Dji Battery (2 PIN) to DC Power Cable User Guide 1.0

Page 1
DJI Battery (2 PIN) to DC Power Cable
User Guide
2016.04
V1.0
Page 2
Disclaimer and Warning
Congratulations on purchasing your new DJI product. The
information in this document affects your safety and your
legal rights and responsibilities. Read this entire document
read and follow instructions and warnings in this document
may result in serious injury to yourself or others, damage to
your DJI product, or damage to other objects in the vicinity.
This document and all other collateral documents are subject
information, visit http://www.dji.com and click on the product
page for this product.
By using this product, you hereby signify that you have read
this disclaimer and warning carefully and that you understand
and agree to abide by the terms and conditions herein. You
agree that you are solely responsible for your own conduct
while using this product, and for any consequences thereof.
You agree to use this product only for purposes that are
proper and in accordance with all applicable laws, rules, and
regulations, and all terms, precautions, practices, policies
and guidelines DJI has made and may make available.
1
Page 3
DJI accepts no liability for damage, injury or any legal
responsibility incurred directly or indirectly from the use of
this product. The user shall observe safe and lawful practices
including, but not limited to, those set forth in this document.
Introduction
The DJI Battery (2 PIN) to DC Power Cable is used to
connect a DJI device with a DC port and one of the following
DJI Intelligent Batteries as a power supply for the device.
A
A
B
B
Supported DJI Intelligent Battery Models
PH3-4480mAh-15.2V (Phantom 3 Intelligent Flight Battery)
TB47/TB48 (Inspire 1 Intelligent Flight Battery)
TB47D/TB48D (Matrice 100 Intelligent Flight Battery)
844297-4350mAh-15.2V (Ronin Intelligent Battery)
824380-3400mAh-14.8V (Ronin Intelligent Battery)
423496-1580mAh-14.4V (Ronin-M Intelligent Battery)
2
Page 4
DJI Support:
www.dji.com/support
Manufactured by 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China
The content in this document is subject to change.
Download the latest version from
www.dji.com/product/osmo
If you have any questions about this document, please contact DJI by sending a message to
2016 DJI. All Rights Reserved.
©
DocSupport@dji.com.
Loading...