Diodes ZXTD09N50DE6 User Manual
A
f
Product Line o
50V DUAL NPN LOW SATURATION SWITCHING TRANSISTOR IN SOT26
Features
Mechanical Data
Diodes Incorporated
ZXTD09N50DE6
• BV
• I
• High Gain
• R
• Low Saturation Voltage V
• Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
• PPAP capable (Note 4)
> 50V
CEO
= 1A High Continuous Current
C
= 160mΩ for Low Equivalent On Resistance
SAT
< -270mV @ 1A
CE(sat)
SOT26
C2
B2
E2
Top View
• Case: SOT26
• Case Material: Molded Plastic, “Green” Molding Compound
• UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin Plated Leads, Solderable per
• Weight: 0.015 grams (approximate)
Applications
• LCD Backlighting Inverter Circuits
• Boost Functions in DC-DC Converters
B1
Device Symbol
MIL-STD-202, Method 208
C1
C1
E1
C2
E1
B1
E2
B2
Top View
Pin-Out
Ordering Information (Notes 4 & 5)
Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel
ZXTD09N50DE6TA AEC-Q101 D619 7 8 3,000
ZTD09N50DE6QTA Automotive D619 7 8 3,000
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/ for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green" and Lead-Free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified.
5. For packaging details, go to our website at http://www.diodes.com
Marking Information
ZXTD09N50DE6
Document number DS33650 Rev. 5 - 2
D619
D619 = Product Type Marking Code
1 of 7
www.diodes.com
January 2013
© Diodes Incorporated
A
f
θ
Maximum Ratings – Q1 & Q2 Common (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Continuous Collector Current
Peak Pulse Current
Base current
V
CBO
V
CEO
V
EBO
I
C
I
CM
I
B
Thermal Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
(Notes 6 & 10)
(Notes 7 & 10)
Power Dissipation
Linear Derating Factor
(Notes 7 & 11)
P
D
(Notes 8 & 10)
(Notes 9 & 10)
(Notes 6 & 10)
(Notes 7 & 10) 139
Thermal Resistance, Junction to Ambient
(Notes 7 & 11) 113
(Notes 8 & 10) 113
R
JA
θ
(Notes 9 & 10) 73
Thermal Resistance, Junction to Lead (Note 12)
Operating and Storage Temperature Range
Notes: 6. For a device surface mounted on 15mm x 15mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions; the device is measured
when operating in a steady-state condition.
7. Same as note (6), except the device is surface mounted on 25mm x 25mm 1oz copper.
8. Same as note (6), except the device is surface mounted on 50mm x 50mm 2oz copper.
9. Same as note (8), except the device is measured at t < 5 seconds.
10. For device with one active die, both collectors attached to a common heatsink.
11. For device with two active dice running at equal power, split heatsink 50% to each collector.
12. Thermal resistance from junction to solder-point (at the end of the collector lead).
R
JL
T
, T
J
STG
Diodes Incorporated
50 V
50 V
200 mA
13.6
179
95.50
-55 to +150
ZXTD09N50DE6
7 V
1 A
2 A
0.7
5.6
0.9
7.2
1.1
8.8
1.1
8.8
1.7
W
mW/°C
°C/W
°C
Product Line o
ZXTD09N50DE6
Document number DS33650 Rev. 5 - 2
2 of 7
www.diodes.com
January 2013
© Diodes Incorporated
A
f
Thermal Characteristics and Derating Information
Product Line o
Diodes Incorporated
ZXTD09N50DE6
ZXTD09N50DE6
Document number DS33650 Rev. 5 - 2
3 of 7
www.diodes.com
January 2013
© Diodes Incorporated
Loading...