DJI CP.OS.00000020.01 Users Manual

OSMO ACTION
User Manual
v1.0
2019.05
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe Acrobat
Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that
section.
Printing this Document
This document supports high resolution printing.

Using this Manual

Legend

Important Hints and Tips

Read Before First Use

Read the following documents before using OSMOTM Action:
1. User Manual
2. Disclaimer and Safety Guidelines
It is recommended to watch all tutorial videos on the ocial DJITM website (www.dji.com/osmo-action)
or in the DJI Mimo app and read the user manual and the disclaimer and safety guidelines before using
for the rst time.

Downloading the DJI Mimo App

Scan the QR code or search for "DJI Mimo" on the App Store or Google Play.
The Android version of DJI Mimo is compatible with Android v6.0 and later. The iOS version of DJI Mimo is compatible with iOS v10.0 and later.
2
© 2019 DJI OSMO All Rights Reserved.
Contents
Using this Manual
Legend 2
Read Before First Use 2
Downloading the DJI Mimo App 2
Introduction
Overview 4
Attaching the Battery 5
Activating Osmo Action 5
Charging Osmo Action
Operation
Button Features 6
Operating the Touchscreen 8
Storing Photos and Videos 10
Status LED Descriptions 10
DJI Mimo App 11
Updating Firmware
Maintenance
Underwater Usage Notes 14
Clean Notes 14
2
4
6
6
13
14
Specications
After-Sales Information
© 2019 DJI OSMO All Rights Reserved.
15
15
3
OSMO ACTION User Manual

Introduction

Osmo Action is a dual screen action camera equipped with DJI’s latest RockSteady EIS technology and
can shoot sharp 12MP photos, capture stable video at up to 4K/60fps, and is also able to record HDR
video. The back screen is a hyper-responsive touchscreen that enables users to change settings while
the front screen helps to take the perfect sele. Complete with voice control, custom modes, a Quick
Switch button and SnapShot feature, users can power on and take photos and record videos within a
couple of seconds. Osmo Action is also waterproof, allowing it to be used at depths of up to 11 m. It
is also compatible with several accessories so users can expand their creative possibilities using Osmo
Action.

Overview

1 2
3
4
5
6
14
13
12
11
10 9
8 7
1. Shutter/Record Button
2. Status LED I
3. Lens Filter Cap
4. Front Screen
5. Lens
6. Ventilation Area
7. Status LED II
8. microSD Card Slot
9. USB-C Port
10. Cover Release Button
11. USB-C Cover
18
15
17
16
12. Quick Switch Button
13. Power Button
14. Microphone I
15. Touchscreen
16. Speaker
17. Air Pressure Balance Hole
18. Microphone II
19. Battery Release Button I
20. Battery Release Button II
19
21 20
21. Battery
The Lens filter cap and ventilation area may become hot during use. To avoid scalding, DO NOT touch.
For the best waterproof performance, do not detach the lens filter cap unless necessary.
4
© 2019 DJI OSMO All Rights Reserved.
OSMO ACTION User Manual
01:42
04:37
01:42
OSMO ACTION

Attaching the Battery

The camera frame is mounted by default and must be removed before attaching the battery.
Insert the battery as shown. Press both sides of the battery to make sure it is properly inserted. Note
that if the battery is properly inserted, the orange marks on either side of the battery are not visible.

Activating Osmo Action

DJI MIMO
OSMO POCKET
Learn how to take easy Timelapse shots with Osmo Pocket
#Tutorial
00:16
Quickly master 3X3 panorama shots
#Pano Mode
Learn to use Story Mode and create fun videos
#OSMO POCKET
Learn how to take easy My Story shots
#OSMO POCKET
When using Osmo Action, activation is required through DJI Mimo. Follow the steps below to
activate.
1. Press and hold the power button to power on.
2. Enable Bluetooth on your mobile device.
3. Launch DJI Mimo and tap in the top-left corner, and follow the instructions to activate Osmo
Action.
© 2019 DJI OSMO All Rights Reserved.
5
OSMO ACTION User Manual

Charging Osmo Action

Press the cover release button on the USB-C cover and slide the cover down.
To charge Osmo Action, connect a USB adapter (not included) to the USB-C port using the power
cable (included). The status LEDs are solid red while charging. The battery is fully charged when the
status LEDs turn o.
Charging time: approx. 1 hour 30 minutes (using a USB adapter of 5 V/2 A)*
If charging Osmo Action with the camera frame mounted, it is recommended to detach the USB-C
cover for convenience. To remove, pull the USB-C cover towards the Quick Switch button until it
detaches.
*Charging time is for reference only.

Operation

Button Features

Power Button
6
© 2019 DJI OSMO All Rights Reserved.
OSMO ACTION User Manual
Power Button
When Osmo Action is powered o, press the power button to power on.
When Osmo Action is recording or connected to DJI Mimo, press the power button to turn off the
touchscreen. Press again to turn on the touchscreen. Note that if Osmo Action is recording when the
touchscreen is turned o, it will continue to record.
When Osmo Action is idle while powered on and not connected with DJI Mimo, press the power button
to enter sleep mode. Press again to exit sleep mode.
When Osmo Action is powered on, press and hold the power button to power o.
Shutter/Record Button
Shutter/Record Button
Press to take photos or to start or stop recording.
SnapShot: available when the device is powered o or in sleep mode. SnapShot mode can be set in
SnapShot settings. Refer to the Operating the Touchscreen section for more information.
Quick Switch Button
Quick Switch Button
In camera view, press to select the shooting mode and the Quick Switch menu will appear. Tap an icon
to select a shooting mode.
In setting pages or playback, press to return to camera view.
Press and hold to switch between the front screen and touchscreen camera view.*
* If the screen is switched while recording a video, the video will stop recording and a new video
recording will begin.
© 2019 DJI OSMO All Rights Reserved.
7
OSMO ACTION User Manual

Operating the Touchscreen

The following instructions are only applicable to the touchscreen. They will not work on the front screen.
Swipe Down
Create/Manage Custom Mode
Tap and tap the icon again to save the current conguration as a custom mode. Up to ve custom
modes can be saved. Swipe left and right to choose a saved custom mode. Tap Delete in the bottom-
right corner to delete a mode.
Brightness
Tap and move the slider to adjust the brightness.
Screen Lock
Tap to lock the screen. To unlock the screen, tap on the screen and move the slider.
Settings
Quick Actions
1. Voice Control: enable voice control to use Osmo Action with voice commands. Voice commands include Start Recording, Stop Recording, Take Photo, Screen Switch, and Shut Down. English and
Chinese Mandarin are supported.
2. SnapShot: when Osmo Action is powered o or in sleep mode, use SnapShot to quickly power on and begin shooting. Supported shooting modes include Video, Photo, Slow Motion, HDR Video, Burst, Timed, AEB, Custom mode, and Timelapse.
3. Quick Switch: use Quick Switch to quickly swap between modes, and custom settings. Shooting modes supported include Video, Photo, Slow Motion, HDR Video, Burst, Timed, AEB, Custom mode, and Timelapse.
General
1. Wireless Connection: tap to check the camera name and password in Wireless Info, set the Wi-Fi Frequency, and reset the Wi-FI password and all connections in Reset Connection.
2. Wind Noise Reduction: tap to enable or disable wind noise reduction.
3. Sounds: choose from high, medium, low, and o.
4. Grid: tap to enable or disable grid.
5. Face-Oriented Exposure: when a face is detected, exposure on the face is prioritized.
6. Anti-Flicker: prevent the ickering of lights by selecting the frequency according to local regulations.
7. Screen Auto Sleep: tap to set the time before Osmo Action enters sleep mode.
8. Auto Power O: tap to set the time before Osmo Action powers o automatically.
8
© 2019 DJI OSMO All Rights Reserved.
OSMO ACTION User Manual
AUTO
9. LED: turn the two status LEDs on Osmo Action on or o.
10. Language: set the language to English, Simplied Chinese, Traditional Chinese, Japanese, Korean,
German, or French.
11. Date/Time: tap to set date and time.
12. Format SD Card: tap to format microSD card.
13. Factory Reset: tap to reset default settings.
14. About: tap to view name, serial number, rmware version, and regulatory info.
Screen Flip
Tap
to switch the screen orientation to up, down, or automatic.
Spot Metering
Tap ON to enable or disable spot metering. Tap and hold the screen to use spot metering. Tap again to
enable AE lock, and tap and hold the screen to disable AE lock.
Voice Control
Tap ON to enable or disable voice control.
Front Screen Settings
Tap to switch between full screen and letterbox display.
Swipe Up
Swipe up and then swipe left or right to set parameters such as photo ratio, countdown time, and
resolution. In Video mode, tap RockSteady* to enable or disable electronic image stabilization. Note that
the parameters depend on the shooting mode and that RockSteady is unavailable in certain resolutions.
* RockSteady requires a rmware update.
Swipe Left
Exposure Parameter Settings
In Auto mode, the EV and Max. ISO value can be set. The ISO value is adjusted automatically within the
setting range during use.
In Manual mode, the shutter speed and ISO value can be set. Note that the Max. ISO value can only be
set when the ISO value is set to auto.
/ Image/Video Settings
Set white balance, select the color mode between Normal and D-Cinelike*, turn Dewarp on or o, and
choose format.
* D-Cinelike provides greater data retention of color and brightness, which allows for more exibility in
post-production.
© 2019 DJI OSMO All Rights Reserved.
9
OSMO ACTION User Manual
Swipe Right
Swipe right and then swipe left or right to scroll through photos and videos. Tap to playback videos. Tap
the corresponding icon to add favorites or delete photos or videos. Tap at the top left top to view
photo and videos by category.
When viewing a photo, move the slider on the left side of the screen up or down to adjust the
brightness. Tap the icon
in the bottom-middle to view timed and burst photos.
16:9
When viewing a video, move the slider on the left side of the screen up or down to adjust the brightness
and move the slider on the right side to adjust the volume. Drag the progress bar to watch the video.
Tap
Tap the icon on the bottom-left corner on camera view to select shooting modes.
Double Tap with Two Fingers
Double tap the touchscreen on camera view with two fingers to switch between the front and
touchscreen.

Storing Photos and Videos

The footage shot on Osmo Action can be stored on a microSD card (not included). A UHS-I Speed
Grade 3 rating microSD card is required due to the fast read and write speeds necessary for high-
resolution video data. Refer to the recommended microSD card list at www.dji.com/osmo-action for
more information.
Insert the microSD card into the microSD card slot as shown.

Status LED Descriptions

There are two status LEDs on Osmo Action, which indicate the same information. The status LEDs can
be turned on and o.
10
© 2019 DJI OSMO All Rights Reserved.
OSMO ACTION User Manual
01:42
04:37
01:42
OSMO ACTION
Blinking Patterns Descriptions
Solid green Ready to use.
O
Solid red
No microSD card detected or insucient microSD card storage. Osmo
Action is powered on while charging.
A USB is connected to Osmo Action or Osmo Action is powered off while charging.
High-temperature warning, low battery level warning, battery
Blinks red twice quickly
abnormality, or microSD card abnormality (no microSD card detected, microSD card storage is full, or microSD card error.)
Blinks red and green alternatively Updating rmware.
Blinks red for one second
Battery inserted, USB-C port connected, or Osmo Action is powering on or o.
Temporarily o While taking photo.
Blinks once every second (Countdown: 10 s – 4 s)
Blinks twice every second (Countdown: 3 s – 2 s)
Osmo Action is counting down to take a photo.
Solid red (Countdown: 1 s – 0 s)
Temporarily red (After countdown)
Blinks once every second Osmo Action is recording a video or taking a timed photo.

DJI Mimo App

Camera View: tap to connect to Osmo Action. Once connected, DJI Mimo enters camera view.
Home: tap to return to Home.
Edit: tap to edit photos or video from Osmo Action or import and edit from a mobile device.
Profile: register or log in to a DJI account. View works and settings, check likes and followers, send
messages to other users, and connect with the DJI Store.
Academy: tap to watch tutorials and manuals.
00:16
OSMO POCKET
DJI MIMO
Learn how to take easy Timelapse shots with Osmo Pocket
#Tutorial
Quickly master 3X3 panorama shots
#Pano Mode
Learn to use Story Mode and create fun videos
#OSMO POCKET
Learn how to take easy My Story shots
#OSMO POCKET
© 2019 DJI OSMO All Rights Reserved.
11
OSMO ACTION User Manual
PHOTO
TIMELAPSE
PANO
VIDEO
60
2.7K
Camera View
1 2 3 4
25:56
AUTO
5
11
1/8000 6400 +3.0
8910
1. Home
: tap to return to home page.
2. Wi-Fi
: displays Wi-Fi connection.
3. Battery Level
: displays current battery level of Osmo Action.
4. microSD Card Information
25:56
: according to the shooting mode, displays either the remaining number of photos that can be
taken or the duration of video that can be recorded.
5. AE Lock
: tap to enable or disable AE lock after enabling spot metering.
6. Shutter/Record Button
: tap to take a photo or to start or stop recording video.
7. Shooting Mode
Scroll to select the shooting mode. Choose between Timelapse, Slow Motion, HDR Video, Video,
and Photo.
8. Playback
: tap to preview photos and videos.
9. Shooting Mode Settings
ISO
1/8000 6400
+3.0
: display the shooting mode settings.
10. Settings
6
7
12
© 2019 DJI OSMO All Rights Reserved.
OSMO ACTION User Manual
Shooting Mode Settings
Timelapse
Slow Motion Video Format, White Balance, ISO Max, Color, Grid, Overexposure Alert, and Histogram
HDR Video Dewarp, Video Format, White Balance, Grid, Overexposure Alert, and Histogram
Video
Photo
Dewarp, Format, White Balance, ISO Max, Anti-Flicker, Grid, Overexposure Alert, and
Histogram
Dewarp, RockSteady*, Video Format, White Balance, ISO Max, Color, Anti-Flicker, Grid, Overexposure Alert, and Histogram
Dewarp, Photo Format, Photo Ratio, Metering, White Balance, ISO Max, Color, Anti­Flicker, Grid, Overexposure Alert, and Histogram
* RockSteady requires a rmware update.
General Settings: Device Management, SD Card Capacity, Format SD Card, Screen Flip, Noise
Reduction, Voice Control, Voice Language, Command List, Wi-Fi Settings, Switch Wi-Fi Frequency,
Firmware Version, and About.
11. Camera Settings
Shooting Mode Settings
Timelapse Resolution and FPS, Video Frame Rate, ISO, Shutter, and EV
Slow Motion Resolution and FPS, Speed, ISO, Shutter, and EV
HDR Video Resolution and FPS and Video Frame Rate
Video Resolution and FPS, Video Frame Rate, ISO, Shutter, and EV
Photo AEB, Single Shot, Burst, Timed, ISO, Shutter, and EV

Updating Firmware

The rmware of Osmo Action can be updated by using DJI Mimo or a microSD card.
Using DJI Mimo
An alert appears in DJI Mimo when new rmware is available. Follow the instructions to update the
rmware.
Using a microSD Card
Download the latest rmware on the ocial DJI website to the root directory of a microSD card.
1. Insert the microSD card and power on Osmo Action. The update starts automatically once a new
rmware is detected.
2. During the update, the status LED indicators blink red and green alternatively and a reminder will
remain on the screen. No operation is required.
3. Osmo Action restarts automatically once the update is complete.
A microSD card is required to update rmware.
Make sure the battery level of Osmo Action is at least 15% before updating rmware.
13
© 2019 DJI OSMO All Rights Reserved.
OSMO ACTION User Manual

Maintenance

Underwater Usage Notes

1. Make sure the battery and battery compartment are dry and clean before inserting the battery. Otherwise, it may aect the battery contacts and waterproong. Make sure the battery is properly inserted during use. Note that if the battery is properly inserted, the orange marks on either side of
the battery cannot be seen.
2. Make sure the USB-C cover is clean and closed before using. Otherwise, it will aect the device’s waterproong ability.
3. Make sure the lens lter cap is in good condition and undamaged. If there is any damage, replace it immediately. Make sure the lens lter cap and lens are dry and clean. Sharp or hard objects may damage the lens and aect the waterproong. Make sure the lens lter cap is properly tightened
during use.
4. Osmo Action is not waterproof unless the battery is properly inserted, the USB-C cover is closed, and the lens lter cap is attached.
5. Osmo Action can be used underwater at depths of up to 11 m. When using a waterproof case, the maximum depth underwater is 60 m.
6. Avoid jumping into water at high speed with Osmo Action. Otherwise, the impact may result in water leakage. Make sure Osmo Action is waterproof before jumping into the water.
7. DO NOT use Osmo Action in a hot spring.
8. Clean Osmo Action with water after using underwater. Allow it to dry naturally before using again.

Clean Notes

1. Clean the lens lter cap with water, a lens cleaning pen, a lens air blower, or a lens cleaning cloth.
2. Clean the lens with a lens cleaning pen, a lens air blower, or a lens cleaning cloth.
3. Clean the holes on the camera and ventilation area with water if there is any object inside before
usage. DO NOT poke the holes. Contact DJI support if they cannot be cleaned.
4. Clean the battery and battery compartment with a clean, dry cloth.
5. All the holes on Osmo Action have built-in waterproof material. DO NOT remove the waterproof
material or poke the holes. Otherwise, Osmo Action will no longer be waterproof.
14
© 2019 DJI OSMO All Rights Reserved.
OSMO ACTION User Manual
Specications
Model AC001
Wi-Fi
Operating Frequency
Transmitter Power (EIRP)
Protocol 802.11a/b/g/n/ac
Bluetooth
Operating Frequency 2.400-2.4835 GHz
Transmitter Power (EIRP) 4 dBm
Protocol BLE 4.2
Battery
Capacity 1300 mAh
Voltage 3.85 V
Charging Limit Voltage 4.4 V
Type LiPo 1S
Energy 5.005 Wh
* 5.8 GHz is not supported in some regions. Observe local laws and regulations.
2.400-2.4835 GHz, 5.725-5.850 GHz* (FCC/CE/SRRC)
2.400-2.4835 GHz (MIC)
2.4 GHz: ≤19 dBm (FCC/CE/SRRC/MIC)
5.8 GHz: ≤13 dBm (CE), ≤19 dBm (FCC/SRRC)

After-Sales Information

Visit https://www.dji.com/support to learn more about after-sales service policies, repair services, and
support.
For online support, please scan this code
with Facebook Messenger
© 2019 DJI OSMO All Rights Reserved.
15
This content is subject to change.
Download the latest version from
www.dji.com/osmo-action
OSMO
is a trademark of DJI.
Copyright © 2019 DJI OSMO All Rights Reserved.
Loading...