Diodes PDS5100 User Manual
Features
• Guard Ring Die Construction for Transient Protection
• High Surge Current Capability
• Low Leakage Current
• Low Forward Voltage Drop
• High Forward Surge Current Capability
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
Top View
POWERDI5
Bottom View
Green
PDS5100
5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
Mechanical Data
• Case: POWERDI5
• Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Weight: 0.093 grams (approximate)
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
POWERDI
®
Ordering Information (Note 4)
Part Number Case Packaging
PDS5100-13 POWERDI5 5000/Tape & Reel
PDS5100Q-13D (Note 5) POWERDI5 5000/Tape & Reel
PDS5100-7 POWERDI5 1500/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
5. ”D" suffix designate for the 12mm Tape and Reel option.
Marking Information
POWERDI is a registered trademark of Diodes Incorporated.
PDS5100
Document number: DS30483 Rev. 11 - 2
S5100
YYWWK
S5100 = Product type marking code
= Manufacturers’ code marking
YYWW = Date code marking
YY = Last digit of year (ex: 04 for 2004)
WW = Week code (01 - 53)
K = Factory Designator
1 of 5
www.diodes.com
October 2012
© Diodes Incorporated
)
θ
θ
θ
θ
(BR)
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (See also figure 5)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
Thermal Characteristics
Characteristic Symbol Typ Max Unit
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 6) TA = +25°C
Thermal Resistance Junction to Ambient Air (Note 7) TA = +25°C
Thermal Resistance Junction to Ambient Air (Note 8) TA = +25°C
Operating Temperature Range
Storage Temperature Range
R
R
R
R
T
V
V
V
R(RMS
JS
JA
JA
JA
T
J
STG
RRM
RWM
V
I
I
FSM
PDS5100
R
O
100 V
71 V
5 A
120 A
⎯
90
70
50
2.6
⎯
⎯
⎯
°C/W
°C/W
°C/W
°C/W
-65 to +150 °C
-65 to +175 °C
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 9)
Forward Voltage
Reverse Leakage Current (Note 9)
Notes: 6. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com
7. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
8. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
9. Short duration pulse test used to minimize self-heating effect.
V
R
V
F
I
R
100
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯ ⎯
0.74 0.79
0.64 0.68
0.60 0.64
0.81 0.89
0.68 0.73
0.002 0.2
0.5 5
2 20
V
IR = 200μA
I
= 5A, TS = +25°C
F
IF = 5A, TS = +100°C
V
IF = 5A, TS = +125°C
IF = 10A, TS = +25°C
IF = 10A, TS = +125°C
T
= +25°C, VR = 100V
S
mA
TS = +100°C, VR = 100V
TS = +125°C, VR = 100V
POWERDI is a registered trademark of Diodes Incorporated.
PDS5100
Document number: DS30483 Rev. 11 - 2
2 of 5
www.diodes.com
October 2012
© Diodes Incorporated
Loading...