Page 1
OSMO
Tripod
Quick Start Guide
V1.0
Page 2
Disclaimer and Warning
Congratulations on purchasing your new DJI
product. The information in this document
affects your safety and your legal rights and
responsibilities. Read this entire document carefully
to ensure proper conguration before use. Failure
to read and follow instructions and warnings in this
document may result in serious injury to yourself or
others, damage to your DJI product, or damage to
other objects in the vicinity. This document and all
other collateral documents are subject to change
at the sole discretion of DJI. For up-to-date product
information, visit http://www.dji.com and click on the
product page for this product.
By using this product, you hereby signify that you
have read this disclaimer and warning carefully
and that you understand and agree to abide by the
terms and conditions herein. You agree that you
are solely responsible for your own conduct while
using this product, and for any consequences
thereof. You agree to use this product only for
purposes that are proper and in accordance with
all applicable laws, rules, and regulations, and
all terms, precautions, practices, policies and
guidelines DJI has made and may make available.
DJI accepts no liability for damage, injury or any
legal responsibility incurred directly or indirectly
from the use of this product. The user shall observe
safe and lawful practices including, but not limited
to, those set forth in this document.
Introduction
The Tripod for the Osmo is used with the Extension
Rod to form a stable shooting platform. Its legs
unfold outwards and further extend to form a larger
base. The Tripod folds into a compact cylinder
shape for easy transportation.
Page 3
Specications
Dimensions (Legs collapsed)
Radius: 160 mm, Height: 45 mm
45 mm
160 mm
Dimensions (Legs extended)
Radius: 260 mm, Height: 58 mm
58 mm
260 mm
Weight: 254 g
Installation
1. Screw the Tripod into the Extension Rod (sold
separately). Then, slide the lock on the Tripod to
the locked position.
3
1
2
Page 4
2. Unfold the legs (extend them if desired).
3. Attach the Osmo handle to the Extension Rod's
top rosette mount and then tighten the knob to
secure.
Ensure the lock on the Tripod is in the
unlocked position before unscrewing the
Extension Rod.
WARNING
Always place the Tripod on a at and stable surface
to prevent the Osmo from tipping over.
The content is subject to change.
Download the latest version from
www.dji.com/product/osmo
If you have any questions about this document, please contact
DJI by sending a message to DocSupport@dji.com.
2015 DJI. All Rights Reserved.
©
Loading...