Diodes PDS4200H User Manual
Features
• Lower Forward Voltage Drop than Ultrafast Rectifiers
• Very Low Leakage Current
• Soft Recovery Characteristics: Softness Factor (t
figure 8)
• Highly Stable Oxide Passivated Junction
• High Forward Surge Current Capability
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
Top View
POWERDI5
) ≥ 1 (see
b/ta
Bottom View
Green
PDS4200H
4A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
POWERDI
Mechanical Data
• Case: POWERDI5
• Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Weight: 0.095 grams (approximate)
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
®
Ordering Information (Note 4)
Part Number Case Packaging
PDS4200H-13 POWERDI5 5000/Tape & Reel
PDS4200H-7 POWERDI5 1500/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
POWERDI is a registered trademark of Diodes Incorporated.
PDS4200H
Document number: DS30596 Rev. 10 - 2
S4200H
YYWWK
www.diodes.com
S4200H = Product type marking code
= Manufacturers’ code marking
YYWW = Date code marking
YY = Last two digits of year (ex: 06 for 2006)
WW = Week code (01 - 53)
K = Factory Designator
1 of 6
October 2012
© Diodes Incorporated
)
θ
θ
θ
θ
(BR)
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (See also figure 5)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
Thermal Characteristics
Characteristic Symbol Typ Max Unit
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 5)
Thermal Resistance Junction to Ambient Air (Note 6)
Thermal Resistance Junction to Ambient Air (Note 7)
Operating and Storage Temperature Range
PDS4200H
V
RRM
V
RWM
V
R
V
R(RMS
I
O
I
FSM
R
JS
R
JA
R
JA
R
JA
, T
T
J
STG
⎯
80
65
45
-65 to +175
200 V
141 V
4 A
100 A
3.0
⎯
⎯
⎯
°C/W
°C/W
°C/W
°C/W
°C
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 8)
V
R
200
⎯
⎯
Forward Voltage
V
F
⎯
⎯
⎯
⎯
Reverse Leakage Current (Note 8)
Reverse Recovery Time
Notes: 5. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
6. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
7. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
8. Short duration test pulse used to minimize self-heating effect.
I
R
t
rr
⎯
⎯
⎯ ⎯
⎯ ⎯
0.76
⎯
0.785
0.61
0.84
0.68
0.2
0.8
0.82
0.59
0.84
0.64
0.89
0.75
1
4
25 ns
V
V
μA
mA
IR = 5μA
I
= 3A, TS = +25°C
F
I
= 3A, TS = +150°C
F
= 4A, TS = +25°C
I
F
I
= 4A, TS = +150°C
F
= 8A, TS = +25°C
I
F
I
= 8A, TS = +150°C
F
= +25°C, VR = 200V
T
S
= +150°C, VR = 200V
T
S
I
= 0.5A, IR = 1.0A
F
I
= 0.25A (see Figure 8)
RR
POWERDI is a registered trademark of Diodes Incorporated.
PDS4200H
Document number: DS30596 Rev. 10 - 2
2 of 6
www.diodes.com
October 2012
© Diodes Incorporated
Loading...