dji Spreading Wings S800 User Manual
1
Spreading Wings S800
User Manual
V 1.0
www.dji-innovations.com
2
Disclaimer
Read this disclaimer carefully before using Spreading Wings S800. By using this product, you hereby
agree to this disclaimer and signify that you have read them fully. Spreading Wings S800 is an excellent
multi-rotor. With a good autopilot, it will offer tremendous flight features. Despite the controller of DJI
autopilot operate in the safest manner when the main power battery is connected, we strongly
recommend customers to remove all frame arms, and keep children away during system calibration and
parameter setup. Dajiang Innovation Technology Co. Ltd. (DJI) assumes no liability for damage(s) or
injuries incurred directly or indirectly from this product usage.
S800 Profile
DJI Spreading Wings S800 is a multi-rotor designed for AP. It simplifies users’ installation and enables
quick disassembling. Frame arm integrates with ESC and motor. With DJI WKM autopilot system, it can
achieve hovering, cruising and other flight elements. S800 can be applied for aerial photography and
other aero-modeling activities.
415
mm
(
Width
)
500
mm
(
Length
)
240
mm
(
Diameter
)
350
mm
(
Lenghth
)
320
mm
(
Height
)
145mm
(
Top Width)
3
Contents
Disclaimer .......................................................................................................................2
S800 Profile ....................................................................................................................2
Contents .........................................................................................................................3
Product Usage Cautions.................................................................................................4
In Box .............................................................................................................................5
Tools Needed .................................................................................................................5
Center Frame Wiring ......................................................................................................6
Mount Center Frame ......................................................................................................7
Mount Frame Arms .........................................................................................................8
Mount Bi-pod ................................................................................................ ................ 10
Assembly ................................................................ ...................................................... 12
ESC Sound ................................................................................................................... 13
Specifications ............................................................................................................... 13
Appendix ...................................................................................................................... 15
4
Product Usage Cautions
When flying, the fast rotating propellers of S800 may cause serious damage(s) and injuries.
Therefore, please fly with a high safety in mind at all time.
Mount Attention
Mount GPS with a bracket, to avoid interference from the power board of center frame.
For IMU position, make sure the arrow direction marking is pointing to the aircraft nose.
Mount the arms correctly.
Center frame Arm
Center frame Arm
For removing screws in the bottom board, please proceed with cautious, avoiding
damages. Do not remove any other screws fixed with glue.
Notice matching the indications is very important, please pay attention to them.
Flight Attention
Keep flying multi-rotor a distance from people, building, high-voltage lines, etc.
Do not get close to or touch the working motors and propellers, which will cause serious
injury.
Do not over load the multi-rotor.
Make sure the propellers and the motors are installed correctly and firmly before flying.
Make sure all parts of S800 are in good condition before each flight. Do not fly with wore or
broken parts.
Strongly recommend you use DJI parts as much as possible.
Others
If you have any problem you cannot solve, please contact agents or DJI customer service.
5
In Box
Center Frame 800CF×1
Frame Arm 800FA×6
H Frame 800HF ×1
T Frame 800TF×2,Aluminum Ring 800AR×2
Base Pipe 800BP×2
Bi-pod Drawbar 800BD×4
Silicone Rubber Damper 800SRD×4
Nonslip Damper 800ND×4
3-PIN Servo Cable 800SC ×1
Screw Package 800SP ×1
Hexagonal screws: M2.5×5
Hexagonal socket head cap screws:
HC-M2.5×5, HC-M2.5×8, HC-M3.0×22
Adhesive Velcro 800AV ×1, Battery Band 800BB ×2, Spare Screw Package 800SSP ×1
Tools Needed
2.0mm Hex Wrench, 2.5mm Hex Wrench
For mounting screws.
Screw Glue
For fastening screws.
Nylon Cable Tie
For binding devices and wires.
Scissors
Diagonal Cutting Pliers
Foam Double Sided Adhesive Tape
For fixing receiver, controller and other modules.
Loading...