Disney DPH8010-P User Manual

Lift to answer or make a call

Plug coiled handset cord into this jack

The Receiving Call Light will

flash when receiving a call

Handset Cord

Press to dial a telephone number

Press to mute the handset so the caller

cannot hear you; release to un-mute.

Press to redial the last dialed telephone number

Press the FLASH button to hang up the phone

without having to return it to the base
Press to insert a three second pause

Slide the Receiver VOLUME switch

to the HI (High) or LO (Low)

position as desired.

Slide to Ton e or Pulse to

match the service provided

on your telephone line

Connect the cord from the

telephone wall jack

Insert three AAA size batteries for

ringing with Disney sound when

receiving a call

Slide to turn the ringer on or off

Speaker

QUICK REFERENCE

1

QUICK REFERENCE (CONTINUED)

1. Set the RINGER switch to the ON position to have the ringer sound
when receiving a phone call.

2. Set the Tone/Pulse switch to Tone or Pulse to match the service
provided on your telephone line.

3. Connect the coiled handset cord to the base.

4. Connect the straight cord to the telephone base jack and telephone
wall jack.

5. When the phone rings, lift the handset and speak into the
mouthpiece. Hang up when call is completed.

6. Lift the handset and listen for a dial tone. Press the key buttons (0-9)
for the specified number you wish to call.

7. Slide the Receiver VOLUME switch to the HI (High) or NOR (Normal)
position as desired.

8. Press the REDIAL button to automatically redial the last number
dialed.

9. Press the FLASH button to hang up the phone without having to
return it to the base. This is useful for using the phone with the Call
Waiting feature.

10. Press and hold the MUTE button and you will be able to hear the
person on the other end of the telephone, but they cannot hear you.
Release the MUTE button to restore normal sound.

11. Press the PAUSE button to insert a three second pause. This is
useful in some cases, such as a PBX or long distance service when a
pause may be needed in the dialing sequence

2

PACKAGE LIST

The package should include the following items:

1. Base Unit

2. Handset with Handset Cord

3. Telephone Line Cord

4. User's Guide

IMPORTANT SAFETY INSTRUCTIONS

Warning: Changes or modifications to this unit not expressly approved by

the party responsible for compliance could void the user’s authority to
operate the equipment.

If your local telephone exchange only accepts Pulse dialing, you may
have to switch the Tone/Pulse switch to Tone to access certain services
that require Tone signalling (such as home banking). After the initial line is
connected to the number you are calling, switch the Tone/Pulse switch to
Tone to access Tone signalling. When you have completed your call,
please switch the Tone/Pulse switch back to Pulse.

3