Diodes PDS5100Q User Manual

Product Summary

(V)

V

VR(V) IF (A)

100 5.0 0.79 0.2

F MAX

@ +25°C

I

(mA)

R MAX

@ +25°C

Description and Applications

This Schottky Barrier Rectifier has been designed to meet the

stringent requirements of Automotive Applications. It is ideally suited

to use as :

• Polarity Protection Diode

• Re-circulating Diode

• Switching Diode

Top View

POWERDI5

Bottom View

Green

PDS5100Q

5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER

Features and Benefits

• Guard Ring Die Construction for Transient Protection

• High Surge Current Capability

• Low Leakage Current

• Low Forward Voltage Drop

• High Forward Surge Current Capability

• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

• Qualified to AEC-Q101 Standards for High Reliability

• PPAP Capable (Note 4)

Mechanical Data

• Case: POWERDI5

• Case Material: Molded Plastic, “Green” Molding Compound. UL

Flammability Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish – Matte Tin annealed over Copper leadframe.

Solderable per MIL-STD-202, Method 208

• Polarity: See Diagram

• Weight: 0.093 grams (approximate)

LEFT PIN

RIGHT PIN

Note: Pins Left & Right must
be electrically connected

at the printed circuit board.

BOTTOMSIDE
HEAT SINK

POWERDI

®

Ordering Information (Note 5)

Part Number Compliance Case Packaging

PDS5100Q-13 Automotive POWERDI5 5000/Tape & Reel

Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.

4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.

5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.

Marking Information

POWERDI is a registered trademark of Diodes Incorporated.

PDS5100Q

Document number: DS36996 Rev. 1 - 2

S5100

YYWWK

S5100 = Product type marking code
= Manufacturers’ code marking
YYWW = Date code marking
YY = Last digit of year (ex: 14 for 2014)
WW = Week code (01 - 53)
K = Factory Designator

1 of 5

www.diodes.com

March 2014

© Diodes Incorporated

Maximum Ratings (@T

= +25°C, unless otherwise specified.)

A

Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.

Characteristic Symbol Value Unit

Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage

RMS Reverse Voltage

Average Rectified Output Current (See also figure 5)

Non-Repetitive Peak Forward Surge Current

8.3ms Single half sine-wave Superimposed on Rated Load

Thermal Characteristics

Characteristic Symbol Typ Max Unit

Thermal Resistance Junction to Soldering Point

Thermal Resistance Junction to Ambient Air (Note 6) TA = +25°C

Thermal Resistance Junction to Ambient Air (Note 7) TA = +25°C

Thermal Resistance Junction to Ambient Air (Note 8) TA = +25°C

Operating and Storage Temperature Range

V

R

R

R

R

T

J, TSTG

V

RRM

V

RWM

V

R(RMS)

I

I

FSM

JS

θ

JA

θ

JA

θ

JA

θ

PDS5100Q

R

O

100 V

71 V

5 A

120 A

⎯

90

70

50

2.6 °C/W

⎯

⎯

⎯

°C/W

°C/W

°C/W

-55 to +150 °C

Electrical Characteristics (@T

= +25°C, unless otherwise specified.)

A

Characteristic Symbol Min Typ Max Unit Test Condition

Reverse Breakdown Voltage (Note 9)

V

(BR)R

100

⎯

⎯

Forward Voltage

V

F

⎯

⎯

⎯

⎯

Reverse Leakage Current (Note 9)

I

R

⎯

⎯

Notes: 6. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com

7. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.

8. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.

9. Short duration pulse test used to minimize self-heating effect.

POWERDI is a registered trademark of Diodes Incorporated.

PDS5100Q

Document number: DS36996 Rev. 1 - 2

2 of 5

www.diodes.com

⎯ ⎯

0.74 0.79

0.64 0.68

0.60 0.64

0.81 0.89

0.68 0.73

0.002 0.2

0.5 5

2 20

V

IR = 200μA

I

= 5A, TS = +25°C

F

IF = 5A, TS = +100°C

V

IF = 5A, TS = +125°C

I

= 10A, TS = +25°C

F

IF = 10A, TS = +125°C

= +25°C, VR = 100V

T

S

mA

T

= +100°C, VR = 100V

S

TS = +125°C, VR = 100V

March 2014

© Diodes Incorporated