Diodes ZXT951K User Manual

A

f

Features

• BV

• R

• Continuous Collector Current I

• Up to 15A Peak Current

• Low Equivalent On Resistance

• Low Saturation Voltage

• High Gain Holds Up (100 min @ 2A )

• Lead-Free Finish; RoHS compliant (Note 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

• Qualified to AEC-Q101 Standards for High Reliability

> -60V

CEO

= 53mΩ Typical

SAT

TO252

Top View

= -6A

C

Product Line o

Diodes Incorporated

Green

ZXT951K

60V PNP LOW SATURATION MEDIUM POWER TRANSISTOR

Mechanical Data

• Case: TO252 (DPAK)

• Case Material: Molded Plastic, "Green" Molding Compound. UL

Flammability Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish — Matte Tin; Solderable per MIL-STD-202,

Method 208

• Weight: 0.34 grams (approximate)

Application

• DC – DC converters

• Power Switches

• Motor Control

• Automotive Circuits

• Inverter Circuits

Device Schematic

Pin Out Configuration

Top view

Ordering Information (Note 4)

Product Marking Reel size (inches) Tape width (mm) Quantity per reel

ZXT951KTC ZXT951 13 16 2,500

Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.

2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

4. For packaging details, go to our website at http://www.diodes.com.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

Marking Information

ZXT

951

YYWW

ZXT951 = Product Type Marking Code YYWW = Date Code Marking YY = Last Digit of Year (ex: 09 = 2009) WW = Week Code (01 – 53)

ZXT951K

Document number: DS33642 Rev. 3 - 2

1 of 7

www.diodes.com

August 2012

A

f

Product Line o

Diodes Incorporated

ZXT951K

Maximum Ratings (@T

= +25°C, unless otherwise specified.)

A

Characteristic Symbol Value Unit Collector-Base Voltage Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Base Current Peak Pulse Collector Current

BV BV

V V

CEO EBO

I

CM

CBO CER

C B

-100 V

-60 V

-7 V

-6 A

-0.5 A

-15 A

Thermal Characteristics (@T

= +25°C, unless otherwise specified.)

A

Characteristic Symbol Value Unit

Power Dissipation

(Note 5) (Note 6) 3.2

P

D

2.1 W

(Note 7) 4.2

Thermal Resistance, Junction to Ambient Air

(Note 5) (Note 6) 39

R

θJA

59

°C/W

(Note 7) 30 Thermal Resistance, Junction to Leads (Note 8) Operating and Storage Temperature Range

Notes: 5. For the device mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions.

6. For the device mounted on 50mm x 50mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions

7. For the device mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions

8. Thermal resistance from junction to solder-point (at the end of the collector lead)

ZXT951K

Document number: DS33642 Rev. 3 - 2

2 of 7

www.diodes.com

R

T

J,TSTG

θJL

1.77

-55 to +150

°C/W

°C

August 2012

A

f

Typical Thermal Characteristics

V

10

CE(sat)

Limit

1

DC

1s

100m

100ms

T

=25°C

amb

Collector Current (A)

-I

C

10m

25mm x 25mm

1oz FR4

100m 1 10

10ms

1ms

-VCE Collec to r -Emitter Voltag e ( V)

Safe Operating Area

100µs

Product Line o

Diodes Incorporated

V

10

CE(sat)

Limit

1

DC

1s

100m

100ms

T

=25°C

amb

Collector Current (A)

-I

C

10m

50mm x 50mm

2oz FR4

0.1 1 10

10ms

-VCE Collector-Emitter Voltage (V)

Safe Operating Area

ZXT951K

1ms

100µs

60

T

=25°C

50

amb

25mm x 25 mm

1oz FR4

40

D=0.5

30 20

D=0.2

10

0

100µ 1m 10m 100m 1 10 100 1k

Thermal Resistance (°C/W)

Pulse Width (s)

Single Pulse

D=0.05

D=0.1

Transient Thermal Impedance

Single Pulse

T

=25°C

amb

100

50mm x 50mm

2oz FR4

10

25mm x 25 mm

1

100µ 1m 10m 100m 1 10 100 1k

Max Power Dissi pa t ion (W)

1oz FR4

Pulse Width (s)

Pulse Power Dissipation

30 25

T

=25°C

amb

50mm x 50mm

2oz FR4

20

D=0.5

15 10

D=0.2

5 0

100µ 1m 10m 100m 1 10 100 1k

Thermal Resistance (°C/W)

Pulse Width (s)

D=0.1

Single Pulse

D=0.05

Transient Thermal Impedance

4.5

4.0

3.5

3.0

2.5

50mm x 50mm

2oz FR4

25mm x 25 mm

1oz FR4

2.0

1.5

1.0

0.5

0.0 0 20 40 60 80 100 120 140 160

Max Power Dissi pa t ion (W)

Temperature (°C)

Derating Curve

ZXT951K

Document number: DS33642 Rev. 3 - 2

3 of 7

www.diodes.com

August 2012

A

f

)

Product Line o

Diodes Incorporated

ZXT951K

Electrical Characteristics (@T

= +25°C, unless otherwise specified.)

A

Characteristic Symbol Min Typ. Max Unit Test Condition

Collector-Base Breakdown Voltage Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 9) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Emitter Cutoff Current

BV BV BV BV

I

CBO

I

EBO

I

CER

CBO CER CEO EBO

-100 -125 - V

-60 -80 - V

-7 -8.1 - V

- <1 -20 nA

-

100

DC current transfer Static ratio (Note 9)

h

FE

100

50 15

-

Collector-Emitter Saturation Voltage (Note 9)

V

CE(sat)

-

Base-Emitter Saturation Voltage (Note 9) Base-Emitter Turn-on Voltage (Note 9)

Transitional Frequency Output capacitance Switching times

Notes: 9. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤2%.

V

C

BE(sat

BE(on

f

T

OBO

t

ON

t

OFF

- -1.05 -1.2 V

- -0.92 -1.05 V

- 120 - MHz

- 74 - pF

-

<1 <1

230 200 110

40

-13

-60

-115

-315

82

350

IC = -100µA IC = -100µA, RBE ≤1kΩ IC = -10mA IE = -100µA V

-10 nA

-20 nA

-

300

-

-25

-90

-165

mV

-400

V V I I

I

I I I I I IC = -6A, IB = -600mA IC = -6A, V I

f = 50MHz V

- nS

I I

= -80V

CB

= -6V

EB

= -80V, RBE ≤1kΩ

CE

= -10mA, V

C

= -2A, V

C

= -6A, V

C

= -10A, V

C

= -0.1A, IB = -10mA

C

= -1A, IB = -100mA

C

= -2A, IB = -200mA

C

= -6A, IB = -600mA

C

= -100mA, V

C

= -10V, f = 1MHz,

CB

= -2A, VCC = -10V,

C

= IB2 = -200mA

B1

CE CE

CE

= -1V = -1V

CE

= -1V

CE

= -10V

ZXT951K

Document number: DS33642 Rev. 3 - 2

4 of 7

www.diodes.com

August 2012

A

f

Typical Electrical Characteristics

1

Tamb=25°C

IC/IB=100

100m

(V)

CE(SAT)

- V

10m

1m 10m 100m 1 10

IC/IB=50

IC/IB=20

- IC Collector Curren t (A)

V

CE(SAT)

v I

C

IC/IB=10

Product Line o

Diodes Incorporated

0.6

IC/IB=10

0.5

0.4

(V)

0.3

0.2

CE(SAT)

- V

0.1

0.0 10m 100m 1 10

100°C

25°C

- IC Collecto r Current (A)

V

CE(SAT)

v I

C

ZXT951K

-55°C

1.4

1.2

1.0

0.8

0.6

0.4

Normalised Gain

0.2

0.0 1m 10m 100m 1 10

100°C

25°C

-55°C

- IC Collecto r C urrent (A)

(V)

BE(ON)

- V

hFE v I

1.4

VCE=1V

1.2

1.0

25°C

0.8

0.6

C

-55°C

VCE=1V

300

250 200

150 100

50 0

1.4

IC/IB=10

FE

1.2

1.0

-55°C

25°C

)

(V)

0.8

BE(SAT)

0.6

- V

Typical Gain (h

0.4 1m 10m 100m 1 10

100°C

- IC Collecto r Current (A)

V

BE(SAT)

v I

C

0.4 1m 10m 100m 1 10

100°C

- IC Collec tor C urrent (A)

V

ZXT951K

Document number: DS33642 Rev. 3 - 2

BE(ON)

v I

C

5 of 7

www.diodes.com

August 2012

A

f

Product Line o

Diodes Incorporated

ZXT951K

Package Outline Dimensions

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.

2X b2

E

b3

L3

D

L4

e

3X b

A

c2

A2

H

A1

L

a

E1

Dim Min Max Typ

A1 0.00 0.13 0.08 A2 0.97 1.17 1.07

b2 0.76 1.14 0.95 b3 5.21 5.46 5.33 c2 0.45 0.58 0.531

D1 5.21

E1 4.32

L3 0.88 1.27 1.08 L4 0.64 1.02 0.83

TO252

A 2.19 2.39 2.29

b 0.64 0.88 0.783

D 6.00 6.20 6.10

− −

e

− −

E 6.45 6.70 6.58

H 9.40 10.41 9.91 L 1.40 1.78 1.59

a 0° 10° All Dimensions in mm

2.286

− −

−

Suggested Pad Layout

Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.

ZXT951K

Document number: DS33642 Rev. 3 - 2

Y2

Y1

X1

X2

E1

Dimensions Value (in mm)

Z 11.6 X1 1.5 X2 7.0

Z

C

www.diodes.com

Y1 2.5 Y2 7.0

C 6.9 E1 2.3

6 of 7

August 2012

A

f

Product Line o

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use pr ovided in the labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonabl y expected to

cause the failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding an y devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Custom ers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safetycritical, life support devices or systems.

www.diodes.com

Diodes Incorporated

ZXT951K

Document number: DS33642 Rev. 3 - 2

7 of 7

www.diodes.com

August 2012