PAD
TECHNOLOGY FOR THE MULTITOUCH GENERATION
DISPLAX PAD
USER GUIDE
MKT.246.1 | DISPLAXTM PAD USER GUIDE 2
PACKING LIST ........................................................................................................................ 3
GENERAL INFORMATION ................................................................................................. 4
HANDLING INSTRUCTIONS ................................................................................................................... 4
TOOLS REQUIRED ..................................................................................................................................... 4
DOWNLOAD USER GUIDE AND DRIVERS ....................................................................................... 4
OTHER INFORMATION ............................................................................................................................. 5
PRODUCT DESCRIPTION ................................................................................................. 6
DISASSEMBLING & ASSEMBLING ................................................................................ 9
HOW TO OPEN PAD .................................................................................................................................. 9
HOW TO REMOVE OR ASSEMBLE PC .............................................................................................. 9
HOW TO ACCESS THE PCB .................................................................................................................. 9
HOW TO REMOVE OR CHANGE LCD ..............................................................................................11
SETTING UP DISPLAX PAD ........................................................................................... 12
SKIN MULTITOUCH CONFIGURATION .................................................................... 13
CARE & HANDLING .......................................................................................................... 14
SUPPORT .............................................................................................................................. 15
WARRANTY .......................................................................................................................... 16
MKT.246.1 | DISPLAXTM PAD USER GUIDE 3
PACKING LIST
This DISPLAX Pad shipment contains the following equipments/components:
Pad 1 unit
Remote control 1 unit
3D glasses* - 1 unit
* When technology available in LCD shipped
01
MKT.246.1 | DISPLAXTM PAD USER GUIDE 4
GENERAL INFORMATION
HANDLING INSTRUCTIONS
Due to the product weight, carrying and assembling DISPLAX Pad should be made by 2
persons.
Never place DISPLAX Pad with the glass facing down. Always make sure the unit is placed in
a surface clean and free of debris to avoid scratching or damaging.
Always make sure the back is properly attached to the trim before moving your Pad.
TOOLS REQUIRED
DISPLAX Pad is shipped assembled and ready to use. If you need to do any maintenance or
exchange PC or LCD, you will need the following tools:
Unbrako / hex key (not included), size 6 and size 2.
DOWNLOAD USER GUIDE AND DRIVERS
USER GUIDE
Make sure you download and read the DISPLAX Pad User Guide before assembling your
unit:
http://www.displax.com/downloads/UserGuides/DisplaxPad.php
02
MKT.246.1 | DISPLAXTM PAD USER GUIDE 5
DRIVER
DISPLAX Pad uses DISPLAX Skin Multitouch as the touch detection technology. To
download the most updated drivers
unit is an Intel NUC 64 bits with Windows 8 Pro.
If you are not using the default PC unit make sure to check the architecture of the processor
and select the correct driver.
http:// support.displax.com/downloads.php
SKIN MULTITOUCH USER GUIDE
The User Guide can be downloaded to answer any questions regarding the touch
technology.
http://www.displax.com/downloads/UserGuides/DisplaxSkinMultitouch.php
OTHER INFORMATION
LCD manufacturers require that LCDs used in portrait mode be mounted like this. Non
compliance may result in lost of warranty
The serial number is placed in the back.
MKT.246.1 | DISPLAXTM PAD USER GUIDE 6
PRODUCT DESCRIPTION
A. Structure
a. Glass (with Skin Multitouch foil laminated)
b. Stainless steel trim
c. Speakers**
d. Cables opening
B. LCD
a. HDMI cable
b. Power cable
c. Remote control
d. 3D glasses*
C. Intel NUC
a. Power cable
D. Printed Circuit Board (Skin Multitouch PCB controller)
a. USB cable
E. Metallic beam (2)
F. Carbon steel back
a. PCB removable cover
b. LCD removable cover
G. USB extension cable
* When technology available in LCD shipped
-in on LCD
03
Loading...