
Disclaimer and Warning
Congratulations on purchasing your new DJITM product. The
information in this document affects your safety and your legal
rights and responsibilities. Read this entire document carefully to
ensure proper conguration before use. Failure to read and follow
instructions and warnings in this document may result in serious
injury to yourself or others, damage to your DJI product, or damage
to other objects in the vicinity. This document and all other collateral
documents are subject to change at the sole discretion of DJI. For
up-to-date product information, visit http://www.dji.com and click on
the product page for this product.
By using this product, you hereby signify that you have read this
disclaimer and warning carefully and that you understand and
agree to abide by the terms and conditions herein. You agree
that you are solely responsible for your own conduct while using
this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in
accordance with all applicable laws, rules, and regulations, and
all terms, precautions, practices, policies and guidelines DJI has
made and may make available.
DJI accepts no liability for damage, injury or any legal responsibility
incurred directly or indirectly from the use of this product. The user
shall observe safe and lawful practices including, but not limited to,
those set forth in this document.
DJI is a trademark of SZ DJI Technology Co., Ltd. (abbreviated
as “DJI”) and its affiliated companies. Names of products,
brands, etc., appearing in this manual are trademarks or
registered trademarks of their respective owner companies.
1

Introduction
The OsmoTM Battery Checker provides battery level indicators
for users to instantly check the remaining charge of their Osmo
Batteries.
Usage
Place the Osmo Battery into the slot of the Battery Checker and
the indicator LEDs will show the current battery level. Refer to
the table below for more information about the blinking patterns.
Slot
Battery Level Indicators
Battery Level Indicator Description
: The LED is solidly lit : The LED is blinking
: The LED is off
LED1 LED2 LED3 LED4 Battery Level
2
>87.5%
75% to 87.5%
62.5% to 75%
50% to 62.5%
37.5% to 50%
25% to 37.5%
12.5% to 25%
<12.5%

FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
EU Compliance Statement
SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of the EMC Directive.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer, Germany
DJI Support:
www.dji.com/support
Manufactured by:
SZ DJI Technology Co., Ltd.
14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, China
The content in this document is subject to change.
Download the latest version from
www.dji.com/product/osmo
If you have any questions about this document, please contact DJI
by sending a message to DocSupport@dji.com.
OSMOTM is a trademark of DJI.
Copyright
2016 DJI All Rights Reserved.
©