Diodes PDS5100H User Manual
Product Summary
V
R
(V)
100 5.0 0.71 0.0035
I
F
(A)
V
(V)
F MAX
@ +25°C
I
(mA)
R MAX
@ +25°C
Description and Applications
This Schottky Barrier Rectifier has been designed to meet the
stringent requirements of Automotive Applications. It is ideally suited
to use as:
Polarity Protection Diode
Re-circulating Diode
Switching Diode
POWERDI5
Top View
Bottom View
Ordering Information (Note 5)
Green
PDS5100H
5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
POWERDI
Features and Benefits
Guard Ring Die Construction for Transient Protection
High Maximum Junction Temperature
Very Low Leakage Current
Highly Stable Oxide Passivated Junction
Low Forward Voltage Drop
High Forward Surge Current Capability
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
PPAP Capable (See Note 4)
Mechanical Data
Case: POWERDI5
Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin annealed over Copper leadframe
Solderable per MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 0.096 grams (approximate)
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
®
5
Part Number Compliance Case Packaging
PDS5100H-13 AEC-Q101 POWERDI5 5000/Tape & Reel
PDS5100HQ-13 Automotive POWERDI5 5000/Tape & Reel
PDS5100HQ-13D (Note 6) Automotive POWERDI5 5000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
6. Suffix -13D is designated for 12mm tape width.
Marking Information
S5100H
YYWWK
S5100H = Product type marking code
= Manufacturers’ code marking
YYWW = Date code marking
YY = Last two digits of year (ex: 14 for 2014)
WW = Week code (01 - 53)
K = Factory Designator
POWERDI is a registered trademark of Diodes Incorporated.
PDS5100H
Document number: DS30471 Rev. 24 - 2
1 of 5
www.diodes.com
March 2014
© Diodes Incorporated
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
V
V
V
R(RMS)
I
RRM
RWM
V
R
I
O
FSM
100 V
71 V
5 A
250 A
Thermal Characteristics
Characteristic Symbol Typ Max Unit
Typical Power Dissipation (Note 9) PD 2.5
Thermal Resistance Junction to Case (Note 11)
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 7) TA = +25°C R
Thermal Resistance Junction to Ambient Air (Note 8) TA = +25°C R
Thermal Resistance Junction to Ambient Air (Note 9) TA = +25°C R
Operating and Storage Temperature Range
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
R
θJC
R
θJS
θJA
θJA
θJA
T
, T
J
STG
85
70
45
-65 to +175 °C
PDS5100H
5 °C/W
2.0 °C/W
W
°C/W
°C/W
°C/W
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 10)
V
(BR)R
100
Forward Voltage
V
F
Reverse Leakage Current (Note 10)
Notes: 7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
8. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
9. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
10. Short duration pulse test used to minimize self-heating effect.
11. Device mounted on Polymide 10cm x 10cm copper PC board,
POWERDI is a registered trademark of Diodes Incorporated.
PDS5100H
Document number: DS30471 Rev. 24 - 2
I
R
2 of 5
www.diodes.com
0.67
0.55
0.75
0.62
0.3
0.5
0.71
0.58
0.80
0.66
3.5
4.5
V
V
µA
mA
IR = 3.5µA
= 5A, TS = +25°C
I
F
I
= 5A, TS = +125°C
F
= 10A, TS = +25°C
I
F
I
= 10A, TS = +125°C
F
= +25°C, VR = 100V
T
S
T
= +125°C, VR = 100V
S
March 2014
© Diodes Incorporated
Loading...