase as the Wi-Fi network you have connected to. Click Next to continue.

The Wireless Setup Wizard is complete. Click Finish to reboot the device.

D-Link DAP-1260L User Manual

+ 73 hidden pages