D Link AP1250A1 User Manual
DAP-1250
System Requirements
• A Network with 802.11g/b wireless devices
Package Contents
• Access Point
• Antenna
Please follow below table to install DAP-1250 , otherwise, it may be illegal.
Antenna No. Type Frequency Band Gain (dBi) Conntector
ANT24-0800 Dipole Omni
ANT24-1201 Yagi Directional
ANT24-1400 Panel Directional
ANT24-1800 Panel Directional
ANT24-1801 Yagi Directional
ANT70-0800 Dipole Omni
2400MHz
- 2500MHz
2400MHz
- 2500MHz
2300MHz
- 2500MHz
2400MHz
- 2500MHz
2400MHz
- 2700MHz
2400MHz
- 2500MHz
4900MHz
- 5470MHz
8 N female 7m 6
N female or
12
SMA femal
14 N female 14m 12
18 N female 18.7m 16
18 N female 18.7m 16
8
N Jack 7m
8
ｃable
Length
11.7m 10
cable
loss
6
6
ANT70-0801 Dipole Omni
ANT70-1000 Panel Directional
WSS002
N/A Printed
• CD-ROM (with software, manual, and warranty)
• Ethernet Cable
• 5V/2A Power Adapter
• Rubber Feet
1/4 入 Dipole
2400MHz
- 2500MHz
4900MHz
- 5470MHz
2400MHz
- 2500MHz
4900MHz
- 5875MHz
2400MHz
- 2500MHz
2400MHz
- 2500MHz
8
N Jack 7m
8
8
N Jack 7m
10
2 RP-SMA(M) 0 0
2 N/A N/A N/A
6
6
6
8
• A Network with 802.11g/b wireless devices
Before You Begin
It’s best to use a computer (with an Ethernet adapter) that is connected to a
switch or router for configuring the DAP-1250. The default IP address for the
DAP-1250 is 192.168.0.50 with a Subnet Mask of 255.255.255.0.
You will need to assign your computer a Static IP address within the same
range as the DAP-1250’s IP address for the purpose of configuring the
DAP-1250. See the Appendix if you need assistance in assigning a Static IP
address for your network adapter.
Loading...