Diodes PDS360Q User Manual
Product Summary
(V) IF (A)
V
R
(V)
V
F MAX
@ +25°C
I
(mA)
R MAX
@ +25°C
60 3.0 0.62 0.15
Description
This Schottky Barrier Rectifier has been designed to meet the
stringent requirements of Automotive Applications.
Applications
It is ideally suited to use as :
Polarity Protection Diode
Re-circulating Diode
Switching Diode
Top View
POWERDI5
Bottom View
Green
PDS360Q
3A SCHOTTKY BARRIER RECTIFIER
Features and Benefits
Guard Ring Die Construction for Transient Protection
Low Power Loss, High Efficiency
Low Reverse Leakage Current
For Use in High Frequency Inverters, Free Wheeling, and
Polarity Protection Applications
High Forward Surge Current Capability
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
PPAP Capable (Note 4)
Mechanical Data
Case: POWERDI5
Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 0.093 grams (approximate)
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
POWERDI
®
Ordering Information (Note 4)
Part Number Compliance Case Packaging
PDS360Q-13 Automotive POWERDI5 5000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
S360
YYWWK
S360 = Product type marking code
= Manufacturers’ code marking
YYWW = Date code marking
YY = Last two digits of year (ex: 14 for 2014)
WW = Week code (01 - 53)
K = Factory Designator
POWERDI is a registered trademark of Diodes Incorporated.
PDS360Q
Document number: DS36911 Rev. 1 - 2
1 of 5
www.diodes.com
February 2014
© Diodes Incorporated
)
(BR)
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (See also Figure 4)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on rated load
Thermal Characteristics
Characteristic Symbol Typ Max Unit
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 6) TA = +25°C
Thermal Resistance Junction to Ambient Air (Note 7) TA = +25°C
Thermal Resistance Junction to Ambient Air (Note 8) TA = +25°C
Operating and Storage Temperature Range
V
V
V
RRM
RWM
V
R
R(RMS
I
O
I
FSM
PDS360Q
R
JS
R
JA
R
JA
R
JA
T
, T
J
STG
60 V
42 V
3 A
100 A
95
70
50
3.0
-55 to +150
C/W
C/W
C/W
C/W
C
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 8)
Forward Voltage
Reverse Leakage Current (Note 8)
Notes: 6. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
7. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
8. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4 mm x 7.4 mm. Anode pad dimensions 2.7 mm x 1.6 mm.
9. Short duration pulse test used to minimize self-heating effect.
V
V
F
I
R
R
60
0.57 0.62
0.53 0.60
0.51 0.57
0.70 0.76
0.62 0.70
0.60 0.66
1.5 15 mA
V
V
3 150 μA
10 mA
IR = 0.2mA
= 3A, TJ = +25C
I
F
IF = 3A, TJ = +100C
IF = 3A, TJ = +125C
IF = 6A, TJ = +25C
IF = 6A, TJ = +100C
IF = 6A, TJ = +125C
T
= +25C, VR = 60V
J
TJ = +100C, VR = 60V
TJ = +125C, VR = 60V
POWERDI is a registered trademark of Diodes Incorporated.
PDS360Q
Document number: DS36911 Rev. 1 - 2
2 of 5
www.diodes.com
February 2014
© Diodes Incorporated
Loading...