The OSMOTM+ is a professional handheld gimbal
camera that combines mobility and stability in one
device. Its camera features an optical zoom lens
providing 3.5x optical zoom and 2x lossless digital
zoom. It shoots sharp 12MP still photos and stable
video at up to 4K. A mobile device can be mounted on
the side of the handle to display a live feed from the
camera through a high-speed Wi-Fi video link.
1
15
2
14
13
3
45
6
7
1 Camera
2 Roll Motor
3 Pan Axis Lock
4 Camera Status LED
5 Joystick
6 Shutter Button
7 Mobile Device Holder
8 Record Button
9 Power Switch
12
11
10
98
10 System Status LED
11 Gimbal Securing Ring
12 Pan Motor
13 Camera Micro USB Port
14 Micro SD Card Slot
15 Tilt Motor
16
17
18
1920
23
2122
16 Air Vents
17 Built-in Microphone
18 External Microphone Input
19 Trigger
20 DJI Rosette Mount
21 Lanyard Hole
22 Battery Cover
23 Flexi Microphone
Specifications
●
Handle
Dimensions 2.4×1.9×6.4 inches
Weight (including battery) 201 g
Supported Mobile Device Max Size: 6.2 (L) × 3.1 (W) inches
158.2 (L) × 77.9 (W) mm
●
Gimbal
ModelZenmuse X3 ZoomWeight268 g
Output Power (with camera)
Angular Vibration Range ±0.02°MountDetachableControllable RangeTilt: -35° to +135°
Pan: ±320°; Roll: ±30°
Mechanical Range Tilt: -50° to +140°
Pan: ±330°; Roll: -50° to +90°
Max Controllable Speed 120°/s
●
Camera
ModelX3 ZOOM / FC350Z
Sensor1/2.3” CMOS
Effective pixels:12.40 M
(Total pixels: 12.76 M)
Lens 3.5× Optical Zoom,
22
F2.8 (Wide)
FOV 92° (Wide)- 35° (Tele)
Focus: 0.5 m to infinity
ISO Range100
Electronic Shutter Speed 8 s
Max Image Size4000×3000 pixels
Still Photography Modes Single Shot
Photo Burst Mode: 3/5/7 shots
Auto Exposure Bracketing (AEB):
3/5 bracketed frames @ 0.7 EV bias
Interval
Auto Panorama
Selfie Panorama
Video Resolution UHD: 4K (4096×2160) 24/25p
4K (3840×2160) 24/25/30p
2.7K (2704×1520) 24/25/30p
Video Recording Modes Auto; Slow Motion
Max Video Bitrate 60 MbpsSupported File Systems FAT32 (≤ 32 GB) ; exFAT (> 32 GB)
Photo Formats JPEG, DNG (RAW)
Class 10 or UHS-1
Operating Temperature 32° to 104° F (0° to 40° C
Audio Output 48 KHz; AAC
●
WiFi Video Link
Operating Frequency 2.412
Max Transmission Distance
Transmitter Power (EIRP) 2.4G: 8 dBm; 5G: 12 dBm
●
Intelligent Battery
ModelHB02-542465TypeLiPoCapacity 1225 mAh
Energy 14.1 Wh
Voltage 11.55 V
Charging Temperature 41° to 104° F (5° to 40° C
Operating Temperature 32° to 104° F (0° to 40° C
●
Battery Charger
ModelOS1C11Input100Output12.6/13.2 V, 0.8 A
●
Flexi Microphone
Sensitivity -32 ± 3 dB (0 dB =1 V/Pa)
Frequency Response 100
Signal-to-Noise Ratio 60 dBA
Pin Diameter 3.5 mm
Length 88 mm
Weight 4 g
-
2.462 GHz; 5.180
82 feet (25 m
-
240 V; 50/60 Hz
-
10000 Hz
)
-
)
5.805 GHz
)
)
Optional Accessories
Extension Rod TripodOsmo Z-Axis
DJI provides various optional accessories for the Osmo+. Visit the
DJI Online Store for more information:
http://store.dji.com
1. Install the DJI GO App
Search for ‘DJI GO’ on the App Store or Google Play,
or scan the QR code to download the app on your
mobile phone.
●
DJI GO supports iOS 8.0 (or later) and Android 4.3 (or later).
2. Prepare the Battery
Fully charge the battery before using it for the first time. Insert the battery as shown.
Battery Level
Low
High
●
Charge Time: ~110 minutes.
●
The LED indicator will become solid green when charging is
complete.
3. Mount your Mobile Device
Unfold the arms
Adjust the pads
Place one end
1
2
Pull outwards
Rotate to desired angle
3
Place the other end
●
Ensure your mobile device is fully seated.
4. Unlock the Gimbal
1
1. Rotate the tilt motor
2
2. Slide the Pan Axis Lock up
5. Connect to the DJI GO App
To Power On:
Pull down on the switch
Pull down again > Sleep
Pull down and hold for 1.5 s > Power Off
Turn on your mobile's WiFi and
connect to OSMO_XXXXXX
OSMO_XXXXXX
Default password: 12341234
DJI GO
Internet
App
Launch the app and tap Camera.
Activate the Osmo+ when using it for the first time.
This requires an internet connection.
6. Controls
●
Use the joystick to pan or tilt
the camera.
●
Position the camera
directly by hand.
●
Record Button
Press once to start recording, and
again to stop recording.
●
Shutter Button
Press once to take a photo. Press
and hold for burst capture.
●
Trigger
Hold down the trigger and push
the joystick up and down to
zoom.
Hold down to enable Lock Mode.
Tap twice to center the camera.
Tap three times to enter Selfie
Mode.
●
SmoothTrack Mode is enabled automatically to
smooth out jerky movements.
●
The Osmo+ will beep slowly if the gimbal is locked
after it is turned on. This means the camera is
working normally but the gimbal is shut off.
●
If you need to unlock the gimbal after it is turned on,
you must rotate the pan motor after unlocking the tilt
motor and pan motor to reactivate the gimbal.
For more information, read the User Manual:
http://www.dji.com/product/osmo-plus
※This content is subject to change without prior notice.