Model #’s FD50100
FD50105
FD50110
CARPET
WASHER
MANUAL
#961151127 / ID109742 / R0
©2014 All rights reserved
HI. WELCOME.
PRODUCT
REGISTRATION
For quick reference, please record your product information below.
Model #:
Mfg. Code:
(Mfg. code located on the back or bottom of product)
Warranty Registration
Be sure to register your product online at www.DirtDevil.com or
call 1-800-321-1134 to register by phone.
Hint: Attach your sales receipt to this Owner’s manual. Verication of date of purchase may
be required for warranty service of your Dirt Devil® product.
Congrats on purchasing your new Dirt Devil
®
®
Carpet
Washer. Inside, you’ll find everything you want to
know from the quick start guide to how to.
So what are you waiting for? LET’S GO.
™
This product uses the following parts:
BELT STYLE 30
PRE-MOTOR FILTER
F92
Find GENUINE Replacement Parts at www.dirtdevil.com
TABLE OF
CONTENTS
Quick Start Assembly 6
Preparing the Carpet 10
How to
Remove and Replace Clean
Water Solution Tank
12
Empty the Dirty Water Tank
14
Place Dirty Water
Tank in Base of Cleaner 15
Remove the Brushroll 16
Replace the Belt 17
Trouble Shooting 18
Limited Warranty 19
IMPORTANT: READ CAREFULLY BEFORE ASSEMBLY AND USE.
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. IF
USED COMMERCIALLY WARRANTY IS VOID.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
• Fully assemble before operating.
• Operate cleaner only at voltage specied on data plate on bottom of cleaner.
• Do not leave appliance when plugged in. Unplug from outlet when not in use and before
cleaning or servicing.
• Use indoors only.
• Do not immerse. Use only on carpet moistened by cleaning process.
• Use only DIRT DEVIL® cleaning products intended for use with this machine.
(See the “Cleaning Products” section of this manual.)
• Do not use a ammable or combustible liquid to clean a oor.
• Do not allow to be used as a toy. Not intended for use by children age 12 and under.
Close supervision is necessary when used near children. To avoid injury or damage, keep
children away from product, and do not allow children to place ngers or other objects into
any openings.
• Use only as described in this manual. Use only manufacturer’s recommended attachments
and products.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to
continuing use.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord
around sharp edges or corners. Do not place product on cord. Do not run appliance over
cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of
dust, lint, hair, and anything that may reduce air ow.
• Keep hair, loose clothing, ngers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent
the cleaner from falling, always place cleaner at bottom of stairs or on oor. Do not place
cleaner on stairs or furniture, as it may result in injury or damage.
• Do not use to pick up ammable or combustible materials, such as gasoline, or ne wood
sandings, or use in areas where they may be present.
• Connect to a properly grounded outlet only. See Grounding Instructions.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without tanks or lters in place.
• Do not clean over oor electrical outlets.
• WARNING: This product contains chemicals known to the State of California to cause
cancer, birth defects or reproductive harm.
WASH HANDS AFTER USING.
WARNING
CAUTION: TO REDUCE THE RISK OF DAMAGE:
• Avoid picking up hard, sharp objects with this product, as they may cause damage.
• Store in a dry place. Do not expose machine to freezing temperatures.
• Do not use sharp objects to clean out hose as they can cause damage.
• To assist in reducing drying time, be certain the area is well ventilated when using
detergents and other cleaners with this machine.
• To help prevent matting and resoiling, avoid contact with carpets until they are dry. Keep
children and pets away from carpets until they are completely dry.
• Do not store extractor with solution in tanks.
• With brushes on, do not allow cleaner to sit in one location with brushes on for extended
periods of time, as damage to oor can result.
• DO NOT USE THIS EXTRACTOR ON HARD FLOORS. USING THIS
MACHINE ON HARD FLOORS MAY SCRATCH OR DAMAGE YOUR FLOOR.
SAVE THESE INSTRUCTIONS
WARNING
Improper connection of the equipment-grounding conductor can result in the risk of
electric shock. Check with a qualified electrician or service person if you are in doubt
as to whether the outlet is properly grounded. Do not modify the plug provided with
the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified
electrician. This appliance is for use on a nominal 120-volt circuit and has a grounding
plug that looks like the plug (A) illustrated in Fig. 1. A temporary adapter (D) may be
used to connect this plug to a 2-pole receptacle (E) if a properly grounded outlet is not
available (Fig. 2). The temporary adapter should be used only until a properly grounded
outlet (B) can be installed by a qualified electrician (Fig. 1). The green colored rigid
ear, lug, or the like (F) extending from the adapter must be connected to a permanent
ground (G) such as a properly grounded outlet box cover (Fig. 2). Whenever the
adapter is used, it must be held in place by a metal screw. NOTE: In Canada, the use
of a temporary adapter is not permitted by the Canadian Electrical Code.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This appliance
is equipped with a cord having an equipment-grounding conductor (C) and grounding plug (A).
The plug must be inserted into an appropriate outlet (B) that is properly installed and grounded
in accordance with all local codes and ordinances.
D
F
E
G
D
GROUNDING
OUTLET BOX
B
A
C
2
1
POP THE BACK PANEL
INTO THE BASE.
SCREW IT
TOGETHER.
NEED HELP?
Go to dirtdevil.com/support or contact our Customer Service
Department at (800) 321-1134 8:00 a.m. - 7:00 p.m. EST Mon. - Fri.
or Sat. 10:00 a.m. - 6:00 p.m. EST.
CHECK FOR COLOR FASTNESS
Before cleaning carpet/upholstery, test for color fastness. Dampen a
white cloth with solution. Test a small area in a closet or under a cushion.
Gently rub the cloth over the area. Check each color for color bleeding. If
the cloth remains clean, it should be safe to clean the carpet/upholstery.
6
THEN INSERT THE
HANDLE INTO THE
BODY. INSERT
THE SCREW AND
TIGHTEN.
WARNING CAUTION
To reduce the risk of fire, electric shock, or
injury: ensure the power cord is out of the
way before attaching the upper handle.
To reduce the risk of damage: Do not use this
extractor on hard floors. Using this machine on
hard floors may scratch or damage your floors.
FILL WATER
SOLUTION TANK.
(SEE PAGE 12)
TIP THE CLEAN
WATER SOLUTION
TANK IN LIKE THIS.
IT WILL CLICK.
7
QUICK START
PLUG UNIT IN. STEP
ON THE HANDLE
RELEASE PEDAL AND
PULL BACK ON THE
UPPER HANDLE. THEN
STEP ON THE POWER
BUTTON TO TURN ON.
PULL TRIGGER TO
SPRAY SOLUTION WHILE
MOVING FORWARD.
THEN SLOWLY RELEASE
THE TRIGGER AND PULL
YOUR CARPET WASHER
BACK TO REMOVE DIRTY
WATER AND SOLUTION.
HANDLE
RELEASE
PEDAL
POWE R
8
EMPTY CLEAN WATER
SOLUTION TANK AND
REFILL WITH CLEAN
WATER. REPEAT STEP
6 WITH JUST CLEAN
WATER FOR RINSING.
EMPTY DIRTY WATER
TANK WHEN FULL.
YOUR
CARPET
IS FRESH
AND CLEAN!
NEED HELP?
Go to dirtdevil.com/support or
contact our Customer Service
Department at (800) 321-1134
8:00 a.m. - 7:00 p.m. EST Mon. - Fri.
or Sat. 10:00 a.m. - 6:00 p.m. EST.
Pick up the conversation on...
Twitter@DirtDevil
Facebook.com/DirtDevil
CAUTION
Never leave unit unattended with power on. Turn OFF when emptying and filling tank. Do NOT oversaturate the carpet.
If the sound of the motor changes to a high pitch, this indicates the dirty water tank is full and must be emptied.
9
QUICK START
HELPFUL HINTS FOR CLEANING CARPET
1. Vacuum carpet thoroughly
with a Dirt Devil® cleaner.
• Do not oversaturate your
carpet with cleaning
solution.
• Stay off of the carpet
until it is dry.
2. Place plastic or foil under
and around the legs of
furniture until the carpet
has completely dried.
• Additional applications
may be needed for
heavily soiled areas.
• Be sure to rinse carpet
thoroughly with water.
• Wipe cleaning solution
from wood to prevent
damage.
• After carpet is dry,
vacuum with a
Dirt Devil
®
cleaner.
• Plan your route so you
don’t walk over previously
cleaned areas.
10
AFTER CLEANING
• Allow carpet to dry completely. Try not to walk on the
carpet until it is dry.
• If you need to walk on the carpet, place white towels
on the areas you want to walk.
• If the carpet is not dry and the furniture must be placed
back in the room, use plastic or foil under the furniture
to prevent staining the carpet.
• Thoroughly clean the dirty water tank with hot tap water.
See page 14.
CAUTION WARNING
Do not use the carpet cleaner as a
dry vacuum.
Do not store the carpet cleaner in garage
or area where unit could freeze.
NOTE: Do not transport the carpet cleaner with either the Clean Water Solution Tank
or Dirty Water Tank full.
11
PREPARING THE CARPET
1. Press the Clean Water
Tank latch.
2. Tip it out like this.
REMOVE AND REPLACE CLEAN WATER
SOLUTION TANK
12
3. Unscrew measuring
cap from the back.
4. For a full size room,
place 5 capfuls of Dirt
Devil® solution into Clean
Water Solution Tank .
5. Fill remaining Clean
Water Solution Tank
with hot tap water.
Tightly screw cap
back on.
6. Place the Clean Water
Solution Tank back in
bottom first. It will click.
WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only Dirt
Devil brand cleaning fluid intended for use with this appliance. See Cleaning Fluid Section for
recommended solutions.
HOW TO
13
EMPTY THE DIRTY WATER TANK
1. Pull the latch to release.
2. Hold the handle and pull
tank up and out.
3. Pull lid out and
empty like this.
4. Rinse the tank and
filter with hot tap water.
Wipe and let dry before
storing to prevent
mildew. Replace the
dirty water tank lid.
14
PLACE DIRTY WATER TANK IN
BASE OF CLEANER
1. Place carpet cleaner
on a flat surface.
2. Hook the front of the
tank into the base.
Make sure the tabs on
the bottom of the tank
are latched.
3. The nozzle should be
flush with the base. If
it’s not, this will result
in poor water pickup.
4. Now place the rear
of the tank into the
base of the cleaner.
Push handle down
until it clicks.
IMPORTANT
You will hear a noticeable change in the pitch of
the cleaner. This indicates a need to empty the
dirty water tank.
WARNING
To reduce risk of personal injury unplug cleaner before servicing. Do
not use any chemicals when cleaning.
HOW TO
15
REMOVE THE BRUSHROLL
Note: Be sure to switch off the unit, unplug & remove the
clean & dirty water tanks before servicing.
1. Flip your carpet washer
on its side like this.
2. Use a Phillips screwdriver
to remove the 3 screws
here. Now pull cover off.
4. Keeping tension on
the belt, use two hands
to lift the brushroll up
and out.
4. Replace belt cover and
secure with the three
screws.
CAUTION
To reduce the risk of injury from moving
parts, unplug cleaner before servicing.
Rotate brushroll manually to make sure
belt is not twisted or pinched.
For Belt Style 30 replacements, please call 1-800-321-1134 or visit our website at
www.DirtDevil.com to locate a dealer nearest you.
16
REPLACE THE BELT
1. Take off cover (Refer to
page 16). Remove and
toss the old belt out.
2. Place the new belt on
the motorshaft, then slip
it in the area without
brushroll bristles.
4. Replace belt cover and
secure with the three
screws.
A
Any other servicing should be done by an authorized service representative. If appliance is not
working as it should, has been dropped, damaged, left outdoors, or dropped into water,
take it to a service center prior to continuing use.
3. With belt in place, pull and
slide brushroll into the
nozzle, making sure that
the brushroll ends are in
the correct orientation (A).
HOW TO
17
WARNING TO REDUCE THE RISK OF PERSONAL
INJURY - UNPLUG BEFORE CLEANING OR SERVICING.
If a minor problem occurs, it usually can be solved quite easily when the cause is found
by using the checklist below. Any other servicing should be done by an authorized service
representative. If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, take it to a service center prior to continuing use.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Cleaner won’t
run
1. Power cord not firmly plugged
into outlet.
1. Plug unit in firmly.
2. Blown fuse or tripped breaker.
2. Check fuse or breaker in home. Replace
fuse/reset breaker in home.
3. Needs service.
3. Take to service center. To find nearest
location, visit our website at www.DirtDevil.com
or call 1-800-321-1134.
Cleaner won’t
pick-up or low
suction
1. Dirty Water Tank Lid not installed. 1. Insert Dirty Water Tank Lid - Pg. 14.
2. Dirty Water Tank is not installed
correctly.
2. Review Placing Dirty Water Tank in base of
cleaner - Pg. 15.
3. Dirty Water Tank is full. 3. Empty Dirty Water Tank - Pg. 14.
4. Dirty water passage clogged. 4. Clean Dirty Water Tank - Pg. 14.
5. Foam filter is dirty. 5. Clean filter. Review Emptying & Cleaning the
Dirty Water Tank - Pg. 14.
Water
escaping from
Cleaner
1. Dirty Water Tank is full. 1. Emptying Dirty Water Tank - Pg. 14.
2. Dirty Water tank is not installed
correctly.
2. Review Placing Dirty Water Tank in base of
cleaner - Pg. 15.
3. Clean Water Solution Tank not
installed properly.
3. Review Clean Water Solution Tank
Installation - Pg. 12.
Cleaner won’t
dispense
1. Clean Water Solution Tank not
installed properly.
1. Review Clean Water Solution Tank
Installation - Pg. 12.
2. Needs service. 2. Take to service center. To find nearest
location, visit our website at www.DirtDevil.com
or call 1-800-321-1134.
Motor noise
becomes
high-pitched
1. The float in the Dirty Water Tank
has been activated.
1. Review Emptying & Cleaning the Dirty Water
Tank - Pg. 14.
Dirt Devil
®
Cleaning Product Guide
Product Name
Dirt Devil
®
Quick & Light
Deep Clean
Advanced
64 oz.
Deep Clean
Pet
64 oz.
WARNING TO REDUCE THE RISK OF FIRE AND ELECTRICAL SHOCK DUE
TO INTERNAL COMPONENT DAMAGE, USE ONLY DIRT DEVIL® BRAND DETERGENT PRODUCTS
INTENDED FOR USE WITH THE APPLIANCE.
18
LIMITED
WARRANTY
WHAT THIS WARRANTY COVERS
When used and maintained in normal household use and in accordance with the Owner’s Manual, your
Dirt Devil
®
product is warranted against original defects in material and workmanship. During the
Warranty Period, We will provide labor and parts, at no cost to you, to correct any such defect in
products purchased in the United States, U.S. Military Exchanges and Canada.
HOW TO MAKE A WARRANTY CLAIM
If this product is not as warranted, take or send the product to a Dirt Devil® Authorized Warranty
Service Dealer along with proof of purchase. For an automated referral to authorized service outlets in
the U.S.A., phone: 1-800-321-1134 OR visit Dirt Devil
®
online at www.DirtDevil.com. For additional
assistance or information concerning this Warranty or the availability of warranty service outlets, phone
the Dirt Devil
®
Consumer Response Center, Phone 1-800-321-1134, Mon-Fri 8am-7pm EST.
WHAT THIS WARRANTY DOES NOT COVER
This Warranty does not cover: use of the product in a commercial operation (such as maid, janitorial
and equipment rental services), brushroll, belt, bags, filters, improper maintenance of the product,
damage due to misuse, acts of God, nature, vandalism or other acts beyond the control of Royal
Appliance Mfg. Co. (“Royal”, “we”), owner’s acts or omissions, use outside the country in which the
product was initially purchased and resales of the product by the original owner. This warranty does
not cover pick up, delivery, transportation or house calls.
This warranty does not apply to products purchased outside the United States, including its territories
and possessions, outside a U.S. Military Exchange and outside of Canada. This warranty does not cover
products purchased from a party that is not an authorized retailer, dealer, or distributor of Royal
products.
OTHER IMPORTANT TERMS
This Warranty is not transferable and may not be assigned. This Warranty shall be governed and
construed under the laws of the state of Ohio. The Warranty Period will not be extended by any
replacement or repair performed under this Warranty.
THIS WARRANTY IS THE EXCLUSIVE WARRANTY AND REMEDY PROVIDED BY ROYAL. ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT WILL ROYAL BE LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR
NATURE TO OWNER OR ANY PARTY CLAIMING THROUGH OWNER, WHETHER BASED IN
CONTRACT, NEGLIGENCE, TORT OR STRICT PRODUCTS LIABILITY OR ARISING FROM ANY CAUSE
WHATSOEVER. Some states do not allow the exclusion of consequential damages, so the above
exclusion may not apply to you. This warranty gives you specific rights; you may also have others that
vary from state to state.
19
Call our Customer Service
Department
at
(800) 321-1134
8:00 a.m. - 7:00 p.m. EST Mon. - Fri.
or Sat. 10:00 a.m. - 6:00 p.m. EST.
www.dirtdevil.com
Find GENUINE
Replacement Parts at
www.dirtdevil.com
This product uses the following parts:
BELT STYLE
30
PRE-MOTOR FILTER F92
OUR VACS SPEAK
VOLUMES
Pick Up the Conversation On…
Twitter@DirtDevil
Facebookcom/DirtDevil
Loading...