DJI CP.ZM.000425-RST-01 Quick Start Guide

OSMO

Quick Start Guide

V1.0

Overview

The Osmo is a professional handheld gimbal that
combines

mobility and stability in one device. Its
camera shoots sharp 12MP still photos and stable
video at up to 4K. Your mobile device can be mounted
on the side of the handle and display a live feed
through the high-speed WiFi video link.

14

13

12

1 1

10

9

1 Tilt Motor

2 Micro USB Port

3 Pan Motor

4 Pan Axis Lock

5 Gimbal Lock

6 System Status LED

7 Power Switch

8 Record Button

9 Mobile Device Holder

1

2

3
4
5
6
7

8

10 Shutter Button

11 Joystick

12 Camera Status LED

13 Roll Motor

14 Camera

15

16

17

23
22

2 1

20

19

18

15 Air Vents

16 UV Filter

17 Micro SD Card Slot

18 Battery Cover

19 Lanyard Hole

20 Rosette Mount

21 Trigger

22 External Microphone Input

23 Built-in Microphone

Specifications

●

Handle

Dimensions 2.4×1.9×6.4 inches

Weight (including battery) 201 g

●

Gimbal

Model Zenmuse X3
Weight 221 g

Output Power (with camera)

Angular Vibration Range ±0.03°
Mount Detachable
Controllable Range Tilt: -35° to +135°

Pan: ±320°; Roll: ±30°
Mechanical Range Tilt: -90° to +150°

Pan: ±330°; Roll: -50° to +90°

Max. Controllable Speed 120°/s

●

Camera

Model X3/FC350H

Sensor Sony Exmor R CMOS; 1/2.3”

Effective pixels: 12.40 M

Lens 94° FOV 20 mm

f/2.8

Focus: 3.5 m

(Suitable Range: 1.5 m to infinity)

ISO Range 100-3200 (video); 100-1600 (photo
Electronic Shutter Speed 8 s-1/8000 s

Max. Image Size 4000×3000 pixels
Still Photography Modes Single Shot

Photo Burst Mode: 3/5/7 shots

Auto Exposure Bracketing (AEB):

3/5 bracketed frames @ 0.7 EV bias

Interval
Timelapse

Auto Panorama

Selfie Panorama
Video Resolution UHD: 4K (4096×2160) 24/25p

4K (3840×2160) 24/25/30p

2.7K (2704×1520) 24/25/30p

HD: 1280×720 24/25/30/48/50/60p
Video Recording Modes Auto; Slow Motion

Max. Video Bitrate 60 Mbps
Supported File Systems FAT32 (≤ 32 GB) ; exFAT (> 32 GB)
Photo Formats JPEG, DNG (RAW)

(

61.8×48.2×161.5 mm

)

Static: 9 W; Dynamic: 11 W

(

Total pixels: 12.76 M

(

35 mm format equivalent)

(

up to 30 s when camera is in M mode

)

FHD: 1920×1080 24/25/30/48/50/60/120p

)

)

Video Formats MP4/MOV (MPEG-4 AVC/H.264)
Supported SD Cards Micro SD; Max. Capacity: 64 GB;

Class 10 or UHS-1
Operating Temperature 32° to 104° F (0° to 40° C
Audio Output Two channel; 48 KHz; AAC

●

WiFi Video Link

Operating Frequency 2.412-2.462 GHz; 5.180-5.805 GHz

Max. Transmission Distance

Transmitter Power (EIRP) 2.4G: 8 dBm; 5G: 12 dBm

●

Intelligent Battery

Model HB01-522365
Type LiPo
Capacity 980 mAh

Energy 10.8 Wh

Voltage 11.1 V
Charging Temperature 59° to 104° F (15° to 40° C
Operating Temperature 14° to 122° F (-10° to 50° C

●

Battery Charger

Model SOY015A-1260120
Input 100-240 V; 50/60 Hz
Output 12.6 V; 1.2 A

82 feet (25 m

)

)

)

)

Optional Accessories

Extension Rod

Bike Mount

Tripod

Vehicle Mount

Visit the DJI Online Store for more information:

http://store.dji.com

1. Install the DJI GO App

Search for ‘DJI GO’ on the App Store or Google
Play, and install the app on your mobile device.

●

DJI GO supports iOS 8.0 (or later)
or Android 4.1.2 (or later).

2. Prepare the Battery

Fully charge the battery for the first time to activate.
Insert the battery as shown.

Battery Level

Low

High

●

Charge Time: ~1 hour.

●

The LED indicator will glow green when charging is

complete.

3. Mount your Mobile Device

Unfold the arms

Adjust the pads

Place one end

1

2

Pull outwards

Rotate to desired angle

3

Place the other end

●

Ensure your mobile device is fully seated.

4. Unlock the Gimbal

1

1. Rotate the tilt motor

2. Rotate the roll motor

2

3

3. Slide the Pan Axis Lock up

●

Follow the order above to avoid damaging the camera.

●

Rotate the motors just enough to loosen them.

5. Connect to the DJI GO App

To Power On:
Pull down on the switch

Pull down again > Sleep
Pull down and hold for 1.5 s > Power Off

Turn on your mobile's WiFi and
connect to OSMO_XXXXXX

OSMO_XXXXXX

DJI GO

App

Default password: 12341234

Launch the app and tap
Enter Camera View.

Activate the Osmo if you are using it for the first time.
This requires an internet connection.

Internet

6. Controls

●

Position the camera

directly by hand.

●

Trigger

Hold down to enable Lock Mode.
Tap twice to center the camera.
Tap three times to enter Selfie

Mode.

●

SmoothTrack Mode is enabled automatically to
smooth out jerky movements.

●

The Osmo will beep slowly if the gimbal is locked
after it is turned on. This means the camera is
working normally but the gimbal is shut off.

●

If you need to unlock the gimbal after it is turned on,
you must rotate the pan motor after unlocking the tilt
motor and pan motor to reactivate the gimbal.

●

Pan or tilt the camera with

the joystick.

●

Record Button

Press once to start recording,
and again to stop recording.

●

Shutter Button

Press once to take a photo.

For more information, read the User Manual:

www.dji.com/product/osmo

※This Quick Start Guide is subject to

change without prior notice.

©2015 DJI. All Rights Reserved.

Designed by DJI. Printed in China

OSMO

www.dji.com