Diodes PDS3100Q User Manual

Product Summary

VR

(V)

100 3.0 0.76 0.1

IF

(A)

V

(V)

F MAX

@ +25°C

I

(mA)

R MAX

@ +25°C

Description and Applications

This Schottky Barrier Rectifier has been designed to meet the

stringent requirements of Automotive Applications. It is ideally suited

to use as :

• Polarity Protection Diode

• Re-circulating Diode

• Switching Diode

Top View

POWERDI®5

Bottom View

Green

PDS3100Q

3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER

POWERDI

Features

• Guard Ring Die Construction for Transient Protection

• Low Power Loss, High Efficiency

• Low Reverse Leakage Current

• Low Forward Voltage Drop

• High Forward Surge Current Capability

• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

• Qualified to AEC-Q101 Standards for High Reliability

• PPAP Capable (Note 4)

Mechanical Data

• Case: POWERDI5

• Case Material: Molded Plastic, “Green” Molding Compound. UL

Flammability Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish – Matte Tin annealed over Copper leadframe

Solderable per MIL-STD-202, Method 208

• Polarity: See Diagram

• Weight: 0.093 grams (approximate)

LEFT PIN

RIGHT PIN

Note: Pins Left & Right must
be electrically connected

at the printed circuit board.

BOTTOMSIDE
HEAT SINK

®

5

Ordering Information (Note 4)

Part Number Compliance Case Packaging

PDS3100Q-13 Automotive POWERDI5 5000/Tape & Reel

PDS3100Q-7 Automotive POWERDI5 1500/Tape & Reel

Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.

4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the

same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.

5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.

Marking Information

POWERDI is a registered trademark of Diodes Incorporated.

PDS3100Q

Document number: DS33876 Rev. 1 - 2

S3100

YYWWK

S3100 = Product type marking code
= Manufacturers’ code marking
YYWW = Date code marking
YY = Last digit of year (ex: 14 for 2014)
WW = Week code (01 - 53)
K = Factory designator

1 of 5

www.diodes.com

February 2014

© Diodes Incorporated

Maximum Ratings (@T

= +25°C, unless otherwise specified.)

A

Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.

Characteristic Symbol Value Unit

Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage

RMS Reverse Voltage

Average Rectified Output Current (see also Figure 5)

Non-Repetitive Peak Forward Surge Current

8.3ms Single half sine-wave Superimposed on Rated Load

Thermal Characteristics

Characteristic Symbol Typ Max Unit

Thermal Resistance Junction to Soldering Point

Thermal Resistance Junction to Ambient Air (Note 6) TA = +25°C

Thermal Resistance Junction to Ambient Air (Note 7) TA = +25°C

Thermal Resistance Junction to Ambient Air (Note 8) TA = +25°C

Operating Temperature Range

Storage Temperature Range

Electrical Characteristics (@T

= +25°C, unless otherwise specified.)

A

V
V

V

R(RMS)

I

FSM

R

R

R

R

T

T

STG

RRM

RWM

V

R

I

O

JS

θ

JA

θ

JA

θ

JA

θ

J

PDS3100Q

100 V

70 V

3 A

90 A

⎯

95

70

50

-65 to +150

-65 to +175

6.0

⎯

⎯

⎯

°C/W

°C/W

°C/W

°C/W

°C

°C

Characteristic Symbol Min Typ Max Unit Test Condition

Reverse Breakdown Voltage (Note 9)

V

(BR)R

100

⎯

⎯

Forward Voltage

V

F

⎯

⎯

⎯

⎯

⎯

Reverse Current (Note 9)

I

R

⎯

⎯

Notes: 6. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.

7. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.

8. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.

9. Short duration pulse test used to minimize self-heating effect.

POWERDI is a registered trademark of Diodes Incorporated.

PDS3100Q

Document number: DS33876 Rev. 1 - 2

2 of 5

www.diodes.com

⎯ ⎯

0.71 0.76

0.61 0.65

0.57 0.61

0.78 0.84

0.68 0.75

0.64 0.68

2 100

μA

0.4 5 mA

2 20 mA

V

IR = 0.2mA

= 3A, TJ = +25°C

I

F

IF = 3A, TJ = +100°C

IF = 3A, TJ = +125°C

V

I

= 6A, TJ = +25°C

F

IF = 6A, TJ = +100°C

IF = 6A, TJ = +125°C

T

= +25°C, VR = 100V

J

TJ = +100°C, VR = 100V

TJ = +125°C, VR = 100V

© Diodes Incorporated

February 2014