Disney Pixar Cars Luigi's Casa Della Tires Playset, DHJ-37 Instructions Manual
INSTRUCTIONS
LUIGI’S CASA DELLA TIRES
LUIGI’S CASA DELLA TIRES
Please keep these instructions for future reference as they contain important information.
CONTENTS
BOTTOM VIEW
If plastic tab is still attached to play set,
pull it out and dispose of it before play.
INSTRUCTIONS
Colors and decorations may vary from those shown.
WARNING:
CHOKING HAZARD
Not for children under 3 years.
– Small parts.
Includes 2 AG13 (LR44) button cell batteries for the
vehicle and 3 C (R14) size Carbon Zinc batteries for
the play set. Dispose of batteries safely.
A
ADULT
COLLECTOR
B
C
D
1
1
REMOVABLE
ROOF.
3
ASSEMBLY
4
2
OPTIONAL CONNECTOR: CONNECT TO
OTHER STORY SETS (SOLD SEPARATELY,
SUBJECT TO AVAILABILITY).
A
5
B
C
D
14
INSTRUCTIONS
2
• Batteries included are for demonstration purposes only.
• Replace batteries when lights become dim.
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Remove batteries and dispose of them safely.
• For the vehicle, install 2 new AG13 (LR44) button cell batteries in the orientation (+/-) shown.
• For the play set, install 3 new C size (LR14) batteries in the orientation (+/-) shown.
• Replace battery cover and tighten screw(s).
• For best performance, use only alkaline batteries.
• If vehicle malfunctions, remove batteries and re-install after 5 seconds. This should reset your vehicle and let you
resume normal operation.
• If play set malfunctions, turn power OFF for a few seconds, then ON again. This should reset your play set and let
you resume normal operation.
BATTERY REPLACEMENT
3
The play set also works with the following AC/DC power adapters (sold separately, subject to
availability):
• RCA AC/DC adapter model # AH56R (Walmart.com)
• Hosa AC/DC adapter model # ACD477 (Amazon.com)
3
SLIDING CURTAINS CAR LIFT
AC/DC POWER ADAPTER SOCKET
POWER SWITCH
FEATURES
NOTE: The battery power will be suspended when an adapter is used with the play set.
To resume using batteries, disconnect the adapter from the set.
ba
LIGHT SENSOR
FUNCTION BUTTON
AC/DC ADAPTER – NORMAL MODE
When an AC/DC adapter is used in NORMAL MODE, the light shows are longer. Everything else
is the same as using batteries. Please see the instructions for “BATTERIES – NORMAL MODE” .
In this mode, during the light show, press and hold the button for over 2 seconds to play the
show continuously!
= NORMAL MODE
= OFF
= LIGHT SENSOR MODE
Press and release for car lights.
Lights turn off automatically.
AC/DC ADAPTER – LIGHT SENSOR MODE
When an AC/DC adapter is used in LIGHT SENSOR MODE, the light show will stay on as long as
the room lights stay off. Everything else is the same as using batteries. Please see the
instructions for “BATTERIES – LIGHT SENSOR MODE”.
Loading...